Amana NFW5800HW3 washer Parts

To determine the age of your Amana washer (model NFW5800HW3), we use the serial number from the model tag. The serial format encodes the manufacturing date; once you locate the tag and write down the serial, you can decode the year and week it was built.

1) Find the model and serial tag

On most Amana front-load washers like NFW5800HW3, the tag is typically in one of these spots:

• Along the door opening (on the cabinet frame behind the door)
• On the inside of the door itself
• On the rear panel of the washer
• Occasionally behind the lower front access area

Write down both the model number and the serial number exactly as shown.

2) Decode the serial number (what the characters mean)

Many Amana washers use a Whirlpool-family serial format where the serial includes a year code and a week-of-year code.

• The year is encoded by a letter in the serial
• The week is often shown as two digits (01 to 52)

Because serial formats can vary by production run, the most reliable approach is to match the serial pattern to a Whirlpool-family decoder and then confirm the result against your purchase or installation date.

Quick example (how to read it)

Serial detail	What it tells you	Example output
Year code (letter)	Manufacturing year	2021
Week code (2 digits)	Week of that year	Week 34

3) If the tag is missing or unreadable

If the label is damaged, we use these practical checks to narrow it down:

• Check your receipt, delivery paperwork, or installer invoice
• Look for a date stamp on the control board area (service techs often note this)
• Compare the washer’s features to parts used on this model, such as the inglis washer electronic control board W11550652

Why it matters

Knowing the build date helps us match the correct Amana parts (like a water valve, door lock, or drain pump), confirm warranty timing, and avoid ordering a similar-looking part that fits a different production version.

Last updated: February 2026

Amana front load washers (including model NFW5800HW3) are made under the Whirlpool family of brands; Amana is a Whirlpool-owned brand, and Whirlpool manufactures and supports the product line.

Quick brand background

Amana has changed ownership over time; today, the Amana appliance brand is part of Whirlpool. That is why you will often see Whirlpool-style parts and engineering used across Amana, Maytag, and Whirlpool laundry products.

What this means when you buy parts for NFW5800HW3

When you are troubleshooting or ordering replacement parts for your Amana washer, you are typically working with Whirlpool-manufactured components and common Whirlpool-family designs.

Common examples on this model include:

• A drain system that uses a complete pump assembly such as the washer drain pump assembly W11458345
• A fill system that uses an inlet valve such as the water valve W11688995
• A door safety system that uses a door lock such as the ha15g janus- W11565030

Helpful comparison: brand name vs. manufacturer

What you see	What it usually means	Why it matters
Amana on the washer	The consumer-facing brand	Use the exact model number NFW5800HW3 to match parts
Whirlpool-family parts	Shared manufacturing and designs	Many repair steps and parts styles are consistent across the family

Why it matters

Knowing who makes the washer helps you choose compatible parts and follow the right repair approach. For example, fill problems often point to the inlet valve, and drain problems often point to the pump or drain hose.

If you are diagnosing a control-related issue, we also recommend reading how to replace the timer and control parts on an Amana top load washer for general control-part replacement tips (the exact access steps can differ on a front load washer).

Last updated: February 2026

Yes. On the Amana NFW5800HW3 front-load washer, the main “filter” you maintain is the drain pump filter (often called the pump cleanout). Cleaning it regularly helps prevent slow draining, standing water, and drain pump strain.

Where the filter is and what it does

In most front-load washers, the pump filter sits in the drain path just before the drain pump. It catches lint, coins, hair pins, and small items so they do not jam the pump.

Common symptoms the filter needs cleaning:

• Water left in the drum after the cycle
• Slow drain or long cycle times
• Rattling or grinding noise during drain
• Musty odor from trapped debris
• Intermittent “won’t drain” behavior

How to clean the drain pump filter (safe, basic steps)

1. Unplug the washer.
2. Place towels and a shallow pan at the front of the washer.
3. Open the lower access area (some models use a small panel; others require removing the lower front panel).
4. Slowly loosen the filter cap to let water drain into the pan.
5. Remove debris, rinse the filter, and wipe the housing.
6. Reinstall the filter cap firmly, then run a quick rinse and drain to check for leaks.

Parts that are commonly involved when draining problems continue

If cleaning the filter does not restore normal draining, these model-matched parts are common next checks:

What we check	What it affects	Model-matched part to consider
Drain pump operation and impeller	Draining, noise, intermittent drain	Washer drain pump assembly W11458345
Drain hose condition and kinks	Slow drain, siphoning, leaks	Hose assy-dr W11549455
Pressure sensing (water level)	Overfill, underfill, drain logic	Pressure sen W11316246

Why it matters

A clogged pump filter forces the washer to work harder to drain. That can lead to poor cleaning results, odors, and premature wear on the drain system.

Helpful DIY guidance

For a visual walkthrough that matches this style of washer, use our guide: cleaning the drain pump filter on a front load washer with no access door video.

Last updated: February 2026

For the Amana washer model NFW5800HW3, a replacement electronic control board typically costs about $200 to $350 for the part alone, and total installed cost is commonly about $300 to $600 depending on labor rates and what else is found during diagnosis.

What you will usually pay (parts vs. installed)

Control board pricing varies by model and revision, but these ranges are realistic for front-load washers like the NFW5800HW3.

Cost item	Typical range	What affects it most
Control board (part only)	$200 to $350	Board version, availability
Service labor	$100 to $250	Local rates, trip/diagnostic fees
Total installed	$300 to $600	Diagnosis time, extra parts needed

Parts that are commonly involved with “control board” problems

A washer can act like it needs a board when the real issue is a lock, sensor, or wiring problem. Before replacing the board, we check these common causes:

• Door not locking consistently (often points to the ha15g janus- W11565030)
• Intermittent power or loose connections at the harness
• Drain problems that stop the cycle (often tied to the washer drain pump assembly W11458345)
• Fill problems that trigger errors or long fill times (often tied to the water valve W11688995)
• Pressure sensing issues (pressure switch hose or sensor)

How we recommend confirming the board is the problem

These steps help avoid buying an expensive part you do not need:

1. Reset power: Unplug the washer (or switch off the breaker) for 2 minutes, then retry.
2. Verify the door lock: If the door will not lock, the control often will not start or spin.
3. Check fill and drain basics: Confirm water supply valves are fully open and the drain path is not restricted.
4. Inspect wiring: Look for loose plugs, corrosion, or pinched wires at the control and door lock.

Why it matters

The control board is one of the highest-cost electrical parts in a washer. A quick check of the door lock, drain pump, and water valve often identifies a simpler fix that restores normal cycles and prevents repeat failures.

Last updated: February 2026