Kenmore 25370622410 refrigerator Parts

If you are looking at this Kenmore top-mount refrigerator parts page, the model is 25370622410. To confirm on the refrigerator itself, check the serial plate inside the fresh food (refrigerator) compartment; it lists the model and serial number for your exact unit (and it is the number you should use when ordering parts).

Where to find the model number on Kenmore 25370622410

On this model, the Use & Care Guide notes the model and serial information is on the serial plate located inside the refrigerator compartment. Use only soap and water to clean that label so the numbers stay readable. See the 25370622410 owner's manual.

Common places to look inside the fresh food section:

• Side wall near the top front
• Ceiling area near the light housing
• Behind or beside the crisper drawers
• Near the lower front frame (sometimes visible when drawers are removed)

How to read what you find (and why it matters)

Kenmore model numbers are the key to matching the correct door gasket, ice maker, control board, and other parts. Even small differences in a series can change fit and wiring.

Use this quick check

What you see on the label	What it means	What to do next
25370622410	Exact match to this page	Use this number for parts lookup and ordering
Starts with 253. then more digits	Same Kenmore family format	Write the full number exactly as shown
Label is hard to read	Dirt or smudging on the serial plate	Clean gently with soap and water, then re-check

If you are ordering parts after you find the model

Once you confirm the model number, order from the parts list for Kenmore 25370622410 on this page. For broader model searches and diagrams, use Sears PartsDirect.

Parts that commonly require an exact model match include:

• Door gaskets (fresh food and freezer)
• Ice maker assemblies
• Electronic control boards
• Evaporator fan motors and temperature sensors

Why it matters

Using the exact model number prevents wrong-part returns and helps ensure proper fit, correct electrical connectors, and correct temperature control performance.

Last updated: February 2026

A Kenmore top-mount refrigerator like model 25370622410 lasts 12 to 15 years. Consistent temperature control, clean airflow around the condenser area, and tight door seals keep the compressor and fans from overworking, which helps the refrigerator and freezer reach that full lifespan.

Typical lifespan and what affects it

Most refrigerators in this class reach their full service life when these conditions stay in check:

• Stable room temperature and good ventilation around the cabinet
• Doors closing fully every time (no gaps at the gasket)
• Coils and fan area kept free of dust and pet hair
• Temperature controls adjusted gradually and given time to stabilize
• Ice maker and defrost system kept from icing up or leaking

For model-specific operating guidance (including temperature control basics), use the 25370622410 owner's manual.

Maintenance that extends life (high impact)

These steps reduce run time and heat load, which protects the compressor and control system:

• Set controls to a normal starting point, then wait 24 hours before making another adjustment.
• Avoid blocking air vents inside the fresh food and freezer compartments.
• Limit long door openings; warm air forces longer cooling cycles.
• Keep door seals clean; wipe with mild soap and water and dry fully.
• Listen for fan noise changes; a struggling fan can raise temperatures and increase compressor run time.

Quick troubleshooting guide: symptoms vs likely wear items

Symptom	What it often points to	Example part for this model
Warm fridge or freezer, weak airflow	Evaporator fan issue	Refrigerator evaporator motor 242077705
Warm cabinet, hot compressor area, poor heat removal	Condenser fan issue	Refrigerator condenser fan motor 242018301
Frost buildup, temperature swings after defrost	Sealed system or airflow restriction	Check airflow first; then review service options
Doors not sealing, moisture, icing near edges	Worn gasket	Refrigerator freezer door gasket 242193220

Why it matters

A refrigerator that runs longer to maintain temperature wears out the compressor, fan motors, and electronic controls faster. Keeping airflow clear and seals tight reduces run time, improves food safety, and helps your Kenmore 25370622410 reach the full 12 to 15 year lifespan.

If you decide to replace parts, we list model-matched options on this page; you can also search by model number on Sears PartsDirect.

