Kenmore 10652572202 refrigerator Parts

Kenmore model numbers tell us who built the refrigerator and which design family it uses. For Kenmore refrigerator model 10652572202, the 106 prefix identifies the manufacturer family, and the remaining digits narrow down the exact configuration so we can match the correct parts and service information.

Where to find the model number on this refrigerator

On Kenmore side-by-side refrigerators like 10652572202, the model and serial label is typically on the inside wall of the fresh food (refrigerator) compartment.

Check these common spots:

• Inside the refrigerator compartment on a side wall
• Near the crisper area or lower liner wall
• Around the door opening (hinge side)
• On a sticker that also lists the serial number

For label location details and recording the full number, use the 10652572202 owner's manual.

How to interpret the number (what each section means)

Kenmore model numbers are usually read in sections. The most important part for parts lookup is the prefix.

• Prefix (first 3 digits): manufacturer family (example: 106)
• Middle digits: design series and feature set
• Last digits: production variation (color, revision, supplier changes)

Quick example

Example model	What it tells us	Why it matters
10652572202	Kenmore refrigerator with 106 prefix	Helps us match the correct diagrams and parts
106.52572202 (with a dot)	Same model, different formatting	The dot does not change the model identity

Why it matters for ordering parts

Using the full model number prevents wrong-part issues, especially for common repairs involving the ice maker, water system, and temperature control.

When you shop or troubleshoot, match:

• The full model number: 10652572202
• The exact part ID and description (example: refrigerator inlet valve W10408179)
• The symptom and location (ice maker, dispenser, freezer, fresh food section)

Why it matters

Kenmore used multiple manufacturers across different product lines. The model prefix and full number are the fastest way for us to identify the correct parts list, wiring layout, and service procedures for your exact refrigerator.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; the exact cabinet width for model 10652572202 is listed in the 10652572202 owner's manual and the 10652572202 installation guide. Plan for extra clearance on both sides so the doors can swing fully.

Typical width and what to plan for

For a Kenmore side-by-side refrigerator like 10652572202, we recommend planning around these common measurements:

• Cabinet width (typical): 32 to 36 in.
• Door swing clearance: leave room so doors open without hitting walls
• Ventilation clearance: allow 1/2 in. on each side and at the top
• Wall-side clearance for door swing: allow 2 in. minimum when next to a fixed wall (varies by model)
• Back clearance: allow extra space if you have an ice maker water line

Quick planning table

Use this as a practical starting point, then confirm the exact width in the manual.

What you are measuring	What to use for planning	Why it is different
Cabinet width	32 to 36 in. typical	Varies by series and capacity
Space needed in the opening	Cabinet width + clearances	Allows airflow and door swing
Clearance next to a wall	2 in. minimum (model-dependent)	Prevents door binding and dents

How to measure width the right way

• Measure the cabinet (main box) at the widest point.
• If you are fitting into a cutout, measure the opening width in 3 places (top, middle, bottom).
• If the refrigerator sits next to a wall, confirm you have enough room for door swing.
• Include any trim, baseboards, or protruding hinges that can affect fit.

Why it matters

Width is only part of fit. Door swing clearance and ventilation space help prevent poor cooling performance, noisy operation, and doors that do not open fully.

Last updated: February 2026

Your Kenmore refrigerator model 10652572202 has an approximate total capacity of 21.9 cubic feet. Use the 10652572202 owner's manual to confirm the exact listed capacity for your specific configuration and features.

Quick capacity details

Here is the capacity information most customers need when comparing models or planning storage:

• Total capacity: 21.9 cu. ft.
• Capacity is typically listed as total volume (fresh food plus freezer)
• Usable space can feel lower if shelves, bins, or the ice system take up room
• Door bins and the ice bin reduce open shelf space even though they are included in total volume

Measurement	What it means	What you can use it for
Total capacity (cu. ft.)	Combined refrigerator + freezer volume	Comparing model size, shopping for replacements
Usable space	Space you can practically load with food	Meal prep, bulk storage planning

Why your “usable space” may feel different

Even with a 21.9 cu. ft. rating, storage can vary based on how your side-by-side is set up.

