Kenmore Elite 79075403502 gas range Parts

Kenmore Elite gas ranges (including model 79075403502) are made for Kenmore by outside manufacturers (OEMs), not by Kenmore itself. The exact OEM can vary by model series and production run, so we use your model number and documentation to identify the correct parts and service information.

How to identify the manufacturer for your specific range

The most reliable way is to match the model and serial information on the appliance to the documentation and parts listings.

• Check the serial plate on the range (often behind the oven door frame area).
• Match the full model number exactly: 79075403502.
• Use the parts diagrams and descriptions to confirm component families (burner, igniter, control).
• Reference the documentation for model series details and labeling.

For model-specific labeling and serial plate location, use the 79075403502 owner's manual.

Why the OEM matters when ordering parts

Different OEMs can use different igniters, sensors, burner heads, and control styles even when the range looks similar. Ordering by model number helps ensure correct fit, gas compatibility, and wiring connections.

What you’re doing	Best identifier to use	Why it works
Buying replacement parts	Model number + part ID	Prevents look-alike part mix-ups
Troubleshooting bake not heating	Symptom + oven component	Points to igniter, gas valve, sensor
Confirming installation requirements	Installation instructions	Ensures correct gas hookup and clearances

Common parts that are often OEM-specific

If you are diagnosing a heating or ignition issue, these are frequently involved on gas ranges:

• Range bake igniter 5303935066 (weak igniter can prevent the bake burner from lighting)
• Range oven temperature sensor 5304504897 (incorrect readings can cause temperature problems)
• Range pressure regulator 5304521339 (gas supply regulation and conversion compatibility)

Why it matters

Kenmore is a brand; the manufacturing is outsourced. Using the exact model number 79075403502 and the correct part IDs is what ensures you get the right Kenmore Elite gas range parts and the right repair approach.

Last updated: February 2026

If your Kenmore Elite gas range 79075403502 clicks but the oven will not light, the most common cause is a weak oven igniter that is sparking or drawing power but not getting hot enough to open the oven gas valve. Power supply issues and control settings can also prevent ignition.

Quick checks we recommend first

• Confirm the range has power (the oven and broiler use electrical ignition and will not operate during a power failure).
• Turn the oven controls fully OFF, wait 60 seconds, then set BAKE again.
• If the igniter glows but the burner never lights, treat it as a weak igniter.
• If you smell gas without ignition, turn everything OFF, ventilate the area, and stop troubleshooting until the gas clears.
• If surface burners light normally but the oven does not, focus on the oven igniter, sensor, and gas valve circuit.

Parts that commonly fix “clicking but no light” on this model

Symptom	Most likely area	Part to consider (if applicable)
Clicking, no flame, igniter looks damaged or weak	Oven ignition	Range bake igniter 5303935066
Oven heats erratically or won’t regulate temp	Temperature sensing	Range oven temperature sensor 5304504897
No ignition even with a good igniter (less common)	Gas delivery/control	Professional diagnosis recommended (gas valve/regulator)

Safe, practical troubleshooting steps

1. Kill power at the breaker before inspecting wiring or components.
2. Look through the oven bottom access (if equipped) for an igniter that is cracked, chalky, or not glowing consistently.
3. Check for loose or heat-damaged wire connections at the igniter and harness.
4. If you have a meter, test continuity on the igniter circuit and inspect for broken wires.
5. Re-test operation after restoring power.

Why it matters

A weak igniter can keep the oven from lighting even though you hear clicking; the igniter must reach the right temperature/current draw to open the gas valve and light the burner reliably.

For control locations, lighting behavior, and safety notes specific to model 79075403502, follow the 79075403502 owner’s manual.

Last updated: February 2026

Kenmore Elite model 79075403502 does not use a single, dedicated “reset” button. When the control seems stuck (for example after a power flicker or a canceled cycle), we reset it by canceling the current function on the keypad and then power-cycling the range to reboot the electronic control.

How to reset (safe, basic steps)

• Press STOP/CLEAR to cancel any active oven function.
• Turn OFF the oven function you were using (Bake, Broil, Timer, Self-clean).
• If the display is still unresponsive, switch the range OFF at the breaker (or unplug if accessible).
• Leave power off for 2 to 5 minutes, then restore power.
• Reset the clock and try a simple Bake test.

For the exact control pad layout and feature behavior on this model, use the 79075403502 owner's manual.

