Frigidaire FGTC2349KS1 refrigerator Parts

To reset a Frigidaire FGTC2349KS1 side-by-side refrigerator, we restore power to reboot the electronic controls: unplug the unit (or switch the breaker off), wait about 5 minutes, then power it back on. This clears many control glitches and alarm states.

• Unplug the refrigerator, or turn the circuit breaker OFF.
• Wait about 5 minutes (this lets the control board fully power down).
• Plug it back in, or turn the breaker ON.
• Give the refrigerator time to restart and stabilize temperatures.
• Recheck the display, dispenser, and ice maker operation.

Some “reset” actions are built into the FGTC2349KS1 control panel and are useful when cooling or alarms are the issue:

• Cooling system On/Off: Press and hold the cooling system On/Off button for 3 seconds to turn cooling off; press and hold again for 3 seconds to turn cooling back on.
• Alarm reset: Press and hold the Alarm Reset button for 3 seconds to disable or activate alarms (audible tones and indicator lights).
• Air filter reset: Press and hold the Air Filter button for 3 seconds to reset the air filter status light.
• Water filter reset: After replacing the filter, press and hold the Filter Reset button for 3 seconds until the “Filter OK” light comes on.

For button locations and indicator-light meanings, follow the steps in the FGTC2349KS1 owner's manual.

Using the right reset prevents unnecessary parts replacement and helps you quickly restore normal cooling, ice maker operation, and dispenser performance.

Last updated: January 2026

On a Frigidaire refrigerator, an H1 message means the refrigerator temperature is too warm (a high-temp alarm condition). On model FGTC2349KS1, this typically happens after the doors were left open, power was interrupted, or the unit is still cooling down after being plugged in.

• Confirm both doors are fully closed and sealing; check for packages blocking the door.
• Verify the temperature settings are set for normal use (most households target 37°F fresh food and 0°F freezer).
• Press and hold the Alarm Reset button for about 3 seconds to silence the alarm while temperatures recover.
• Give the refrigerator time to pull down temperature after loading groceries or after a power outage (cooling can take several hours).
• Make sure the refrigerator is plugged into a dedicated, grounded outlet (no extension cord).

If temperatures stay warm even after the doors are closed and settings are correct, a failed cooling-air component is a common next step to investigate.

• Evaporator fan issues can prevent cold air from circulating.
• A stuck damper can limit cold air flow into the fresh food section.
• A sensor (thermistor) problem can cause incorrect temperature readings.

Helpful model-matched parts to consider:

• Refrigerator air damper 5303918899
• Refrigerator temperature sensor 240597220

A high-temp condition can lead to food spoilage and can also signal airflow problems (fan, damper) or a cooling system issue if it does not clear after normal recovery time.

For control and alarm behavior details specific to FGTC2349KS1, use the FGTC2349KS1 owner's manual. You can also reference Frigidaire refrigerator error codes for code meanings and related symptoms.

Last updated: January 2026

A common disadvantage of a side-by-side refrigerator like the Frigidaire FGTC2349KS1 is reduced usable width in both compartments; wide platters, pizza boxes, and large produce trays can be harder to fit and see at a glance compared with a French door layout.

• Narrow shelves: Large trays and wide containers may not fit without rearranging.
• More bending and reaching: Fresh-food items can end up lower, and frozen items can get buried.
• Door swing clearance: You need enough space for both doors to fully open for best access to drawers and baskets.
• Moisture and frost sensitivity: Frequent door openings and humid weather increase interior sweating and frost buildup.
• Door seal dependence: A slightly open door can cause moisture between doors and temperature swings.

We recommend these basics for FGTC2349KS1 performance and day-to-day usability:

• Level the refrigerator and tilt it 1/4 inch front-to-back to help doors close and seal properly.
• Allow installation clearance (typically 3/8 inch at sides/top and 1 inch at the back) for airflow and connections.
• Keep doors closed as much as possible; long openings increase moisture and frost.
• Keep containers covered and wipe moisture promptly to reduce interior sweating.

Most side-by-side complaints trace back to access and airflow: narrow compartments make organization more important, and door openings plus humidity can drive moisture buildup. Proper leveling and clearances help the doors seal, which protects temperature stability and food quality.

For model-specific setup details, use the FGTC2349KS1 installation guide.

Last updated: January 2026