Kenmore 10651762511 refrigerator Parts

Your Kenmore side-by-side refrigerator model 10651762511 is a 25.6 cubic foot refrigerator (total capacity). Use the 10651762511 owner's manual to confirm where the model and serial label is located and to review features that affect usable storage space.

Total cubic feet is the combined interior volume of the fresh food and freezer sections. Usable space can feel different based on shelving, bins, and the ice maker.

• Total capacity: overall interior volume (fresh food + freezer)
• Usable space: reduced by shelves, drawers, and the ice bin
• Ice maker on: typically reduces freezer storage compared to no ice maker
• Door bins: add convenience but do not change the rated cubic feet

Knowing the capacity helps when planning kitchen fit, grocery storage, and maintenance routines (water and air filtration, ice production). For example, staying on schedule with a Kenmore refrigerator water filter 9081 helps protect the dispenser and ice maker water quality.

We list model-matched parts for 10651762511 on the parts list for this refrigerator; for additional model lookups and ordering, use Sears PartsDirect.

Last updated: February 2026

For Kenmore side-by-side refrigerator model 10651762511, the exact overall dimensions (height, width, depth) are listed in the product specifications section of the 10651762511 owner's manual. Use those measurements for cabinet planning, and remember to add the required clearance space for ventilation and door swing.

When you confirm dimensions for installation, we recommend checking these points so your cutout and doors work correctly:

• Measure width at the widest point (often the door handles).
• Measure height from floor to top hinge cover (include leveling legs if extended).
• Measure depth in two ways: cabinet-only and with doors/handles.
• Confirm you have room for the doors to open fully next to a wall.
• Add space for the water line if you have an ice maker.

Your manual calls out these typical clearances for proper airflow and usability:

• 1/2 inch on each side and at the top
• 1 inch behind the refrigerator
• 2 inches minimum on each side next to a fixed wall (varies by setup) to allow door swing

Correct dimensions and clearances prevent poor cooling (restricted airflow), doors that cannot open fully, and pinched water lines that can cause dispenser or ice maker problems.

If you need replacement parts while you measure or install, you can order model-specific parts from the list for 10651762511, or search by model on Sears PartsDirect.

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life; with consistent maintenance and timely repairs, many units reach the upper end of that range. For your Kenmore 10651762511 side-by-side refrigerator, following the care and maintenance guidance in the owner's manual helps maximize lifespan.

In normal household use, refrigerator longevity usually falls into these buckets:

• 10 to 15 years: typical for most modern refrigerators
• 15+ years: common when coils are kept clean and door seals stay tight
• Shorter lifespan: more likely with poor airflow around the cabinet, dirty condenser coils, or recurring ice and water system leaks

These actions prevent the most common wear issues (cooling strain, moisture leaks, and airflow problems):

• Clean condenser coils regularly (dust buildup makes the compressor work harder)
• Keep door gaskets clean and sealing; fix gaps that cause warm air intrusion
• Replace the water filter on schedule to protect the dispenser and ice maker (use Kenmore refrigerator water filter 9081)
• Replace the air filter when odors linger or airflow seems reduced (use refrigerator air filter W10311524)
• Maintain proper temperatures (typically 37°F fresh food, 0°F freezer)
• Avoid overpacking; blocked vents reduce airflow and cause temperature swings

A refrigerator usually fails early from heat and airflow stress (dirty coils, restricted ventilation) or water system problems (clogged filters, valve seepage). Preventive care reduces compressor run time, stabilizes temperatures, and helps your Kenmore 10651762511 run longer.

Use this simple decision guide:

• Repair makes sense when the issue is isolated (filter, door switch, ice maker, inlet valve)
• Replacement becomes more likely when cooling performance is inconsistent and major sealed-system repairs are needed
• If you are maintaining the ice and water system, our guide on how to prevent water dispenser and ice maker problems helps reduce repeat failures

You can order model-matched replacement parts from the parts list for Kenmore 10651762511, or search by model on Sears PartsDirect.

Last updated: February 2026

On a Kenmore side-by-side refrigerator like model 10651762511, the model number is printed on the appliance identification label (the same label that lists the serial number). You will typically find this label inside the fresh food compartment along the side wall or near the ceiling area; confirm the exact spot in the 10651762511 owner's manual.

• Open the refrigerator (fresh food) door and check the left and right interior side walls.
• Look near the top liner area (upper interior wall/ceiling edge).
• Check around the crisper drawer frame area.
• If you do not see it in the refrigerator section, check the freezer compartment side wall.
• Use a flashlight; the label is often small and can blend into the liner.

The ID label usually includes:

• Model number (for example, 10651762511)
• Serial number (a longer code used to identify the production unit)
• Electrical ratings (volts/amps) and other manufacturing information

We use the model number to match the correct Kenmore parts for your exact configuration, such as the Kenmore refrigerator water filter 9081, refrigerator air filter W10311524, or refrigerator ice maker W10873791. If the model number is off by even one digit, you can end up with the wrong door bin, control, or valve.

Last updated: February 2026