Whirlpool WRT518SZFB00 refrigerator Parts

For your Whirlpool WRT518SZFB00 top-mount refrigerator, the most reliable way to confirm cubic feet is to look up the capacity by model number. You can find the model and serial number on the inside wall of the refrigerator compartment, then use that model number to match the published capacity in the WRT518SZFB00 owner's manual.

• Check the model/serial label inside the fresh food section (inside wall), then match the model to the listed capacity.
• Use the manual/specs for your exact model so you do not rely on estimates.
• Estimate by measuring the interior (good for a ballpark): measure usable interior height, width, and depth in inches.
• Convert cubic inches to cubic feet: divide by 1,728.
• Measure usable space only (subtract thick insulation areas, air channels, and fixed housings).

1. Empty the compartment enough to measure flat-to-flat.
2. Measure interior width x interior height x interior depth (in inches).
3. Multiply to get cubic inches.
4. Divide by 1,728 to get cubic feet.

Cubic feet helps you compare refrigerator sizes accurately, plan food storage, and confirm fit for accessories and organization bins. Using the exact model (WRT518SZFB00) avoids confusion because similar-looking Whirlpool top-mount units can have different capacities.

Last updated: February 2026

The biggest problem we see in Whirlpool refrigerators like model WRT518SZFB00 is loss of cooling (warm fridge or freezer), because many other complaints (soft ice, food spoilage, odd noises) start when airflow or heat removal is reduced. Use the WRT518SZFB00 owner's manual troubleshooting section to narrow it down fast.

• Not cold enough in fresh food section: restricted airflow, frost buildup, or a failed evaporator fan
• Freezer cold but fridge warm: damper or airflow issue, frost on evaporator, fan not moving air
• Water leaking or puddles: clogged/iced defrost drain, water line connection issue
• Ice maker slow, small cubes, or bad-tasting ice: water supply issue, mineral-heavy water, or filter/water system needs attention
• Clicking, buzzing, or humming: start device or compressor circuit symptoms

1. Confirm temperatures: set freezer near 0°F and refrigerator near 37°F (typical targets).
2. Check airflow: make sure vents are not blocked by food packages.
3. Listen for the evaporator fan: when the compressor is running, you should typically hear a steady fan sound.
4. Inspect for frost buildup: heavy frost on the back freezer panel often signals a defrost or airflow problem.
5. Look for simple water causes: kinked water tube, loose fitting, or an iced drain.

If your WRT518SZFB00 is warm and you confirm the compressor is running, these are frequent fixes:

Cooling problems are the root cause behind many Whirlpool refrigerator complaints. Restoring proper airflow (evaporator fan) and heat removal helps stabilize temperatures, improves ice production, and prevents food spoilage.

Last updated: February 2026

For a Whirlpool top-mount refrigerator like model WRT518SZFB00, the model number is printed on the appliance identification label inside the fresh food (refrigerator) compartment, typically on an inside wall. Use that exact model number when ordering parts or looking up service information in the WRT518SZFB00 owner's manual.

On Whirlpool refrigerators, the model and serial number label is usually easy to spot once the refrigerator door is open.

• Check the inside wall of the refrigerator compartment (most common location)
• Look near the front edge of the liner (where you can read it without removing shelves)
• Inspect the side walls and back wall at eye level
• If you do not see it right away, look around the crisper drawer area (some labels are placed lower)

Record both numbers exactly as shown; they are used for parts matching, troubleshooting, and service.

Small differences in a Whirlpool model number can change the correct part (for example, a door gasket, control, or fan motor).

• Copy the model number character-for-character (including any trailing digits)
• Take a clear photo of the label before you start shopping for parts
• Use the model number (not the brand name) when searching for diagrams and parts lists
• If the label is hard to read, gently clean it with a damp cloth and dry it

Using the exact model number helps us match the right Whirlpool refrigerator parts the first time, which prevents returns and avoids installing a part that looks similar but does not fit or connect correctly.

Last updated: February 2026

Most Whirlpool refrigerators last 10 to 18 years with normal household use. For your Whirlpool WRT518SZFB00 top-mount refrigerator, consistent care (good airflow, clean coils, solid door sealing, correct temperatures) is what most often determines whether you land closer to 10 years or closer to 18.

• Condenser coil cleanliness (dust buildup makes the compressor work harder)
• Door gasket seal quality (air leaks cause longer run times and frost)
• Ventilation around the cabinet (tight spaces trap heat)
• Temperature settings and loading habits (overpacking blocks airflow)
• Ice maker and water system upkeep if equipped (leaks and clogs add stress)

• Vacuum coils and the area underneath regularly.
• Keep doors closing fully; avoid bins or packages blocking the door.
• Set and confirm temps: 37°F to 40°F fresh food, 0°F freezer.
• Leave space around vents inside the compartments for airflow.
• Level the refrigerator so doors self-close and seal evenly.

If you are troubleshooting warm temperatures or poor airflow, the evaporator fan is a common starting point; for this model that includes the refrigerator evaporator fan motor WP2315539.

A refrigerator that runs longer to hold temperature uses more energy and puts extra wear on the compressor and controls. Simple upkeep, especially keeping airflow and seals in good shape, is the most reliable way to extend service life.

For model-specific use and care guidance (including operating and maintenance details), follow the WRT518SZFB00 user instructions manual.

Last updated: February 2026