Kenmore 25361762012 refrigerator Parts

Your Kenmore refrigerator’s model number is printed on the appliance’s rating label; on model 25361762012, that label is typically inside the fresh food compartment or freezer compartment, often on an interior side wall or near the crisper area. Use the full model number when ordering parts.

Where to look on a Kenmore top-mount refrigerator

Check these common label locations first:

• Inside the refrigerator compartment on a side wall
• Inside the freezer compartment on a side wall
• On the frame just inside the door opening
• Behind or near the lower crisper drawers
• Near the front base area (behind the toe grille or kickplate)

What the model number label looks like

Most Kenmore rating labels include several fields. Here is what to capture:

What to record	Example	Why you need it
Model number	25361762012	Ensures correct part fit and diagrams
Serial number	(varies)	Helps identify production run/version
Electrical info	Volts/amps	Useful for service and troubleshooting

Tips to avoid ordering the wrong part

Once you find the label, we recommend:

• Write the model number exactly as shown (all digits)
• Take a clear photo before the label gets worn or dirty
• Use the model number to match parts like a door gasket, light bulb, or evaporator fan components
• If you are replacing a common item, match by model first, then confirm the part ID

If you already know your model is 25361762012, you can order model-matched parts from the parts list for that model, or search by model number on Sears PartsDirect.

Why it matters

Kenmore model numbers can look similar, but small design changes affect fit for items like door shelves, gaskets, and fan parts. Using the exact model number helps us show the correct diagrams and compatible replacement parts.

For more model identification and location details specific to your refrigerator, check the 25361762012 owner's manual.

Last updated: February 2026

Yes. We still offer replacement parts for Kenmore refrigerators, including model 25361762012. You can order common repair and maintenance parts from the parts list for your exact model, and use Sears PartsDirect to search by model number when you need additional options.

Parts you can commonly still buy for Kenmore 25361762012

Availability varies by part, but these are examples of parts currently listed for this model:

• Refrigerator light bulb 316538904 for interior lighting
• Refrigerator evaporator fan blade 5308000010 to move cold air through the freezer and fresh food section
• Refrigerator defrost bi-metal thermostat 5303918202 to help control defrost heating
• Refrigerator defrost timer 215846604 to cycle the defrost system on many top-mount designs
• Refrigerator door gasket (black) 241872510 to help seal the door and prevent warm air leaks

How we recommend confirming you are ordering the right part

Use your model number (25361762012) and match the part details before you buy.

• Confirm the model number from the rating label inside the refrigerator
• Compare the part name and part ID on the listing to what you are replacing
• Check color and finish notes (for example, black vs white gaskets or handles)
• Review any installation notes in the installation guide
• If you are unsure, compare the old part’s shape, mounting points, and connectors

Quick guide: which parts to shop first

Symptom	Most common part areas to check	Example part listed for this model
No interior light	Lighting	Refrigerator light bulb 316538904
Warm refrigerator, freezer OK	Airflow/evaporator fan	Refrigerator evaporator fan blade 5308000010
Frost buildup, poor cooling	Defrost system	Refrigerator defrost bi-metal thermostat 5303918202
Door not sealing, moisture	Door seal	Refrigerator door gasket (black) 241872510

Why it matters

Kenmore refrigerators are built with serviceable components, so replacing the correct OEM-style part (matched to 25361762012) restores proper cooling, airflow, and door sealing. That prevents temperature swings, frost buildup, and food spoilage.

Last updated: February 2026

Your Kenmore top-mount refrigerator model 25361762012 has its exact capacity (cubic feet) listed on the model and serial rating label and in the specifications section of the owner's manual. That label is the most accurate way to match capacity to your exact configuration.

Where to find the cubic feet on model 25361762012

Check these common locations first:

• Inside the fresh food compartment on a side wall near the crisper drawers
• On the ceiling of the fresh food compartment near the light cover
• Inside the freezer compartment on a side wall
• On a frame edge behind a crisper drawer (you may need to slide the drawer out)

Quick steps to confirm capacity

1. Open the refrigerator door and look for the model and serial label.
2. Look for wording such as “Capacity”, “Total volume”, or separate refrigerator/freezer volume values.
3. Compare what you see to the specifications section in the owner's manual.

What the capacity number usually looks like

Capacity is typically shown as a total cubic feet value, sometimes split into two sections.

