Frigidaire LFGF3053QFD gas range Parts

Yes. Looking up parts by model number is the most accurate way to get compatible replacement parts for your Frigidaire gas range model LFGF3053QFD, because the model number ties directly to the correct diagrams, part lists, and revisions shown in the LFGF3053QFD owner's manual.

For this Frigidaire range, the identification plate is on the right-hand surface of the oven front frame. You typically access it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your configuration).

• Open the lower drawer fully and look up at the oven front frame
• Write down the model number and serial number exactly as shown
• Also record any lot number/letter listed on the plate
• Use that full information when ordering parts or requesting service

Once you have LFGF3053QFD, you can match parts by function (igniter, sensor, valve, burner cap) and confirm fit by the model-specific listing.

Common examples for this model include:

• Tappan range oven burner igniter 316489403 for bake ignition problems
• Range oven temperature sensor 316490000 for inaccurate oven temperatures
• Frigidaire range broil igniter 5304506545 for broil not heating

Ranges often have multiple versions that look identical but use different igniters, sensors, or control components. Using the exact LFGF3053QFD model number helps prevent wrong-part returns and gets your oven back to safe, reliable ignition and temperature control faster.

Last updated: February 2026

For your Frigidaire LFGF3053QFD gas range, the model number is printed on the appliance’s serial plate. On this style of range, you’ll typically find it by opening the storage drawer (or, on some versions, removing the lower front panel) and reading the label.

Check these common serial plate locations first:

• Open the storage drawer and look for a label on the frame area behind it
• If there’s no storage drawer label, remove the lower front panel and look behind it
• Use a flashlight and wipe dust or grease off the label so the characters are readable
• Write the model number and serial number exactly as shown (letters and numbers)

Frigidaire model numbers are a mix of letters and numbers. For this model page, the correct model format is LFGF3053QFD.

Using the exact model number prevents ordering the wrong igniter, temperature sensor, or control part. Even small model variations can change burner components, wiring, and mounting hardware.

If you want a visual reference for the serial plate location and what to record, use the LFGF3053QFD owner's manual.

Last updated: February 2026

Most Frigidaire gas ranges, including model LFGF3053QFD, last 13 to 15 years with normal household use. With consistent cleaning, correct burner setup, and timely repairs (especially ignition and temperature-sensing parts), it’s common to reach the upper end of that range.

• How often you cook (daily high-heat use shortens life faster than occasional use)
• Cleaning habits, especially around surface burners and the oven cavity
• Ignition health (weak igniters cause longer heat-up times and extra wear)
• Heat accuracy (a drifting sensor can lead to overheating and stress components)
• Door and rack wear (slamming the door and overloading racks accelerates damage)

For model-specific care and cleaning routines, follow the LFGF3053QFD owner's manual.

If your oven stops heating reliably or takes too long to ignite, these are common wear items on gas ranges:

• Tappan range oven burner igniter 316489403 (bake ignition)
• Frigidaire range broil igniter 5304506545 (broil ignition)
• Range oven temperature sensor 316490000 (temperature accuracy)
• Appliance light bulb, 40-watt 316538904 (visibility, not heating)

A gas range often feels “old” when it heats slowly, bakes unevenly, or the burners don’t light consistently. Addressing ignition and temperature issues early helps your LFGF3053QFD cook more accurately and reduces stress on the control and gas components.

Last updated: February 2026

On the Frigidaire LFGF3053QFD gas range, the most commonly replaced parts are igniters (surface, bake, and broil), the oven temperature sensor, and wear items like oven racks and the oven light bulb. These parts take the most heat and use, so they fail first.

• Oven burner igniter: oven will not heat, slow ignition, gas smell before lighting (common bake issue). Consider tappan range oven burner igniter 316489403.
• Broil igniter: broil will not light or takes too long to ignite. Consider Frigidaire range broil igniter 5304506545.
• Oven temperature sensor: oven temperature is inaccurate, overbakes or underbakes. Consider range oven temperature sensor 316490000.
• Oven light bulb (40-watt appliance bulb): oven light out. The Use & Care guide specifies a 40-watt appliance bulb and notes the glass shield must be in place during use.
• Oven racks: bent racks, peeling finish, or racks that no longer slide well.
• Surface burner parts (cap, burner head, igniter/orifice holder): clicking, uneven flame, or a burner that will not light.

Replacing the right part restores safe ignition, stable oven temperature, and predictable cooking results. For example, a weak igniter can prevent the gas valve from opening fully, and a drifting sensor can make baking inconsistent.

• Match the model number LFGF3053QFD and compare the part description carefully.
• For oven light replacement steps and safety notes (power off, bulb type, glass shield), use the LFGF3053QFD owner’s manual.
• If the issue is on the cooktop, clean burner ports and confirm the cap is seated correctly before replacing parts.

Last updated: February 2026