Kenmore 10650022211 refrigerator Parts

For Kenmore model 10650022211, the exact cubic-foot capacity is typically listed on the model and serial tag or in the specifications section of the 10650022211 owner’s manual. If you cannot locate a published capacity for your exact unit, you can estimate it by measuring the usable interior space and converting cubic inches to cubic feet.

Fast ways to find the capacity

• Check the model and serial tag inside the fresh food section (commonly on a side wall, ceiling, or near the crisper area).
• Look in the specifications section of the 10650022211 owner’s manual.
• If the label is worn or missing, measure and calculate the interior volume (see below).
• Use the full model number (10650022211) when comparing specs; similar-looking Kenmore 106 models can have different capacities.

How to calculate cubic feet (good estimate)

1. Empty the compartment enough to measure.
2. Measure the usable interior (not the outside cabinet):
   • Height (inches)
   • Width (inches)
   • Depth (inches)
3. Multiply: H x W x D = cubic inches.
4. Divide by 1728 to convert to cubic feet.

Quick conversion table

What you have	What to do	Result
Interior inches	H x W x D	Cubic inches
Cubic inches	Divide by 1728	Cubic feet (approx.)

Why it matters

Knowing cubic feet helps us match the right refrigerator parts and accessories (like shelves, bins, and filters) and also helps you compare energy use and storage space across side-by-side refrigerators.

Last updated: January 2026

On Kenmore side-by-side refrigerators like model 10650022211, the model number is printed on the appliance identification label. You will typically find that label inside the fresh food (refrigerator) compartment along the side wall or near the ceiling, and sometimes on the door frame.

Common places to check first

Look in these spots in order; they are the most common locations on side-by-side units:

• Inside the refrigerator compartment on the left or right side wall
• On the ceiling of the refrigerator compartment near the light housing
• On the door frame (the vertical face you see when the door is open)
• Behind the crisper drawers on the side wall (less common)
• On the back exterior panel near the lower area (least convenient, but possible)

For model-specific labeling notes and diagrams, use the 10650022211 manual.

What the label looks like (and what to write down)

The identification label usually includes both a model number and a serial number. We recommend writing down both before ordering parts or scheduling service.

Item on label	What it’s used for	Example format
Model number	Confirms exact design and compatible parts	10650022211
Serial number	Helps identify production run and revisions	Letters and numbers

Why it matters

Kenmore model numbers can look very similar across different production runs. Using the exact model number (and sometimes the serial number) helps us match the correct diagrams and compatible replacement parts, especially for items like an ice maker, water inlet valve, or control board.

Quick tip if you are ordering a water filter

Once you confirm the model number, you can match the correct filter style. For this model’s compatible option, see Kenmore refrigerator water filter 9081.

Last updated: January 2026

For Kenmore model 10650022211, the exact cabinet width cannot be confirmed from the model-specific information we have here. Most Kenmore side-by-side refrigerators are built to fit a 36-inch-wide opening, but the true “as-built” width can vary slightly by model and door/hinge design; check the rating label and the 10650022211 manual for the best match.

How to get the correct width for model 10650022211

Use these quick checks to avoid measuring the wrong point:

• Measure the cabinet (box) width, not just the doors
• Measure at the widest point (often the hinge side)
• Include handles only if you need “overall width with handles” for a tight doorway
• Confirm whether you need opening width (cutout) vs product width (appliance)
• If the refrigerator is installed tight, pull it forward slightly before measuring

Typical side-by-side width ranges (what you’ll usually see)

These ranges help when you are planning a space, but we still recommend confirming the exact spec for your unit.

Measurement type	Typical range	What it’s used for
Opening (cutout) width	36 in	Cabinet and countertop planning
Cabinet width	~35 to 36 in	True appliance footprint
Overall width with handles	often wider than cabinet	Doorway and clearance planning

Why it matters

A difference of even 1/2 inch can decide whether doors swing freely, the unit can be rolled into place, or the water line kinks behind the cabinet. Getting the cabinet width right also helps when you’re ordering door-related parts like a hinge or gasket.

Related part note (when width questions come up during a move)

If you’re removing doors to fit through a doorway, keep track of hinge hardware and alignment. If you later find the door isn’t sealing well, a worn gasket can cause warm air leaks and sweating.

• Example replacement option for this model: refrigerator door gasket 2159083

Last updated: January 2026