Kenmore Elite 25328092802 freezer Parts

For Kenmore Elite model 25328092802, the most reliable “reset” is a power reset: unplug the freezer for a few minutes, then plug it back in and allow time for temperatures to stabilize. If the control panel is locked, unlock it using the Alarm Reset button.

• Press the temperature DOWN button until the display shows “0” (OFF).
• Unplug the freezer (grip the plug, do not pull the cord).
• Wait 5 minutes.
• Plug the freezer back in.
• Press the temperature UP button until the display shows “4” or your desired setting.
• Allow several hours for the temperature to stabilize after any adjustment.

For control locations, button names, and feature differences, use the 25328092802 owner's manual.

This model can lock the temperature control to prevent accidental changes.

• Press and hold Alarm Reset for 3 seconds to lock or unlock.
• When locked, a “1” appears on the display.
• When unlocking, you may briefly see a “U”, then the current temperature display returns.

A reset helps clear temporary control glitches and restores normal operation after a power interruption. It does not correct a failed part.

A proper reset gets the electronic temperature control back to a known state and prevents unnecessary part replacement. If the door seal leaks or the freezer is heavily frosted, the unit can run longer and struggle to hold temperature even after a reset.

Last updated: February 2026

A Kenmore Elite refrigerator typically lasts 10 to 15 years. With steady maintenance (cleaning coils, keeping door seals tight, and avoiding warm-air leaks), many units reach the upper end of that range. For care and operating tips, follow the 25328092802 owner's manual.

• 10 to 15 years: common for modern refrigerators and freezers
• 12+ years: typical when temperatures stay stable and airflow is good
• 15+ years: more likely with clean condenser areas and good door sealing
• Shorter lifespan: common with frequent power issues, poor ventilation, or heavy frost buildup

• Keep the condenser area clean and unobstructed so the compressor runs cooler.
• Confirm the door closes squarely and the gasket seals all the way around.
• Defrost correctly; the manual notes to unplug the unit before defrosting.
• Avoid extension cords; the manual warns against using extension cords or adapter plugs.
• Listen for normal operating sounds; the manual explains that modern units can sound louder during compressor cycles.

A refrigerator or upright freezer that runs hotter or longer than normal puts extra load on the sealed refrigeration system (compressor, refrigerant tubing). Reducing run time through airflow and sealing helps protect the most expensive components.

Last updated: February 2026

Your Kenmore Elite model 25328092802 is an upright freezer (not a refrigerator). The exact cubic-foot capacity is listed in the specifications for this model and on the freezer’s rating label; use the 25328092802 use and care guide to confirm the correct capacity for your unit.

Use the model documentation first, then verify on the appliance label.

• Check the specifications/features section in the 25328092802 use and care guide.
• Look for the model and serial number plate inside the cabinet; on upright freezers it is commonly on a side wall (often the right side) or the back wall.
• The label may list capacity, total volume, or cu ft.
• If the label only shows electrical data (volts/amps), rely on the manual’s specifications.
• Avoid decoding cubic feet from the model number; Kenmore numbering is not a consistent capacity code.

The manual includes a practical loading rule that uses cubic feet.

Knowing the true cubic-foot capacity helps you plan how much fresh food you can freeze at once, organize shelves and door bins for airflow, and avoid overloading that can increase run time and temperature swings.

Last updated: February 2026

For Kenmore Elite model 25328092802, the model and serial number plate is typically on the upper left wall inside the freezer compartment on upright models. Use the exact model number from that plate when ordering parts or checking specifications in the 25328092802 owner's manual.

Check these common locations on Kenmore upright freezers:

• Upper left interior wall inside the freezer (most common for upright models)
• Along the inside cabinet wall near the door opening
• On a label that also lists the serial number and purchase date area
• If you have a chest freezer instead, the label is often on the left exterior wall

Record the information exactly as shown on the plate:

• Model number (example format in the manual: 253. or 970.)
• Serial number
• Purchase date (helpful for service and warranty timing)

Kenmore Elite appliances can look similar across model series, but parts like a freezer door gasket, electronic control board, or defrost heater must match the exact model number to fit and function correctly.

Last updated: February 2026

If our Kenmore Elite upright freezer model 25328092802 is running but not freezing, the most common causes are an incorrect temperature control setting, a door that is not sealing, or restricted airflow from dirty condenser areas or frost buildup. We use the troubleshooting steps in the 25328092802 owner's manual to pinpoint the failure quickly.

• Confirm the temperature control is not set to OFF (OFF stops the compressor but does not fully disconnect power).
• Make sure the freezer is plugged in firmly and the outlet and breaker are OK.
• Limit door openings; frequent openings can keep temperatures from recovering.
• Check that the door closes squarely; leveling affects sealing and cooling.
• Look for heavy frost on the back interior panel (often points to a defrost problem).
• Allow time after loading warm food; large loads can temporarily raise temps.

A leaking door gasket lets warm, moist air in, which reduces freezing and can create frost.

• Inspect for gaps, rips, or hardened sections
• Clean the gasket and mating surface
• If the gasket is damaged, replace the freezer door gasket 5304507199

Your freezer has to move heat out of the cabinet. If airflow around the unit is blocked, cooling performance drops.

• Verify there is space for air circulation around the cabinet
• Clean dust from the condenser area (where accessible)
• Keep the freezer level so the door seals properly

If the evaporator area is packed with frost, cold air cannot circulate.

When a freezer is not freezing, food safety and compressor run time are the big concerns. Fixing door sealing, leveling, and airflow issues early prevents excessive run time and helps the sealed refrigeration system maintain stable temperatures.

Last updated: February 2026