Kenmore 41743042300 washer Parts

Your Kenmore washer’s model number is printed on the identification plate; on model 41743042300, it’s located at the top, inside of the door opening. Once you have that full model number, we can match the correct replacement parts and documentation.

Where to look on Kenmore model 41743042300

Check these common spots in this order:

• Top, inside of the door opening (most common for this front-load style)
• Around the door frame or inner front panel near the latch area
• On the rear panel near the power cord entry
• Inside the cabinet behind the lower access area (if your unit has a service panel)

For a picture-style location reference and model-specific details, use the 41743042300 owner’s manual.

What the model tag looks like (and what to write down)

The identification plate typically includes:

• Model number (example format: 417.xxxxxxxx)
• Serial number (unique to your washer)
• Sometimes the manufacturing date or code

Write the model and serial number exactly as shown; one missing digit can point to the wrong Kenmore parts list.

You need	Why we ask for it	Example
Model number	Matches parts and diagrams	41743042300
Serial number	Helps confirm production run details	Varies

Why it matters

Kenmore washers often share similar cabinets and controls across multiple versions, but parts like the door lock, drain pump, and water inlet valve can differ by model. Using the exact model number prevents ordering a part that will not fit.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore washer, especially a proven model like Kenmore 41743042300, when the fix is a common wear part and the total repair cost is clearly less than replacing the machine. We also recommend a diagnosis first so you repair the right part the first time.

How we decide if repair makes sense

Use these practical checkpoints before you spend money on parts or labor:

• Compare total repair cost vs. replacement: parts + labor + any follow-up visit.
• Confirm the failure is isolated (drain, fill, door lock, vibration) and not multiple systems.
• Check for leaks and safe operation after any repair, as outlined in the installation guide.
• Prioritize repairs that restore core functions: filling, draining, spinning, and door locking.
• Avoid repeat failures by fixing the root cause (clogs, siphoning, unlevel install, oversudsing).

Common repairs that are often worth it on this model

These are frequent, straightforward fixes on front-load washers like the 417-series:

Symptom	Likely area	Example part for this model	Typical outcome
Won’t start or won’t lock	Door latch/lock	Door catch 131763256	Restores safe door locking and cycle start
Won’t drain or stops mid-cycle	Drain pump or drain path	Washer drain pump (model-specific)	Restores draining and spin completion
Excessive shaking or banging	Suspension/shocks, leveling	Level shock kit	Reduces vibration and out-of-balance events
Water on floor at front	Door boot/bellows	Bellows	Stops leaks at the door opening

Quick checks before you commit to a repair

These steps prevent unnecessary parts replacement:

• Verify the drain hose setup; the install instructions warn that no U-shape and no air gap can cause siphoning and poor draining.
• Run a complete cycle and check for leaks and proper operation after any change.
• Disconnect power before any user maintenance; turning controls off does not fully disconnect power.
• Confirm the model number from the ID plate inside the door opening; then match parts to 41743042300.

Why it matters

A correct diagnosis and a targeted repair can extend the life of a dependable Kenmore front-load washer for years. The owner documentation also emphasizes proper installation and safe servicing practices, which helps prevent repeat problems and protects major components.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 41743042300 front-load washer, routine care (proper loading, correct detergent, and periodic cleaning) helps you reach the longer end of that range and reduces wear on key parts like the drain system and door lock.

Typical lifespan and what affects it

Most washers fall into a predictable service-life range, but usage and maintenance make a big difference.

• 10 to 15 years is the normal lifespan for a residential washer.
• Heavy weekly loads, frequent hot washes, and overloading shorten life.
• Good installation (leveling, stable flooring) reduces vibration-related wear.
• Using HE detergent correctly helps prevent residue and odor issues.
• Addressing small leaks early helps protect bearings, wiring, and controls.

Quick maintenance checklist (helps extend life)

Use these habits to keep your 41743042300 running longer.

• Keep loads balanced; avoid packing the drum tight.
• Leave the door slightly open between loads to dry the boot area.
• Inspect the door seal for debris and wipe it dry.
• Check fill hoses for bulges or seepage; replace if worn.
• If draining is slow, inspect the drain path and consider the condition of the washer drain pump 137108000.

Common “end-of-life” symptoms and likely areas

Symptom	What it often points to	Example related part
Won’t drain or drains slowly	Drain pump or drain hose restriction	Washer drain pump 137108000 or washer drain hose 134592700
Door won’t lock or won’t start	Door lock/catch issue	Door catch 131763256
Excessive shaking or banging	Suspension wear or leveling issue	Level shock 5304485917

Why it matters

Knowing the typical lifespan helps you decide whether to repair or replace. If your 41743042300 is under 10 years old, repairs like a drain pump, door catch, or shock kit often restore reliable operation and are usually more cost-effective than replacement.

For model-specific operating and care steps, follow the 41743042300 owner's manual.

Last updated: February 2026