Kenmore Elite 25344383400 refrigerator Parts

On Kenmore side-by-side refrigerators like model 25344383400, the model number is printed on the serial plate located inside the refrigerator (fresh food) compartment. Open the refrigerator door and look along the interior walls near the top area for the label; it lists both the model and serial number.

How to find it quickly

• Open the refrigerator door (not the freezer door).
• Look inside the fresh food compartment for the serial plate.
• Check the upper side wall or near the top interior area.
• Read the line that starts with Model Number (often shown as 253- followed by more digits).
• Use soap and water only if you need to clean the label so it stays readable.

What you will see on the serial plate

The serial plate typically includes both identifiers you need for parts and service.

Label item	What it’s used for	Example format
Model number	Matching the correct parts diagrams and parts list	253-XXXXXXX
Serial number	Identifying production details for your unit	Letters and numbers

Why it matters

We use the exact model number to match the right Kenmore Elite refrigerator parts for your configuration (shelves, dispenser components, filters, and electrical parts). Even small model number differences can change which parts fit.

For model-specific details and diagrams, we recommend checking the owner's manual.

Last updated: February 2026

Your Kenmore Elite refrigerator model 25344383400 is a side-by-side unit; its exact cubic-foot capacity is listed on the model’s rating label and in the 25344383400 owner's manual. Use those two sources to match the correct capacity for your specific configuration.

Where to find the cubic-foot capacity

Check these spots first (fastest to most common):

• Rating label inside the fresh food compartment (often on a side wall near the crisper area)
• Inside the freezer compartment side wall
• Behind the toe grille (lower front) on some installations
• The specifications section of the 25344383400 owner's manual

Quick capacity guide (what the number means)

Cubic feet is the total interior storage volume. It helps you compare refrigerators and choose correctly sized parts and accessories (like bins and filters).

Capacity range (cu. ft.)	Typical fit for a side-by-side	What you can expect
20 to 23	Smaller standard-depth	Less freezer width, fewer door bins
24 to 27	Most common	Balanced fridge and freezer storage
28 to 31	Large capacity	More shelf space and larger bins

Why it matters

Knowing the correct cubic-foot capacity helps when you are:

• Comparing your refrigerator to a replacement
• Planning kitchen space and food storage
• Ordering the right consumables and accessories (for example, the genuine Kenmore refrigerator water filter WF2CB and refrigerator air filter AFCB)

Tip: confirm you are using the full model number

For Kenmore Elite refrigerators, small model-number differences can change the published capacity. Always match the full model number 25344383400 from the rating label before relying on a spec.

Last updated: February 2026

For the Kenmore Elite side-by-side refrigerator model 25344383400, the exact cabinet dimensions (height, width, depth) are listed in the product specifications section of the 25344383400 installation guide. Use those measurements for fit, door swing clearance, and moving the unit through doorways.

How to measure your refrigerator the right way

Even with published specs, we recommend confirming your actual in-home measurements before ordering doors, handles, or planning a kitchen cutout.

• Measure width at the widest point (often the hinge side or handles)
• Measure height from floor to top hinge cover (include leveling legs if extended)
• Measure depth in two ways: cabinet only, and to the front of handles
• Leave clearance for door swing and for pulling out crisper/deli drawers
• Confirm the floor is level; leveling affects door alignment and perceived height

Typical side-by-side size ranges (for planning)

If you are comparing models, most full-size side-by-side refrigerators are commonly in these ranges:

Measurement	Typical range	What to watch for
Width	32 to 36 in.	Handles and hinge covers can add width
Height	65 to 71 in.	Leveling legs and top hinge area
Depth	30 to 35 in.	Counter-depth vs standard-depth

Why it matters

Correct dimensions prevent installation problems like doors hitting walls, poor airflow around the cabinet, and drawers that cannot fully open. It also helps when replacing fit-sensitive parts such as a refrigerator door handle 241531402 or a refrigerator crisper 240351061.

Last updated: February 2026

Your Kenmore Elite refrigerator’s model number is printed on the appliance’s rating label; on model 25344383400, it’s typically inside the fresh food compartment or freezer compartment on an interior wall, or on a label behind the lower crisper area or near the kick plate. Confirm the exact characters on the label, then match them to the parts list and owner's manual.

Where to look for the model number label

Check these common locations on Kenmore side-by-side refrigerators:

• Inside the refrigerator compartment on a side wall (often near the top)
• Inside the freezer compartment on an interior wall
• On the wall behind or near the lower crisper drawers
• Near the front bottom area, behind the kick plate or toe grille
• Along the door frame area (visible when the door is open)

How to read the label correctly

Model numbers and serial numbers can look similar. Use these tips so you capture the right information:

• Write down the full model number exactly as shown (letters, numbers, and any dashes)
• Take a clear photo of the label before ordering parts
• Look for wording like “Model” or “Model No.” on the tag
• Do not use the serial number for parts lookup
• If the label is worn, use a flashlight and read it at an angle

Why the exact model number matters

Kenmore Elite refrigerators can share a similar look but use different parts for the water system, dispenser, lighting, and cooling. Using the exact model number helps us match the correct diagrams and parts, such as the refrigerator light bulb 316538904 or the genuine Kenmore refrigerator water filter WF2CB.

Quick reference: model vs. serial

What you see on the label	What it’s used for	Example format
Model number	Finding correct parts and diagrams	25344383400
Serial number	Manufacturing tracking and service history	Mix of letters and numbers

Last updated: February 2026

Common problems on the Kenmore Elite 25344383400 side-by-side refrigerator are weak or inconsistent cooling, long run times, moisture or water buildup, dispenser or ice maker trouble, and interior light issues. Many of these trace back to airflow restrictions, door sealing problems, or normal defrost and temperature-control conditions described in the owner's manual.

Most common symptoms and what they usually mean

• Not cooling well or temperatures too warm: blocked air vents, doors not sealing, or controls set too warm.
• Runs too much or too long: frequent door openings, warm room conditions, or a door slightly open.
• Moisture on inside walls: hot/humid weather, door opened often, or door slightly open.
• Water in drawers or under crisper cover: normal moisture from produce or wet items placed in drawers.
• Lights out: a failed appliance bulb (often a 40-watt appliance bulb) or a loose/bad socket connection.

Quick checks we recommend first (before replacing parts)

1. Confirm door closure and sealing: make sure both doors fully close and nothing is holding them open.
2. Give temperature changes time: after adjusting controls, allow 24 hours for temperatures to stabilize.
3. Reduce warm air intrusion: open doors less often and for shorter periods.
4. Cover foods and containers: uncovered liquids increase internal moisture.
5. Check for normal defrost behavior: a defrost cycle is normal and can last about 30 minutes.

Parts that commonly relate to these problems

If basic checks do not solve the issue, these model-compatible parts are often involved:

Symptom	Common part area	Example part for this model
Frost buildup, warming, or odd cycling	Defrost system	Refrigerator defrost bi-metal thermostat 5303918214
Warm fresh food section, weak airflow	Evaporator airflow	Refrigerator evaporator fan blade 5308000010
Bad taste/odor in water, slow dispensing	Water filtration	Genuine Kenmore refrigerator water filter WF2CB
Odors in fresh food section	Air filtration	Refrigerator air filter AFCB
Interior light not working	Lighting	Refrigerator light bulb 316538904

Why it matters

Cooling and moisture complaints are often caused by small airflow or sealing issues that make the compressor run longer and temperatures drift. Catching a door-seal or airflow problem early helps protect food quality and reduces strain on the sealed refrigeration system.

Last updated: February 2026