What “reset” means on this range

On 79075403502, “resetting” usually means one of these actions:

Situation	What to do	What it fixes
Wrong mode selected or timer running	Press STOP/CLEAR	Cancels the current command
Control panel frozen after outage	Power-cycle 2 to 5 minutes	Reboots the control board
Door locked after self-clean	Wait for cool-down; then STOP/CLEAR	Allows lock to release after normal cool-down
Oven temperature seems off	Use the oven temp adjustment feature	Corrects consistent over/under heating

If the oven still will not heat after a reset

These checks narrow down whether the issue is ignition, sensing, or control:

• Confirm the gas supply is on and other burners light normally.
• Start Bake and listen for the igniter sequence (you should typically hear/see ignition activity within a minute).
• If the oven will not ignite, a common repair is replacing the range bake igniter 5303935066.
• If temperatures are erratic, the range oven temperature sensor 5304504897 is a common suspect.
• If the display works but functions do not respond correctly, the electronic control can be involved.

Why it matters

A “reset” clears a stuck command and reboots the electronic control, but it does not correct a failed part (like an igniter, temperature sensor, or gas valve). Using the right reset method helps you avoid unnecessary parts replacement and gets you to the real cause faster.

Last updated: February 2026

On the Kenmore Elite gas range model 79075403502, the model and serial number are printed on the serial plate located on the oven front frame behind the storage drawer. Pull the drawer out and look along the front frame area for the label; it lists both numbers.

Where to look on model 79075403502

Check these spots in this order:

• Behind the bottom storage drawer on the oven front frame (primary location)
• On the right side of the drawer body (same serial plate area)
• On the serial plate label itself for the full model number, serial number, and other ratings

For a diagram and wording that matches this range, use the 79075403502 owner's manual.

Quick steps to find it fast

1. Make sure all controls are in OFF and the oven is cool.
2. Pull the bottom drawer straight out (remove it if needed for better access).
3. Look for a rectangular serial plate on the front frame behind the drawer.
4. Write down:

• Model number (example format: 790.########)
• Serial number
• Any lot number or letter shown

What the serial plate tells you (and why it matters)

The serial plate is more than a model tag; it helps us match the correct Kenmore parts and gas settings.

Label item	Why you need it
Model number	Ensures parts fit your exact range configuration
Serial number	Helps confirm production details for compatible replacements
Burner ratings and fuel info	Confirms the range’s gas type and factory pressure setup

When you will need the model number

Have the model number ready when you:

• Order replacement parts like a range bake igniter 5303935066
• Look up installation details in the 79075403502 installation guide
• Troubleshoot heating issues, ignition problems, or oven temperature concerns

Last updated: February 2026

If your Kenmore Elite gas range 79075403502 oven is not working, the most common causes are a power supply problem, a control fault (F-code), or an ignition/heating issue in the bake system. Start with the quick checks below, then move to bake ignition and sensor diagnostics using the 79075403502 owner's manual.

Quick checks we recommend first

• Confirm the range cord/plug is fully seated in the outlet (the oven needs electricity even though it uses gas).
• Check for a home power outage; the manual notes the oven should not be operated during a power failure.
• If the control is beeping and showing an F code, press STOP/CLEAR to stop the beeping and clear the display.
• Make sure you are setting a normal BAKE cycle correctly (not delayed start or a locked-out mode).
• If surface burners will light but the oven will not heat, focus on the oven bake ignition system.

Most common oven-heat failure on gas ranges: weak bake igniter

On this model, a weak oven igniter can glow but still fail to pull enough current to open the gas valve, so the burner never lights or takes a long time to light.

What you typically see

Symptom	What it usually points to
No heat, no ignition sound	Power/control issue, wiring, or failed igniter
Slow preheat, intermittent heat	Weak igniter (most common)
Heats but temperature is inaccurate	Temperature sensor or calibration

If these symptoms match, replacing the range bake igniter 5303935066 is a common fix.

If it heats but bakes poorly (temperature issues)

The manual calls out that many factors affect baking results and also includes oven temperature adjustment. If the oven is consistently too hot or too cool, check the sensor and calibration.

• Verify you are preheating fully.
• Use the correct rack position and allow air circulation.
• If temperature is consistently off, test/replace the range oven temperature sensor 5304504897.

Why it matters

A gas oven depends on both gas flow and electrical control/ignition. Fixing the power or igniter issue restores safe, reliable burner ignition and prevents long preheat times and uneven baking.

Last updated: February 2026