How it’s shown	Example format	What it means
Total capacity	“18.2 cu. ft.”	Combined refrigerator + freezer space
Split capacity	“13.2 / 5.0 cu. ft.”	Refrigerator section / freezer section
Liters (less common)	“515 L”	Convert to cu. ft. if needed

Why it matters

Knowing the correct cubic feet helps us match the right shelves, door bins, and airflow parts for your exact layout. It also helps when comparing cooling performance issues (for example, frost buildup that can affect airflow through the damper).

If you are measuring for space planning

For installation clearances (not capacity), the installation guide lists typical spacing guidance such as 3/8 inch at the sides and top and 1 inch at the rear for airflow.

If you also need replacement parts while you are checking specs, you can order parts for model 25361762012 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Most Kenmore refrigerators, including top-mount models like 25361762012, typically last 10 to 15 years. With consistent maintenance (good airflow, clean coils, tight door seals) it’s common to reach the upper end of that range before major sealed-system repairs become more likely.

Typical lifespan and what changes it

A refrigerator’s life is usually determined by how hard the compressor and fans have to work, plus how well the doors seal.

• 10 to 15 years: typical service life for most Kenmore refrigerators
• Longer life: steady temperatures, clean condenser area, doors sealing correctly
• Shorter life: poor ventilation, hot installation location, heavy frost buildup, frequent door openings
• Big cost tipping point: sealed-system work (compressor, refrigerant leaks, filter drier)

Maintenance that adds years (high impact)

Use these habits to reduce wear on the compressor, evaporator fan, and defrost system.

• Keep installation clearances for airflow (commonly 3/8 inch at sides/top and 1 inch at the rear) per the installation guide.
• Avoid placing the refrigerator in heat or extreme room temps; the install guidance notes performance can suffer below 55°F or above 110°F.
• Keep doors closing and sealing fully; a weak gasket forces longer run times.
• Don’t block the toe grille; airflow at the lower front matters for normal operation.
• Level the cabinet so doors self-close and seal; the guide calls for a slight tilt back (about 1/4 inch) so doors close properly.

Repair vs replace: quick decision table

Situation	What it usually means	Typical next step
Dim or no interior light	Simple wear item	Replace a bulb such as refrigerator light bulb 316538904
Warm fridge, freezer OK	Airflow/defrost issue	Check damper, frost pattern, fan operation
Loud fan noise	Fan blade or motor issue	Inspect refrigerator evaporator fan blade 5308000010 and motor
Not cooling at all	Could be start device, controls, or sealed system	Diagnose before buying major parts
Sealed-system leak repair needed	High-cost repair	Compare repair cost to age of unit

Why it matters

Once a refrigerator is past about 10 years, small issues (door seal leaks, airflow restrictions, defrost problems) can quickly increase run time and energy use; that extra load is what shortens compressor life.

If you’re pricing parts for your Kenmore 25361762012, we list model-matched replacements on the parts list for this model, and you can also search by model on Sears PartsDirect.

Last updated: February 2026

The exact exterior dimensions for Kenmore refrigerator model 25361762012 are listed in the product specifications section of the 25361762012 owner's manual. For installation planning, we do know the required minimum clearances and site requirements from the 25361762012 installation guide.

What we can confirm for installation fit

Use these model-specific requirements when planning your opening:

• Clearance at sides and top: 3/8 inch
• Clearance at the rear: 1 inch
• Room temperature range for proper cooling: 55°F to 110°F
• Floor must be level and support a fully loaded refrigerator
• Do not use an extension cord or adapter plug

How to measure your space correctly

Measure the opening before you rely on any “typical” refrigerator size.

• Measure width at the front and back of the opening
• Measure height at left and right sides (floor can slope)
• Measure depth from the back wall to the front edge of counters
• Add space for door swing and handle clearance
• Confirm you can move the unit through doorways; door removal steps are referenced in the guide

Quick reference table

What you need	Where to verify it	Why it matters
Exact height, width, depth	25361762012 owner's manual	Confirms the refrigerator will physically fit
Minimum clearances (3/8 in, 1 in)	25361762012 installation guide	Ensures airflow and space for cords and water line
Leveling and door alignment targets	25361762012 installation guide	Helps doors close and seal correctly

Why it matters

A refrigerator that is tight to the walls or not level can run warmer, cycle longer, and develop door-seal gaps. Following the clearances and leveling guidance helps the compressor cool efficiently and keeps temperatures stable.

If you need replacement parts while you are measuring or moving the unit, you can order from the parts list for model 25361762012 or search by model number on Sears PartsDirect.

Last updated: February 2026