Kenmore 36291112001 electric range Parts

For Kenmore electric range model 36291112001, the model and serial number are printed on a label behind the range door or behind the storage drawer. Once you have that number, you can match it to the correct parts list and manual for your exact range.

Check these common label locations first:

• Behind the oven door (open the door and look around the frame area behind it)
• Behind the storage drawer (pull the drawer out and look on the frame behind it)
• On the frame near the lower front area (visible when the drawer is removed)

For diagrams and the exact label location callouts, use the 36291112001 owner’s manual.

Record both numbers exactly as shown:

• Model number (identifies the exact design and parts)
• Serial number (helps confirm production details for service)
• Any suffixes or extra digits (they can change which parts fit)

Kenmore ranges often look similar across multiple model series, but parts like a surface element control switch, terminal block, or oven light components can vary by model. Using the exact model number prevents ordering the wrong part and saves repair time.

Last updated: January 2026

Kenmore is a brand name, and different manufacturers have built Kenmore ranges over the years. For Kenmore electric range model 36291112001, the most reliable way to identify the original manufacturer is to use the model and serial label location shown in the 36291112001 owner's manual and match the model prefix to the maker.

Use these quick checks on your range:

• Find the model and serial label behind the oven door or behind the storage drawer.
• Confirm the model number is 36291112001 (character-for-character).
• Write down the serial number too; it helps when cross-referencing service information.
• Compare the model prefix (the first 3 digits) to common Kenmore prefix lists used for manufacturer identification.
• If you are ordering parts, match by model number first; then confirm the part fits your exact configuration.

The manual for this Kenmore electric range states the label is typically located behind the range door or behind the storage drawer.

Kenmore did not manufacture most appliances themselves; the actual builder can vary by model series. Identifying the manufacturer helps when you are comparing replacement parts (like a terminal block, surface element switch, or oven control thermostat) and following service procedures.

Last updated: January 2026

Yes. On the Kenmore 36291112001 electric range, we can replace a failed oven heating element (bake or broil) by shutting off power, removing the element mounting screws, transferring the wires to the new element, and reassembling. Use the 36291112001 owner's manual for the exact access method and screw locations.

Working around heating elements and live wiring is hazardous, so we always start by making the range safe and stable.

• Turn off power at the house circuit breaker (or remove the fuse) and confirm the oven is off
• Let the oven cavity and element cool completely
• Pull the range forward only if needed; avoid stressing the power cord
• Wear work gloves; sheet metal edges inside the oven can be sharp
• Take a quick photo of the wire positions before disconnecting anything

Most bake elements mount to the rear oven wall with 2 screws and connect with 2 wires.

1. Remove oven racks for working room.
2. Remove the 2 element mounting screws.
3. Gently pull the element forward a few inches.
4. Disconnect the two wires (one at a time) and keep them from slipping back through the insulation.
5. Connect the wires to the new element, then reinstall the screws.
6. Restore power and test Bake.

If your oven is not heating after replacement, check for a tripped breaker and inspect the wiring/terminals for heat damage.

For broil issues on this model, the correct replacement is the range broil element WB30X46986.

A weak or open heating element can cause long preheat times, uneven baking, and temperature swings. Replacing the correct element restores normal heating performance and helps protect other components (like wiring and controls) from overheating.

Last updated: January 2026

For Kenmore electric range model 36291112001, the oven’s wattage depends on which heating function is running. Most electric ovens use roughly 2,000 to 5,000 watts while actively heating (bake or broil), cycling on and off to hold temperature; confirm your exact ratings in the 36291112001 owner’s manual.

When people ask about oven wattage, they typically mean one of these:

• Bake element wattage (main heat source for baking)
• Broil element wattage (top element for broiling)
• Total oven heating load (bake and broil do not usually run at full power together)
• Other loads (oven light, clock/timer, indicator lights)

These ranges fit most Kenmore freestanding electric ranges of this style:

• Bake element: ~2,000 to 3,500 watts
• Broil element: ~3,000 to 4,500 watts
• Oven light: typically 40 watts (many models use a 40-watt appliance bulb)

Wattage tells you the maximum draw while heating. Actual usage is lower because the thermostat cycles the element.

• kWh = (watts ÷ 1,000) × hours heating
• Example: a 3,000-watt bake element running 30 minutes of “on time” uses about 1.5 kWh.

Knowing the oven’s wattage helps you estimate operating cost, confirm your kitchen circuit capacity, and troubleshoot issues like weak heating or frequent breaker trips.

Last updated: January 2026