Kenmore 66513614101 compactor Parts

Your Kenmore model 66513614101 is a trash compactor, not a refrigerator, so it does not have a refrigerator-style “cubic feet” capacity rating. For the correct capacity and specifications for this compactor, use the model and serial label information and the specs listed in the owner's manual.

How to confirm you have the right model (fast checks)

• Look for the model and serial number label on the compactor (the manual shows where it’s located).
• Confirm the model number reads 66513614101 exactly.
• If you were trying to size a refrigerator, re-check the appliance type; refrigerators typically list capacity in cu. ft. on the rating plate.
• Record the model number, serial number, and purchase date for future parts matching.

Where “capacity” applies for a trash compactor

Trash compactors are usually described by:

• Bag size and fit (using the correct compactor bags)
• Drawer/bin volume (not typically marketed the same way as refrigerator cu. ft.)
• Compaction performance (cycle operation and ram travel)

A practical way to “size” your unit is to use the correct bags and carrier system for your model.

Parts that relate to usable capacity (bags and fit)

If your question is really about how much trash the unit holds between bag changes, these parts matter most:

What you’re sizing	What to use	Why it helps
Bag capacity per change	Trash compactor bag, 15-pack W10165295RP	Correct fit helps prevent tears and slipping
Stocking up for frequent use	Trash compactor bag, 60-pack W10165294RB	Fewer reorders, consistent fit
Bag support and alignment	Carrier 13030RP	Helps keep the bag positioned correctly in the drawer

Why it matters

Using refrigerator cubic feet to estimate a trash compactor’s capacity leads to the wrong expectation. For model 66513614101, the best “capacity” indicator is correct bag fit and proper drawer setup, which keeps cycles running smoothly and reduces mess.

Last updated: February 2026

Kenmore model numbers tell us the product family and who built the unit; for your Kenmore trash compactor, the full model number is 66513614101 (often shown as 665.13614101 in documentation). Use the complete number from the model and serial label to match the correct parts and procedures in the owner's manual.

Where to find the model number on a Kenmore trash compactor

On model 66513614101, the manual notes the model and serial label location is shown in the “Parts and Features” section. Use these quick checks:

• Open the compactor drawer and look around the door frame area
• Check the inside edge of the cabinet opening (near the latch side)
• Look on the side wall just inside the opening (left or right)
• If needed, pull the unit forward and check the back or side panel label

How to interpret the digits (what matters for parts)

Kenmore numbers are most useful when you read them in chunks.

Example from your model	What it tells us	Why it matters
665	Manufacturer prefix used on many Kenmore units	Helps narrow the correct parts system and diagrams
13614101	Model series and configuration	Determines the exact switches, motor parts, drawer parts, and trim options

Tips that prevent ordering the wrong part

• Use the entire model number, not just the first 3 digits
• Copy it exactly from the label (include all digits)
• If the manual shows a dot format (example: 665.13614101), treat it as the same model
• Match parts by model first, then confirm by part name and part ID

Why it matters

Trash compactors use model-specific components (like switches, drawer slides, and drive parts). Entering the full model number ensures we show parts that fit your exact Kenmore 66513614101, so repairs and maintenance go smoothly.

Last updated: February 2026

A Kenmore trash compactor like model 66513614101 typically lasts 10 to 15 years with normal household use. Regular cleaning, correct bag use, and keeping the drive system lubricated help it reach the upper end of that range; see the 66513614101 owner's manual for care and safety guidance.

What affects lifespan most

• Load type and frequency: heavy, frequent cycles wear the motor and drive faster.
• Overfilling: stresses the ram, drive chain, and drawer slides.
• Bag fit and changes: torn or mis-seated bags can cause messes and extra strain.
• Cleaning routine: residue buildup can lead to odors and corrosion.
• Mechanical wear items: switches, bearings, and drive components wear over time.

Maintenance that extends life

• Wipe down the drawer and interior surfaces regularly; keep liquids out of the cabinet.
• Do not compact glass, hot ashes, or hazardous materials.
• Use the correct bags and replace them before they overfill.
• If the drawer starts binding, inspect slides and alignment before forcing it.
• If you hear grinding or popping, stop using it and check the drive components.

Common “end-of-life” symptoms and likely areas

Symptom	What it often points to	Example part on this model page
Won’t start or stops mid-cycle	Switches, interlocks, wiring	Trash compactor switch assembly 9871821
Loud clicking/grinding	Drive chain/gear, bearings	Kenmore elite trash compactor drive chain 780477
Ram does not move smoothly	Ram slide, bearings, drive screw	Ram slide W10917246

Why it matters

Knowing the typical 10 to 15 year lifespan helps you decide whether to maintain and repair your 66513614101 (often cost-effective for switches, bags, and slides) or plan for replacement if major drive or motor issues stack up.

Last updated: March 2026