Kenmore Elite 79575196401 refrigerator Parts

Kenmore Elite was introduced as Sears’ premium Kenmore line in 1999. Your specific Kenmore Elite refrigerator model 79575196401 can be newer than that; the most accurate way to date your exact unit is by decoding the serial number using the 79575196401 owner's manual.

How to find the manufacture date on your refrigerator

We use the serial number (not the model number) to pinpoint the build date.

• Look for the model and serial tag inside the fresh food compartment (often on a side wall near the crisper area).
• If you do not see it inside, check the cabinet edge behind the doors or the rear exterior panel.
• Write down the full serial number exactly as shown.
• Use the serial format guidance in the manual to interpret the date code.
• If the label is damaged, take a clear photo and compare each character carefully.

What “Kenmore Elite” means versus your model number

“Kenmore Elite” is a product line name; it does not identify a single release year. Model 79575196401 identifies a specific bottom-mount refrigerator design, while the serial number identifies when your unit was built.

Term	What it tells you	What it does not tell you
Kenmore Elite	Premium product line	Exact age of your refrigerator
Model number (79575196401)	Design family and parts compatibility	Exact build date
Serial number	Manufacture date code	Parts list by itself

Why it matters

Knowing the manufacture date helps us match the correct replacement parts (like a door switch, water inlet valve, or compressor components) and confirm which version of a part your refrigerator uses over its production run.

Last updated: January 2026

Most Kenmore Elite refrigerators, including model 79575196401, typically last 10 to 15 years with normal household use. Regular upkeep (especially cleaning condenser coils and keeping door gaskets sealing) is what most often determines whether you land closer to 10 years or closer to 15.

Typical lifespan and what to expect

Here is a practical way to think about service life for a bottom-mount refrigerator like this one:

Age of refrigerator	What’s common	What we recommend
0 to 5 years	Minor adjustments, occasional ice or water issues	Keep coils clean; confirm temps are stable
6 to 10 years	Wear items show up (fans, valves, switches)	Fix small issues early to reduce strain
10 to 15 years	Higher chance of sealed-system or cooling failures	Compare repair cost vs. replacement value

Maintenance that extends lifespan

The Kenmore manual for this model calls out routine care items like condenser coils and door liner and gaskets; we recommend these habits:

• Clean the condenser coils regularly to help the compressor run cooler and longer.
• Keep door gaskets clean and pliable so the doors seal tightly.
• Avoid overpacking; good airflow helps the evaporator fan and cooling system.
• Set controls to stable, food-safe temperatures and avoid frequent big changes.
• After power interruptions, give temperatures time to recover before adjusting settings.

For model-specific care and cleaning guidance, use the 79575196401 owner’s manual.

When a “lifespan” problem is really a repairable part

If cooling is uneven, temperatures swing, or you hear new fan noises, a repair may restore normal operation without replacing the refrigerator. Common service areas on bottom-mount units include:

• Evaporator airflow (fan blade issues) such as the refrigerator evaporator fan blade 5901JA1021A
• Defrost system problems (frost buildup restricting airflow)
• Water system leaks or slow dispensing (tubing, fittings, inlet valve)

Why it matters

A refrigerator that is struggling to move air or reject heat runs longer cycles; that increases wear on major components like the compressor and can shorten overall life. Simple maintenance often prevents the “it’s dying” symptoms customers notice first.

Last updated: January 2026

Kenmore Elite refrigerators are sold under the Kenmore brand; the actual manufacturer varies by model line and production run. For the Kenmore Elite model 79575196401, the 795 model prefix is commonly associated with LG-built Kenmore refrigerators, and many replacement parts for this model are LG-sourced.

How to tell who made your specific Kenmore Elite

The most reliable way is to match the model number and the identification label information.

• Use the full model number 79575196401 (not just “Kenmore Elite”) when shopping parts
• Check the identification label inside the fresh food compartment (typically on the right-hand side)
• Compare the model prefix (for example, 795) and the parts used on the unit
• Use the wiring diagram and parts views in the 79575196401 owner’s manual

What “Kenmore Elite” means

“Kenmore Elite” is a Kenmore product tier (features and finish level), not a single factory or manufacturer. Different Kenmore Elite refrigerators can be produced by different manufacturers depending on the model series.

Quick reference by what you see

What you have	What it usually indicates	What to do next
Model starts with 795	Often LG-built Kenmore refrigerator	Confirm with the ID label and parts list
Model starts with other prefixes	May be built by a different manufacturer	Use the exact model number to match parts

Why it matters for parts and troubleshooting

Manufacturer differences affect part fit, wiring connectors, and service procedures. Using the exact model number helps you get the correct items the first time.

• Water system parts can differ (tubing, fittings, valves)
• Door hardware and switches can be model-specific
• Cooling system components and diagnostics vary by design

If you are diagnosing a display or cooling issue, we also recommend checking Kenmore 795 model bottom freezer refrigerator error codes for common code meanings and next steps.

Last updated: January 2026

Common problems on the Kenmore Elite 79575196401 bottom-mount refrigerator are weak or no cooling, doors not sealing or closing fully, frost buildup, and unusual noises. Most fixes start with control settings, door alignment, and cleaning the condenser coils; then move to fan, defrost, or sealed-system checks.

Most common symptoms and what they usually mean

• Not cooling or warm temperatures: controls set wrong, doors not fully shut, dirty condenser coils, airflow blocked, or a fan issue.
• Frost or ice buildup: door left open, gasket not sealing, or a defrost system problem.
• Doors hard to open: normal vacuum effect after closing, or sticky/dirty gaskets.
• Doors will not close completely: refrigerator not level, bins/shelves out of position, food packages blocking, or gaskets sticking.
• Buzzing/clicking noises: compressor start components, condenser fan area, or vibration from an unlevel cabinet.

Quick checks we recommend first (in order)

1. Give it time after power loss or first plug-in: cooling can take up to 24 hours.
2. Confirm control settings: use the temperature guidance in the 79575196401 owner’s manual.
3. Make sure doors close and seal: push doors firmly shut; check for packages or bins holding the door open.
4. Clean the condenser coils: dirty coils reduce heat transfer and make the compressor work harder.
5. Check gasket condition: clean gaskets and the surfaces they touch; a thin coat of wax can reduce sticking.

Common problems and best next step

Problem you see	Most likely area	Best next step
Warm fridge/freezer	Coils, doors, controls	Clean coils; verify settings; check door closure
Frost buildup	Door seal, defrost system	Inspect gasket; look for door left ajar; check defrost symptoms
Door won’t shut	Leveling, bin alignment	Level cabinet; reseat bins/shelves; clear obstructions
Water/ice issues	Water supply, valve, tubing	Check shutoff valve; inspect lines; test inlet valve

Parts that commonly relate to these issues

If troubleshooting points to a water supply problem (no ice, weak dispenser flow, slow fill), the water inlet valve is a frequent culprit on this style of refrigerator, such as the refrigerator water inlet valve 5221JB2006K.

Why it matters

Cooling complaints are often caused by airflow, door sealing, or dirty condenser coils. Fixing those basics first prevents unnecessary part replacement and helps the compressor run cooler and more efficiently.

Last updated: January 2026