Kenmore 79641302610 washer Parts

You can tell which Kenmore washer you have by finding the model and serial number label on the machine and matching the model number to your paperwork and parts list. For Kenmore model 79641302610, the label is typically on the cabinet opening (door jamb) or on the back or side of the cabinet; confirm the exact location in the 79641302610 owner's manual.

Where to look for the model number label

Check these common spots on Kenmore front-load washers like 79641302610:

• Inside the door opening on the cabinet frame (door jamb)
• Behind the door area (around the opening where the door closes)
• On the back of the washer cabinet
• On a side panel near the bottom edge
• Occasionally behind or near the control panel area

What to write down (and why)

Record the information exactly as shown on the label:

• Model number (example: 79641302610)
• Serial number (used to identify production run and revisions)
• Color code or suffix (some Kenmore 796 models use a color digit or suffix)

Why it matters

Kenmore model numbers can look similar, but small differences change the correct replacement parts (like a door lock, drain pump motor, or water inlet valve) and the right troubleshooting steps.

Quick ID checklist

Use this table to confirm you are reading the right information.

Item on label	What it tells you	How you use it
Model number	Exact washer version	Match parts to 79641302610
Serial number	Build sequence/date range	Helps confirm compatible revisions
Color/suffix	Finish/variant	Prevents ordering the wrong cosmetic parts

If the label is hard to read

Try these practical steps:

• Wipe the label gently with a damp cloth and mild soap; dry it fully
• Use your phone camera and zoom in (flash off reduces glare)
• Copy the model number exactly, including all digits
• Compare it to the model number printed on your Use & Care Guide

Last updated: February 2026

The Kenmore washer model 796.41302610 is a front-loading washer in the 796.4130* series; its exact tub capacity in cubic feet is listed in the specifications section of the 79641302610 owner's manual.

How to find the exact capacity for model 79641302610

We recommend using the model-specific specs table because capacity can vary by series and revision.

• Open the 79641302610 owner's manual
• Look for “Key dimensions and specifications” or “Specifications”
• Find the line for capacity (often shown as “cu. ft.”)
• If the manual lists a series (such as 796.4130*), match it to your full model number on the rating label inside the door

Quick model check (so you use the right spec)

Your washer’s identification plate is located inside the washer door. Matching that label to the manual ensures you are using the correct capacity and feature set.

What to match	Where to find it	Why it matters
Model number: 79641302610	Inside the washer door	Confirms the correct spec table
Series reference: 796.4130*	Front page of the manual	Indicates the manual covers your model family
Dimensions (W x D x H)	Specs section	Helps confirm you are reading the right unit

Why it matters

Capacity affects load sizing, cycle selection, and detergent dosing (especially with HE detergent). Using the correct cubic-foot rating helps prevent overloading, poor rinsing, and excess suds.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 79641302610 front-load washer, routine care (using HE detergent, avoiding overloads, and keeping water moving through the drain system) helps you reach the high end of that range; see the 79641302610 owner's manual.

Typical lifespan and what affects it

Most front-load washers land in the same 10 to 15 year window, and these factors make the biggest difference:

• Load size and balance: frequent overloading increases wear on suspension and bearings.
• Detergent choice: use HE (low-sudsing) detergent to reduce oversudsing and long cycle stress.
• Moisture control: wiping the door area and leaving the door ajar helps prevent odor and boot damage.
• Drain health: coins, lint, and small items can strain the pump and slow draining.
• Water quality: hard water can increase scale buildup and reduce heating efficiency (if equipped).

Parts that commonly limit washer life

When a washer stops draining, won’t lock, or starts leaking, these are frequent culprits on front-load designs:

Symptom	Common area	Example part for 79641302610
Won’t drain or drains slowly	Drain pump system	Drain pump motor (4681EA2001T) - washer part by lg electronics 4681EA2001T
Door won’t lock or won’t start	Door lock/strike	Lg washer door lock EBF61315802
Leaks at the door	Door boot/clamp	Lg washer door boot MDS47123618

Why it matters

A realistic lifespan helps you decide whether to repair or replace. If your 79641302610 is under 10 years old, fixing a single failed part (like a drain pump motor or door lock) often restores reliable operation; beyond 10 to 15 years, multiple wear items can start stacking up.

Quick habits that extend life

• Use the manufacturer-recommended amount of HE detergent.
• Run periodic tub-clean cycles (or a hot cycle) to reduce residue.
• Check pockets to keep debris out of the pump.
• Keep the washer level to reduce vibration and suspension wear.

Last updated: February 2026

Yes; for Kenmore model 79641302610, repairing is usually worth it when the fix restores reliable washing and costs less than replacing the washer. Common, high-value repairs include drainage, filling, and door-latch issues, especially when the cabinet and tub are in good shape. See the 79641302610 owner's manual for operating and care details that can prevent repeat failures.

When repair is the smart choice

Repair typically makes sense when the problem is isolated to a serviceable part and the washer otherwise runs smoothly.

• The washer won’t drain or drains slowly (often a pump or hose restriction)
• The washer won’t fill or fills inconsistently (often an inlet valve issue)
• The door won’t lock or the cycle won’t start (often a door lock or strike)
• The washer is generally quiet, does not leak, and the tub spins normally
• You want to extend the life of a front-load washer with a targeted fix

Quick cost-to-value check

Use this simple comparison to decide quickly.

What you’re seeing	Likely repair area	Example model-matched part to check
Standing water, “no drain” symptoms	Drain pump system	Drain pump motor (4681EA2001T) - washer part by lg electronics 4681EA2001T
No water or slow fill	Water inlet valve	Lg washer water inlet valve 5220FR2075L
Door won’t latch, won’t start	Door lock/strike	Lg washer door lock EBF61315802

What to check before you spend money

These steps help avoid replacing parts that are not actually bad.

• Confirm the load is not over-sudsing; excess suds can extend cycles and stop spinning to prevent leaking (use HE detergent and do not over-dose).
• Clean the drain path (filter area if equipped, tub-to-pump hose, and drain hose routing).
• Verify hot and cold supply valves are fully open; check inlet screens for debris.
• Inspect the door strike for cracks or looseness; a misaligned strike can mimic a bad lock.
• Run a rinse and spin test cycle after any cleaning to confirm the symptom is gone.

Why it matters

A front-load washer like the Kenmore 796.4130* platform is often very repairable; replacing a single component (pump, inlet valve, or door lock) can restore full function and prevent secondary issues like leaks, odor, or repeated cycle interruptions.

Last updated: February 2026