Samsung RF28K9380SR/AA-00 refrigerator Parts

A bottom-mount refrigerator like the Samsung RF28K9380SR puts fresh food at eye level and typically offers more flexible organization, while a top-mount usually costs less and can be slightly more energy-efficient. The better choice depends on whether daily convenience or upfront cost and simplicity matter most.

• Choose bottom mount if you use the refrigerator section far more than the freezer and want easier access to produce, deli items, and drinks.
• Choose top mount if you want a simpler layout, a lower purchase price, and you do not mind bending for fresh-food items.
• If you meal prep or buy lots of fresh groceries, bottom-mount layouts usually feel more efficient day to day.
• If you store lots of frozen foods and want them at chest height, a top mount can be more comfortable.
• If you are comparing two specific models, check the exact capacity, shelf adjustability, and energy label details in the RF28K9380SR owner's manual.

The refrigerator section is the area most households open the most. Bottom-mount designs prioritize that daily-use space, while top-mount designs prioritize lower cost and straightforward storage. Picking the layout that matches your habits helps reduce food waste and makes temperature management easier.

If your decision is driven by recurring ice or cooling issues (rather than layout), start with common causes like airflow restrictions, dirty condenser area, or ice maker problems. For Samsung-specific ice maker symptoms, use why your Samsung fridge stopped making ice and how to fix it to narrow down the likely fix.

Last updated: February 2026

For the Samsung RF28K9380SR refrigerator, the correct water filter is identified by the filter part number used for your exact version and housing. The fastest way to confirm the exact filter part number is to match what is printed on your current filter or verify it in the RF28K9380SR owner's manual.

• Remove the filter and read the part number printed on the label (use a flashlight if needed).
• If the label is worn, take a photo and zoom in to read the characters.
• Check the filter head or housing label inside the refrigerator compartment.
• Compare the shape and locking style (twist-in vs push-in) to avoid ordering the wrong style.
• If water flow is weak, replace the filter first before troubleshooting the valve or dispenser.

This RF28K9380SR parts list includes the filter housing assembly, which is the component the filter locks into. If the housing is cracked, leaking, or will not hold the filter securely, replacing the housing can restore a proper seal.

• Related part for fit and sealing: refrigerator water filter housing assembly DA97-16166B

Using the exact water filter part number for your Samsung refrigerator helps maintain proper water flow, prevents leaks at the filter housing, and reduces strain on the water inlet valve and dispenser system.

Last updated: February 2026

In a refrigerator like the Samsung RF28K9380SR, the most commonly replaced parts are the ones that handle airflow, temperature sensing, water supply, and ice making. These parts wear from normal use, mineral buildup, and door-opening cycles, while sealed-system parts (like the compressor) are replaced less often.

• Water filter and water filter housing (leaks, low flow, filter won’t seat)
• Door gaskets (warm spots, moisture, frost, high energy use)
• Evaporator fan motor (warm fridge, noisy fan, weak airflow)
• Condenser fan motor or condenser fan assembly (overheating, poor cooling, loud buzzing)
• Temperature sensor/thermistor (temps swing, error codes, short cycling)
• Water inlet valve (no ice, no water, slow fill, valve seep/leak)
• Ice maker components (no ice, clumping, freezing in the ice room)

These are model-matched examples we often see replaced when symptoms point to them:

• Check for obvious causes first: doors sealing, vents blocked by food, dirty condenser area
• Listen for fan operation: evaporator fan (inside) vs condenser fan (rear/bottom)
• Look for water symptoms: slow fill, no fill, dripping at the valve or filter area
• Note when the problem happens: after defrost, after door openings, after filter change
• Use the diagnostic and component access steps in the RF28K9380SR owner's manual

Replacing the correct “high-wear” part first (fan motor, sensor, inlet valve, ice maker components) usually restores cooling and ice performance faster and avoids unnecessary sealed-system work. It also helps prevent repeat issues like frost buildup, leaks, and temperature swings.

Last updated: February 2026

The most common problems we see on Samsung refrigerators like model RF28K9380SR are cooling complaints (warm fridge or freezer), ice maker issues (no ice, clumping, freezing up), and water leaks. These symptoms usually trace back to airflow restrictions from frost buildup, fan problems, or water supply and filtration issues; confirm your model’s specific checks in the RF28K9380SR manual.

• Fridge warm, freezer OK (or vice versa): evaporator fan not moving air, vents blocked by frost, or a sensor reading wrong.
• No ice or slow ice: ice maker compartment freezing up, low water flow, or a valve not opening fully.
• Water under the fridge or in crisper area: clogged defrost drain, loose water line, or a leaking valve.
• Loud buzzing or grinding: fan blade hitting ice, failing fan motor, or ice buildup around the fan shroud.
• Temps swing up and down: temperature sensor drift, door not sealing, or heavy frost on the evaporator cover.

1. Verify the set temperatures and give the unit 24 hours to stabilize after changes.
2. Check door gaskets for gaps and make sure drawers and bins are not preventing a full seal.
3. Look for frost or ice buildup on the rear interior panel; heavy frost often means a defrost or airflow problem.
4. If ice production is poor, confirm household water pressure is adequate and the supply line is not kinked.
5. If you see leaking, inspect the water line connections and look for a blocked defrost drain path.

Cooling and ice maker problems often start small (a little frost, a slightly noisy fan, slower ice) and then snowball into food spoilage, repeated ice jams, and higher run time. Catching airflow, sensor, and water-supply issues early helps protect the compressor and keeps temperatures stable.

Last updated: February 2026