Installation guide
Owner’s manual
Error Codes
Can I look up Frigidaire parts by model number?
Yes. For your Frigidaire electric range model FEF366EBE, looking up parts by the full model number is the most reliable way to match the correct bake element, surface element switch, oven temperature sensor, and other replacement parts to your exact configuration.
On this range, the serial plate is typically accessed by opening the storage drawer (some models) or removing the outer lower panel (some models). The model number and serial number are listed there.
- Open the storage drawer and look for the serial plate label
- If there is no drawer label, check behind the outer lower panel
- Write the model number exactly as shown (letters and numbers)
- Use the full model number when searching, not a partial
- Keep the serial number handy; it helps confirm production details
For diagrams and model-specific identification details, use the FEF366EBE owner's manual.
Searching by model number narrows results to parts that fit your range’s design (cooktop style, control type, and oven features can vary by model).
Best practice workflow
- Search using FEF366EBE
- Confirm the part name matches the symptom and location
- Compare the part ID/number to the one listed for your model
- Review installation notes and safety steps in the manual
These are frequent replacements on electric ranges like the FEF366EBE:
| Symptom | Likely part to check | Example part for this model |
|---|---|---|
| Oven will not bake or heats unevenly | Bake element | Frigidaire range bake element 316075103 |
| Oven temperature seems inaccurate | Oven temperature sensor | Frigidaire range oven temperature sensor 316490000 |
| Surface element will not heat or won’t regulate | Surface element control switch | Frigidaire range surface element control switch 316436001 |
| Oven light out | Oven light bulb or socket | Range oven light bulb, light socket |
Model-number lookup prevents ordering a part that looks similar but mounts differently, uses a different connector, or has a different wattage rating. That saves time, avoids returns, and gets your Frigidaire range back to safe, consistent cooking.
Last updated: February 2026
How do I reset my Frigidaire electric range?
To reset your Frigidaire FEF366EBE electric range, we turn the range off, then disconnect power for about 30 seconds (unplug it or switch the breaker off), and restore power. After power returns, reset the clock and any oven settings using the FEF366EBE owner's manual.
- Turn all surface element knobs to OFF.
- If the oven is running, turn the oven function OFF.
- Unplug the range, or switch the range breaker OFF.
- Wait 30 seconds.
- Restore power.
- Set the clock again (a power interruption clears it).
A reset fixes many control glitches, but it will not correct a power supply problem. If all burners and the oven are not heating, we check the incoming power and the range wiring connections.
- Confirm the home breaker is fully reset (OFF then ON).
- If the range was recently installed, verify the power cord or hard-wire connections are tight.
- Check the terminal block area for loose or overheated connections.
- If only the oven will not heat, a failed heating component is more likely than a reset issue.
| Symptom | Most likely cause | What we check first |
|---|---|---|
| Nothing heats (cooktop and oven) | Supply voltage or wiring connection | Breaker, cord/hard-wire, terminal block |
| Cooktop works, oven does not | Oven heating circuit issue | Bake element, sensor, control |
| Oven heats poorly or unevenly | Weak element or temperature sensing issue | Element condition, sensor resistance |
If the oven is not heating but the cooktop works, these model-matched parts are common suspects:
- Frigidaire range bake element 316075103 (burned spot, blisters, or open circuit)
- Frigidaire range oven temperature sensor 316490000 (incorrect temperature feedback)
The manual warns not to operate the range during a power failure; when power resumes, the range can begin operating again and the clock must be reset. A proper reset also helps you confirm whether the issue is a simple control interruption or a true electrical or heating-part failure.
Last updated: February 2026
What does F23 mean on a stove?
On a Frigidaire FEF366EBE electric range, an F23 code points to a control-to-user-interface communication problem. The most common fix is reseating the wiring connections; if the code returns, the touch/control interface or the electronic control typically needs service.
- Press CLEAR/OFF to stop the beeping and clear the display.
- Disconnect power at the breaker for 1 minute, then restore power.
- If F23 returns, record the code and when it happens (bake, broil, preheat, idle).
- If the display is dead or erratic, check for a recent power outage or loose power cord connection.
- If you smell burning or see arcing, keep power off and have the range serviced.
| Likely cause | What you may notice | Typical next step |
|---|---|---|
| Loose or oxidized connector between control and interface | Code comes and goes, beeping | Reseat connectors with power off |
| Failing user interface (touch panel or keypad style) | Buttons do not respond, random beeps | Replace the interface assembly |
| Failing electronic oven control (clock/timer board) | Multiple F-codes, functions stop mid-cycle | Replace the control board |
| Power supply issue | Code after storms or flickering lights | Verify stable power, then retest |
Your use and care instructions explain that when the control detects a fault, you should press CLEAR/OFF, then reprogram; if the fault recurs, record the code and contact service. For control layout and any model-specific diagnostics, use the FEF366EBE owner’s manual.
If troubleshooting points to the electronic control, the clock/timer board is a common replacement on this model family. Use the exact part match for your serial range before ordering.
An F23 communication fault can interrupt baking or broiling and may cause repeated beeping. Addressing it early helps prevent mid-cycle shutdowns and reduces the chance of heat control problems.
Last updated: February 2026
