Kenmore 25329711990 upright freezer Parts

We size the Kenmore upright freezer model 25329711990 by its usable storage volume (cubic feet). The most reliable way to confirm the exact cubic-foot capacity for your specific unit is to match the model and serial information and then reference the specifications section in the 25329711990 owner's manual.

How to confirm the exact capacity for your freezer

Capacity can vary a lot across Kenmore 253-series upright freezers, so we recommend verifying it using the model and serial plate and the specs listed for that exact model.

• Locate the model and serial number plate (typically on the upper left wall inside the cabinet on upright models)
• Confirm the model number is 25329711990 (character-for-character)
• Check the specifications or features section in the manual for “capacity” or “cu. ft.”
• If you are comparing listings online, ignore capacities shown for different model numbers
• Use the freezer’s “fresh food loading” guidance as a practical cross-check for how much it can freeze at once

Quick reference: what the manual does tell us (and how it helps)

The manual includes a freezing guideline that uses “per cubic foot,” which is useful once you confirm your freezer’s capacity.

Item	What we use it for	What to do with it
“Freeze only 3 pounds of fresh food per cubic foot” guidance	Planning how much unfrozen food to load at one time	Multiply your freezer’s cu. ft. by 3 to estimate a safe single-load amount
4-hour cool-down period	Preventing warm loads from raising cabinet temps	Let the freezer run 4 hours before loading unfrozen food
Temperature control setting guidance	Stabilizing temps after changes	Adjust one number at a time and wait several hours

Why it matters

Knowing the correct cubic-foot capacity helps us load food safely (so it freezes properly), plan bulk storage, and avoid overloading the freezer during initial cool-down or after a power failure.

Last updated: January 2026

On the Kenmore upright freezer model 25329711990, the model and serial number plate is typically located on the upper left wall inside the freezer compartment. Use the location diagram and wording in the 25329711990 owner's manual to match what you see inside your cabinet.

Common places to check on an upright freezer

We recommend checking these spots in order:

• Upper left interior wall (most common for upright models)
• Side wall inside the cabinet near the front opening
• Ceiling area inside the freezer (some designs place the label higher)
• Behind the lower kick plate or base grille (if your model has one)
• Rear exterior panel (less common, but possible)

What the label looks like and what to write down

The plate lists two key identifiers. Record both before ordering parts.

Item on the plate	What it’s used for
Model number (example: 25329711990)	Ensures parts diagrams and replacement parts match your exact freezer
Serial number	Helps confirm production details when troubleshooting or getting service

Tips if you still do not see it

These steps help you find the plate quickly without damaging the liner:

• Use a flashlight and look along the upper left interior wall seams
• Remove food packages and baskets that block the left wall
• Wipe light frost or condensation off the wall so the print is readable
• Avoid scraping with metal tools; use a soft cloth if you need to clear frost

Why it matters

Kenmore model numbers can look similar across different upright freezers, but parts like a door gasket, temperature control components, and interior shelving can vary by model. Using the exact model number prevents wrong-part returns and fit issues.

Last updated: January 2026

Most Kenmore upright freezers, including model 25329711990, do not have a dedicated “reset” button. If you need to recover from a warm-temp alarm or odd operation, we reset it by correcting the cause (power, door seal, airflow) and then letting the freezer run continuously through a full cool-down period as described in the 25329711990 owner's manual.

What you can reset on this model

On many upright freezers, the only “reset-like” actions are tied to alarms and power.

• Temp alarm buzzer: press the Temp Alarm OFF button to silence the buzzer (the light behavior indicates whether temps are normal or warm).
• Power interruption recovery: restore power, keep the door closed, and allow the freezer to pull back down to temperature.
• Temperature setting: adjust the temperature control knob one number at a time and wait several hours between changes.

Step-by-step: safe reset after a warm alarm or power outage

1. Confirm the freezer has power (interior light and/or power-on indicator behavior).
2. Make sure the door is fully closed and not blocked by packages.
3. Set the temperature control to the normal operating setting (often factory preset around “4”).
4. Keep the door closed and allow at least 4 hours for a complete cool-down.
5. If the alarm is sounding, silence it using the Temp Alarm OFF button, then monitor temperatures.

Quick checks that fix most “needs a reset” complaints

• Door not sealing (gasket torn, warped, or dirty)
• Heavy frost buildup restricting airflow
• Freezer overfilled with unfrozen food (freeze in smaller batches)
• Temperature control changed too quickly (no stabilization time)
• Room temperature too warm or poor ventilation around the cabinet

Parts that commonly relate to “won’t stay cold” symptoms

Symptom	Common cause	Example part for this model
Frost, moisture, warm temps	Air leak at door	Freezer door gasket 5304507200
Clicking, compressor won’t start	Start device issue	Freezer compressor start relay 216594300

Why it matters

A “reset” usually masks the real issue. On the 25329711990 upright freezer, stable temperature depends on a good door seal, correct loading, and giving the system time to cool down and stabilize after any change.

Last updated: January 2026