Kenmore 2535436940P refrigerator Parts

On Kenmore model 2535436940P, the model number is printed on the serial plate located inside the refrigerator (fresh food) compartment. Open the refrigerator door and look along the interior walls near the front for the label that lists both the model and serial numbers (see the owner's manual).

How to find the label fast

• Open the fresh food (refrigerator) door, not the freezer door
• Look for a serial plate or rating label inside the compartment
• Check the upper side walls and the front edge area near the door opening
• Use a flashlight; the print can be small
• Write down the full model number exactly as shown: 2535436940P

What you should see on the serial plate

Most Kenmore side-by-side refrigerators list these items together on the same label:

Label item	What it’s used for	Example format
Model number	Matching parts and diagrams	2535436940P
Serial number	Identifying production run	Letters and numbers
Electrical info	Safe power requirements	Volts/amps

Why it matters

We use the model number to match the correct Kenmore parts for your exact configuration (ice maker, water dispenser, door style, and internal components). Using the full model number helps you avoid ordering the wrong part, such as the genuine Kenmore refrigerator water filter WF2CB (replacement cartridge 9911).

Last updated: February 2026

On Kenmore model 2535436940P, the water filter is located in the upper right front corner of the fresh food (refrigerator) compartment, in the filter housing. You access it from inside the refrigerator section, not from the back of the unit.

How to find it quickly

• Open the fresh food (right-side) door.
• Look at the top front area, upper right corner.
• Identify the filter housing and the release button next to the cartridge.
• Keep a paper towel handy; a small amount of water can drip during removal.
• You do not need to shut off the household water supply to change the filter.

Basic filter change steps (what we recommend)

Follow the steps in the owner's manual. In general, the process is:

• Turn the ice maker power switch to Off (O).
• Press the filter release button (to the right of the cartridge).
• Support the cartridge as it slides out so it does not drop.
• Install the new cartridge fully into the housing.
• Run and discard several glasses of water to clear air and carbon fines.

Replacement filter and service interval

This model uses the Kenmore replacement cartridge 9911. The compatible replacement part on this page is the genuine Kenmore refrigerator water filter WF2CB.

Item	What to expect
Typical replacement timing	Every 6 to 9 months
Filter status light behavior	Often turns red around 400 gallons
If the refrigerator sat unused	Replace the filter before using again

Why it matters

A correctly installed, on-time water filter helps protect water flow to the dispenser and ice maker, improves taste and odor, and reduces the chance of dispenser or ice maker performance issues caused by restricted flow.

Last updated: February 2026

Yes. We still offer replacement parts for Kenmore refrigerators, including the Kenmore 2535436940P side-by-side. You can match parts by model number and then choose the exact component you need, such as filters, valves, thermostats, gaskets, and dispenser parts.

What to check first (so you get the right part)

• Confirm the full model number: 2535436940P (use the complete number from the rating label)
• Identify the system you’re repairing: ice maker, water dispenser, cooling, defrost, lighting, or doors
• Compare the part name and part ID to your original part
• Use the diagrams and part lists in the owner's manual to confirm location and access
• If you’re replacing a water filter, follow the filter change steps and flushing guidance in the manual

Common Kenmore 2535436940P parts customers replace

Here are examples of parts available for this model that commonly solve everyday issues:

Symptom	Likely part category	Example part on this model
Bad taste/slow water flow	Water filter	Genuine Kenmore refrigerator water filter WF2CB
No water to dispenser/ice maker	Water inlet valve	Refrigerator water inlet valve assembly 242252702
Frost buildup, warm temps	Defrost system	Refrigerator defrost heater 242044113 or refrigerator defrost bi-metal thermostat 5303918214
Dim or no interior light	Lighting	Refrigerator light bulb 316538904
Door not sealing, sweating	Door seal	Refrigerator gasket 241786015

Why it matters

Using model-matched parts helps your refrigerator cool correctly, prevents leaks at the water line, and keeps the ice and water system working reliably. For example, the manual notes the refrigerator water filter cartridge is an expendable item with a shorter warranty period than the refrigerator itself, so filter replacement is a normal maintenance need.

Last updated: February 2026

Kenmore side-by-side refrigerator model 2535436940P has a total capacity of 25.6 cubic feet. You can also confirm the capacity and other specifications in the owner's manual for your exact configuration.

Quick specs snapshot

Model	Refrigerator type	Total capacity
2535436940P	Side-by-side refrigerator	25.6 cu. ft.

How to verify on the appliance (if you want to double-check)

These locations commonly list capacity and electrical ratings:

• Rating plate inside the fresh food compartment (side wall or ceiling area)
• Model and serial label area near the crisper drawers (varies by build)
• Specifications section in the owner's manual

Why it matters

Capacity helps you compare similar Kenmore refrigerators, plan food storage, and set expectations for temperature recovery after loading groceries. It also helps when you are matching storage accessories like bins and shelves.

Related maintenance parts customers often replace

If you are maintaining the water and ice system on this model, these parts are commonly used:

• Genuine Kenmore refrigerator water filter WF2CB
• Refrigerator water inlet valve assembly 242252702

Last updated: February 2026

On Kenmore refrigerator model 2535436940P, an ER IF message is not a standard, documented code in the owner documentation; when customers see it, it typically points to an ice and airflow problem around the ice maker area (fan not moving air, frost buildup, or a dispenser air leak). Use the owner's manual to confirm what your display is reporting and where to access components.

What to do right away

• Power reset: unplug the refrigerator for 5 minutes, then plug it back in.
• Check freezer temperature: set the freezer colder and allow 24 hours to stabilize.
• Look for frost/ice: inspect the back freezer panel and the ice maker area for heavy frost.
• Check the dispenser chute door: make sure it closes fully so warm air is not entering.
• Listen for fan operation: a steady fan sound in the freezer usually indicates airflow is working.

Common causes that match ER IF-type symptoms

What’s happening	What you’ll notice	What usually fixes it
Frost blocking airflow	Weak ice production, warmer temps, frost on rear panel	Defrost and correct the cause of frost
Fan blade rubbing or broken	Rattling, ticking, intermittent airflow	Replace the refrigerator evaporator fan blade 5308000010
Defrost system not clearing frost	Frost returns quickly after defrosting	Test/replace defrost components
Dispenser air leak	Frost near chute, clumped ice	Repair the chute door seal/closure

Parts that commonly relate to frost and airflow issues

If you find heavy frost that keeps returning, these parts are often involved:

• Refrigerator defrost heater 242044113
• Refrigerator defrost bi-metal thermostat 5303918214

Why it matters

Airflow problems and recurring frost reduce ice production and cooling performance. The refrigerator runs longer to maintain temperature, which increases wear on the sealed system and can lead to more frequent temperature swings.

Last updated: February 2026