Owner’s manual
Error Codes
How many cubic feet is my Kenmore Coldspot refrigerator model 10658124700?
Your Kenmore Coldspot side-by-side refrigerator model 10658124700 is about 21.9 cubic feet total capacity. Use the 10658124700 owner's manual to confirm the exact capacity and how it is defined for your specific configuration.
We recommend checking the model’s rating information and documentation so you’re matching the correct capacity type (total vs. refrigerator vs. freezer).
- Look for the model and serial tag inside the fresh food compartment (often on a side wall)
- Confirm the full model number is 10658124700 (not a similar 106-series model)
- Check the specifications section in the manual for listed capacity
- If you are comparing to another refrigerator, compare total cubic feet, not just fresh food space
Capacity is the interior volume measurement. Depending on the source, you may see:
| Capacity label | What it includes | How it’s used |
|---|---|---|
| Total capacity | Refrigerator + freezer | Best for overall size comparisons |
| Fresh food capacity | Refrigerator section only | Best for grocery storage planning |
| Freezer capacity | Freezer section only | Best for frozen storage planning |
Knowing the cubic feet helps you choose correctly sized replacement shelves, bins, and storage accessories, and it also helps when planning food storage and airflow (overpacking can reduce cooling performance).
If you are refreshing storage or water/ice performance on this model, these are common replacements:
- Refrigerator water filter cap (black) WP2260518B
- Refrigerator glass shelf WPW10276354
- Refrigerator crisper pan WP2188656
Last updated: February 2026
What is the code Sy Ef on a Kenmore refrigerator?
The SY EF code on a Kenmore refrigerator typically points to an evaporator fan circuit problem (the fan in the freezer that moves cold air). On Kenmore model 10658124700, start by checking for ice buildup blocking airflow and confirm the fan runs when the freezer door switch is pressed; then follow the diagnostic steps in the owner's manual.
- Power reset: Unplug the refrigerator for 2 minutes, then plug it back in.
- Airflow blockage: Make sure packages are not blocking the freezer vents.
- Frost buildup: Heavy frost on the freezer back panel often indicates a defrost or airflow issue.
- Door switch test: Press the freezer door switch; you should typically hear the evaporator fan run.
- Condenser area: Clean dust from the condenser area to help cooling performance.
| What you notice | Most likely issue | What to do next |
|---|---|---|
| Freezer cold but fresh food warm | Poor airflow from freezer | Check evaporator fan operation and vent blockage |
| Loud buzzing or grinding from freezer | Fan blade hitting ice or failing motor | Defrost ice buildup; inspect fan area |
| Heavy frost on freezer back wall | Defrost system problem | Check defrost components and airflow |
| Intermittent cooling | Loose connection or failing fan | Inspect wiring connections; test fan |
If troubleshooting points to airflow or defrost trouble, these model-matched parts are commonly involved:
- Refrigerator defrost bi-metal WPW10225581 (helps protect the defrost circuit from overheating)
- Refrigerator thermostat WP2198202 (temperature control component that can affect cooling behavior)
When the evaporator fan is not moving air correctly, the refrigerator can’t balance temperatures between the freezer and fresh food sections. That leads to warm temperatures, soft ice, and longer run times.
Last updated: February 2026
What causes a Coldspot 10658124700 to stop cooling?
A Kenmore 10658124700 (Coldspot-style) side-by-side refrigerator usually stops cooling because airflow is blocked, the temperature controls are set to OFF or too warm, or a key cooling component (fans, defrost system, or compressor start components) is failing. Start with power, control settings, and airflow checks from the owner's manual.
- Confirm the unit has power (outlet works, breaker not tripped).
- Make sure the refrigerator controls are ON and not set to OFF.
- Allow a full 24 hours after a new install or major temperature change.
- Do not block air vents between the freezer and fresh food sections.
- Make sure doors close fully and are not being held open by bins or food.
| What you notice | Likely cause | What to do next |
|---|---|---|
| Freezer cold, fridge warm | Airflow problem (blocked vents, weak evaporator fan, heavy frost) | Clear vents; listen for fan; check for frost buildup |
| Both sections warm, lights work | Controls OFF, compressor not running, start issue | Verify settings; listen for hum/click; check condenser area |
| Frost/ice on freezer back wall | Defrost system problem | Defrost and inspect defrost components |
| Ice maker and water slow too | Low water pressure or supply issue | Check shutoff valve and water line for kinks |
If diagnostics point to a failed component, these are examples of parts listed for model 10658124700 that can be involved in cooling or related symptoms:
- Refrigerator thermostat WP2198202 (temperature control issues)
- Refrigerator defrost bi-metal WPW10225581 (frost buildup from defrost problems)
- Run capacitor WPW10662129 (compressor start/run problems)
- Refrigerator compressor W10309990 (no cooling when sealed system is not operating)
This refrigerator cools by moving cold air from the freezer into the fresh food section. When vents are blocked or frost builds up, temperatures rise even if the compressor is running, and food safety can become a concern.
Last updated: February 2026