Last updated: February 2026

Common Kenmore Elite refrigerator problems usually come down to cooling and control issues: the compressor may not start or may run too long, the ice maker can stop producing ice, and the electronic control board can cause erratic temperatures or no-cool symptoms. For your Kenmore 25370622410, use the 25370622410 owner's manual troubleshooting tables to match symptoms to the most likely cause.

Most common symptoms we see

• Refrigerator not cooling or cooling unevenly (fresh food warm, freezer OK or vice versa)
• Compressor not running, or cycling on and off frequently
• Refrigerator runs too much or too long (especially after door openings)
• Ice maker not making ice, slow ice production, or poor ice quality
• Moisture or frost inside the cabinet (often tied to door seal leaks)

Quick checks before replacing parts

These steps solve many “not working” complaints without parts.

• Confirm the outlet has power; reset a tripped breaker if needed.
• Wait out a normal defrost cycle (about 30 minutes) if the compressor is temporarily off.
• Set controls one step warmer or colder as needed; allow 24 hours for temperatures to stabilize.
• Make sure doors close fully; keep food packages from blocking the door.
• Clean and inspect door gaskets; leaks make the unit run longer to hold temperature.

Parts that commonly fix these problems

If the quick checks do not help, these are frequent repair paths for this model family.

Symptom	Likely area	Example part on this model page
No ice or intermittent ice	Ice maker system	Refrigerator ice maker 241798231
Warm temps, weak airflow	Evaporator fan/air movement	Refrigerator evaporator motor 242077705
Erratic temps or no-cool behavior	Controls/sensors	Refrigerator electronic control board 5303918679 or refrigerator temperature sensor 240597220
Runs constantly, moisture/frost	Door seal leak	Frigidaire refrigerator door gasket (white) 242193213 or refrigerator freezer door gasket 242193220

Why it matters

A refrigerator that runs too long, has door seal leaks, or has poor airflow can’t maintain stable temperatures. That leads to food spoilage risk, excess frost, and higher energy use. Fixing the root cause (controls, airflow, ice maker, or gaskets) restores normal cycling and consistent cooling.

Helpful DIY guidance

For ice maker-related symptoms (no ice, slow ice, clumping), we recommend using common refrigerator ice maker problems and solutions alongside the manual’s “Before you call” section.

You can order replacement parts for Kenmore 25370622410 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Kenmore top-mount refrigerator model 25370622410 uses standard top-freezer sizing, but the exact exterior width, height, depth, and capacity vary by sub-model. For the precise cabinet dimensions and fit notes for your unit, use the specifications section in the 25370622410 owner's manual.

How to confirm the correct “size” (dimensions vs. capacity)

“Size” can mean exterior dimensions (fit in the opening) or interior capacity (cubic feet). Use these steps to confirm both:

• Check the specifications/dimensions pages in the 25370622410 owner's manual
• Measure your current refrigerator width, height, and depth at the widest points
• Measure the cabinet opening in three places (top, middle, bottom) for width and height
• Account for door swing and clearance to fully open drawers and bins
• Plan for required airflow clearances from the 25370622410 installation guide

Installation clearances we use for this model

The installation instructions for this Kenmore 253-series top-mount call out these minimum clearances for airflow and hookups:

Clearance location	Minimum guideline
Sides and top	3/8 inch
Rear	1 inch

Typical top-mount refrigerator size range (helpful for planning)

Most Kenmore top-mount refrigerators in this style commonly fall into these ranges (your exact unit can differ):

• Width: 28 to 33 inches
• Height: 61 to 67 inches
• Depth (cabinet): 26 to 32 inches

Why it matters

Getting the exact dimensions right prevents installation problems like poor air circulation, doors that do not align or seal well, and difficulty connecting the power cord or water line for an ice maker.

If you need replacement parts while you measure, you can order model-matched parts from the list for 25370622410 or search by model on Sears PartsDirect.

Last updated: February 2026