Kenmore Elite 59676593602 bottom-mount refrigerator Parts

Common problems on the Kenmore Elite 59676593602 bottom-mount refrigerator include not cooling well, excess frost or moisture, ice maker or water dispenser issues, and new or louder-than-expected operating noises. Many fixes start with basic checks (power, controls, doors sealing) and then move to airflow, defrost, and water system components; see the 59676593602 owner's manual for model-specific troubleshooting steps.

Most common symptoms and what they usually point to

• Not cooling or warm temperatures: airflow restriction, evaporator fan issue, dirty condenser area, or a control/sensor problem
• Frost buildup or icing: defrost system issue or a door not sealing fully
• Water dispenser slow or tastes off: new filter needs flushing, low supply pressure, or a valve/supply issue
• Ice maker not filling: water supply problem or inlet valve not opening
• Buzzing, pulsating, hissing/rattling sounds: often normal operation (valve opening, fans/compressor adjusting, refrigerant movement)

Quick checks we recommend first (before replacing parts)

• Confirm the unit is plugged into a grounded outlet and the outlet has power.
• Make sure the temperature controls are turned on and set correctly.
• After a new install or major change, allow 24 hours to cool completely.
• Check that doors close fully and gaskets are clean and sealing.
• If water looks gray/dark after a filter change, flush the water system before regular use.

Parts that commonly relate to these problems (for this model)

Symptom	Common part to inspect	Example part for this model
Warm fridge section	Airflow/damper not opening	Refrigerator damper control WPW10196393
Warm temps, weak airflow	Evaporator fan not running	Evaporator motor WPW10128551
Frost buildup	Defrost heat not working	Refrigerator defrost heater WP67002493
No water to ice maker/dispenser	Valve not opening	Refrigerator water inlet valve assembly WP67006531

Why it matters

Cooling, frost control, and ice and water performance all depend on steady airflow and a reliable water supply. Catching issues early helps prevent food spoilage, ice buildup that blocks vents, and unnecessary compressor run time.

Last updated: January 2026

On the Kenmore Elite refrigerator model 59676593602, DH commonly indicates a defrost heating issue (the refrigerator is not sensing the expected temperature rise during defrost). This can lead to frost buildup on the evaporator and warmer-than-normal fresh food temperatures.

What you’ll usually notice

• Frost or ice buildup on the rear freezer panel
• Reduced airflow into the refrigerator section
• Refrigerator temperature creeping up while the freezer may still seem cold
• Fan noise changing as ice interferes with airflow
• Water leaking or refreezing from a restricted defrost drain

Quick checks we recommend (safe, no special tools)

1. Power reset: Unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
2. Look for airflow symptoms: If the refrigerator section is warm but the freezer is colder, suspect an airflow or defrost problem.
3. Inspect for heavy frost: If the freezer back wall is heavily frosted, defrost heat is likely not working correctly.
4. Confirm control settings: Review the control panel instructions in the 59676593602 owner's manual.

Parts that commonly cause a DH (defrost heat) problem

If the DH condition returns after a reset, these are the most common suspects on bottom-mount refrigerators:

Likely cause	What it affects	Example part for this model
Defrost heater not heating	Frost never melts off evaporator	Refrigerator defrost heater WP67002493
Evaporator fan not moving air	Poor cooling and uneven temps	Evaporator motor WPW10128551
Temperature sensing issue	Defrost cycle ends too soon or misreads temps	Refrigerator temperature sensor 12002355

Why it matters

A DH-related defrost problem can snowball into blocked airflow, warm refrigerator temperatures, and compressor overwork. Catching it early helps protect food and reduces strain on the sealed system.

Last updated: January 2026

For Kenmore Elite model 59676593602, the dependable way to get cubic feet is to match the model number to the capacity listed in the specifications or product data section of the 59676593602 owner's manual. If you need a quick estimate, measure the interior spaces and convert cubic inches to cubic feet.

Best ways to find the capacity

• Check the specifications/product data pages in the 59676593602 owner's manual.
• Look for the model and serial label inside the fresh food compartment (commonly on a side wall or near the crisper area); some labels list capacity.
• If your manual covers multiple similar models, confirm the exact model number (59676593602) before using the listed specs.
• Use measurement-based math when you only need an approximation.

How to estimate cubic feet (simple formula)

1. Measure the fresh food compartment interior width, depth, and height (in inches).
2. Measure the freezer compartment interior width, depth, and height (in inches).
3. Convert each compartment:
   • Cubic feet = (L × W × H) ÷ 1728
4. Add fresh food + freezer for an estimated total.

Step	What to measure	Units	Calculation
1	Fresh food interior L × W × H	inches	Multiply, then ÷ 1728
2	Freezer interior L × W × H	inches	Multiply, then ÷ 1728
3	Total capacity	cubic feet	Add both results

Why the model number helps, but does not give cubic feet by itself

The model number identifies the exact refrigerator version so you can pull the correct specification listing; cubic feet is provided in the product specifications rather than being something you reliably compute from the digits alone.

Why it matters

Knowing cubic feet helps you compare refrigerator sizes accurately, plan food storage, and choose compatible storage parts such as a refrigerator glass shelf WP67006704 when you are organizing or replacing interior components.

Last updated: January 2026