Common reasons it feels smaller:

• Ice maker and bucket take freezer shelf volume
• Adjustable shelves may be positioned inefficiently
• Crisper and meat pans reduce tall-item space
• Airflow channels must stay open for even cooling

Related parts that affect storage and performance

If broken bins or drawers are limiting space, replacing them restores usable storage quickly:

• Refrigerator crisper pan WP2188656 (fresh food drawer storage)
• Refrigerator meat pan WP2188664 (deli/meat drawer storage)
• Refrigerator ice bin WPW10670845 (freezer ice storage)

Why it matters

Knowing the cubic feet helps when you are matching a replacement refrigerator, estimating food storage, or deciding whether issues like poor cooling are related to overpacking and blocked airflow.

Last updated: February 2026

For the Kenmore 10652572202 side-by-side refrigerator, we recommend setting the freezer to 0°F (-18°C) for normal household use; that temperature keeps ice cream firm and supports steady ice production. Start at the factory mid-setting, then make small adjustments and recheck after 24 hours using the guidance in the 10652572202 owner's manual.

Recommended settings and what to expect

• Freezer: 0°F (-18°C) for everyday use
• Colder than 0°F can help with long-term storage, but it will not cool faster
• Warmer than 0°F can lead to soft ice cream and slow ice maker output
• If temps seem off, check that air vents are not blocked before changing controls
• Make one control change at a time, then wait at least 24 hours before adjusting again

How to adjust the freezer control on this model

Your refrigerator uses rotary-style controls on some versions, and they are typically preset to a mid-setting from the factory.

1. Confirm the controls are at the mid-setting.
2. If the freezer is too warm, move the FREEZER control one setting higher (colder).
3. If the freezer is too cold, move the FREEZER control one setting lower (less cold).
4. Wait 24 hours, then recheck the temperature.

Quick adjustment guide

Symptom	Likely cause	What we do next
Freezer too warm, soft ice cream	Door opened often, warm room, heavy use	Move freezer control 1 step colder
Freezer too cold, items freezing hard	Setting too cold for conditions	Move freezer control 1 step warmer
Not enough ice	Freezer not cold enough or new install	Set to 0°F, wait 24 to 72 hours

Why it matters

Freezer temperature directly affects food safety, texture (especially ice cream), and ice maker performance. This model’s manual notes that after installation or hook-up, cooling and ice production take time; the ice maker can take up to 72 hours to reach full production.

Last updated: February 2026

Most Kenmore refrigerators last 10 to 15 years. For a Kenmore side-by-side like model 10652572202, regular care (cleaning, good door sealing, and fixing cooling or ice maker issues early) is what most often determines whether you land closer to 10 years or push beyond 15.

Typical lifespan ranges (what to expect)

Kenmore refrigerator life varies by usage and maintenance, but these ranges are reliable for planning repairs.

• Average: 10 to 15 years
• Often achievable with good maintenance: 15 to 20 years
• Shortened lifespan causes: dirty condenser coils, poor airflow, worn door gaskets, repeated overheating of the compressor

Condition	What you’ll usually see	Likely outcome
Well maintained	Stable temps, normal run times	Longer service life
Poor maintenance	Warm temps, long run times, noisy operation	Earlier major repairs
Door seal problems	Frost, sweating, temp swings	Higher wear on sealed system

Maintenance that extends life the most

We recommend focusing on the items that reduce compressor run time and prevent moisture problems.

• Clean condenser coils and keep airflow clear around the cabinet
• Keep door gaskets clean so doors seal without sticking (the manual calls out cleaning sticky gaskets)
• Set temperatures correctly and avoid overpacking air vents
• Replace failed ice and water parts quickly to prevent leaks and icing
• Use the care schedule in the 10652572202 owner's manual

Repair vs. replace: a practical rule

A refrigerator is usually worth repairing when the fix is a common wear item (ice maker, water valve, thermostat, door cam). If the sealed system or compressor is failing, the repair cost often drives the decision.

• Common, repairable items: ice maker, inlet valve, thermostat, door hardware
• Higher-cost items: evaporator, compressor, sealed system components

Why it matters

A side-by-side refrigerator that runs warmer than normal or runs constantly can wear out the compressor faster. Simple upkeep and quick repairs help your Kenmore 10652572202 maintain stable temperatures and avoid expensive breakdowns.

Last updated: February 2026