Owner’s manual
Error Codes
What size is Kenmore refrigerator model 79551039011?
Kenmore side-by-side refrigerator model 79551039011 is a full-size side-by-side unit; the exact exterior dimensions (width, height, depth) and capacity are listed in the specifications section of the 79551039011 owner's manual. Use those specs, then confirm with a tape measure in your kitchen for a guaranteed fit.
Most full-size side-by-side refrigerators install in a standard cabinet opening and commonly fall in these ranges (use these for planning only, not as the exact spec for 79551039011):
- Width: about 33 to 36 inches
- Height: about 66 to 71 inches
- Depth: about 30 to 35 inches (depth varies most with handles)
- Capacity: commonly 20 to 27 cu. ft.
Measure both the refrigerator and the opening so hinges, handles, and airflow clearance do not surprise you.
- Check the dimensions/specifications page in the 79551039011 owner's manual
- Measure width at the widest point (often the hinge side)
- Measure height from floor to the top (include hinge cover if present)
- Measure depth two ways: cabinet only and cabinet plus handles
- Confirm you have clearance for ventilation and door swing per the manual
| What to measure | Where to measure | Why it matters |
|---|---|---|
| Opening width | cabinet-to-cabinet at the front | Prevents binding during install |
| Depth clearance | wall to front of handles | Avoids blocking walkways |
| Height clearance | floor to underside of cabinet/soffit | Prevents top contact |
| Door swing | space for doors to open fully | Ensures bins and shelves can be removed |
Correct sizing prevents installation delays and helps the refrigerator cool properly; tight clearances can restrict airflow and increase compressor run time.
A sagging door can change clearances and cause sealing issues.
- Inspect and tighten the refrigerator door hinge 4775JA2113A
- Level the refrigerator front-to-back and side-to-side
- Recheck gasket contact after leveling
Last updated: January 2026
Where is the model number on a Kenmore side by side refrigerator?
On a Kenmore side-by-side refrigerator like model 79551039011, the model number is printed on the appliance identification label, most often inside the fresh food (refrigerator) compartment along the side wall near the door opening. Use the full model number from that label when ordering parts.
We recommend checking these spots in order (use a flashlight and look along the cabinet walls, not the shelves):
- Inside the refrigerator compartment on the left or right side wall near the front frame
- On the ceiling of the refrigerator compartment near the light housing
- Inside the freezer compartment on a side wall near the door opening
- Behind the crisper drawers on the inner cabinet wall
- On the exterior back of the cabinet near the power cord entry (less common)
The label typically includes both a model number and a serial number. For parts lookup and diagrams, the model number is the key.
| Item on the label | What it’s used for | Example format |
|---|---|---|
| Model number | Matching the correct parts list and diagrams | 79551039011 |
| Serial number | Identifying production details for service | Letters and numbers |
Once you find the label, these steps help prevent mismatches:
- Copy the model number exactly, including all digits
- Take a clear photo of the label for reference
- Use the model number when selecting parts like a water inlet valve or dispenser components
- Confirm the part description matches your symptom (leak, no ice, warm temps)
Kenmore model numbers can look similar across different refrigerator series. Using the exact model number from the label ensures we match the correct diagrams and compatible parts for your specific side-by-side configuration.
For more details on identification labels and service information, check the 79551039011 owner's manual.
Last updated: January 2026
Where is the water filter on a Kenmore side by side refrigerator?
On the Kenmore 79551039011 side-by-side refrigerator, the water filter is typically located inside the fresh food (refrigerator) compartment or behind a small access door in the base grille at the bottom front. Use the 79551039011 owner's manual to confirm the exact filter location and removal steps for your configuration.
We most often see the filter in one of these spots:
- Upper-right corner inside the refrigerator compartment
- Upper-left corner inside the refrigerator compartment
- Base grille (kickplate) at the bottom front, behind a flip-down door
- Lower interior area near the crisper drawers (less common)
Use these checks in order; they take less than a minute:
- Look for a round filter housing or a push-button release in the top corners of the refrigerator section
- Check the bottom front grille for a small filter door
- Look for a label that says “Filter” or shows a twist-lock icon
- If your dispenser flow is slow, confirm the filter is fully seated and locked
Most Kenmore side-by-side filters use one of these mechanisms:
| Filter style | What you do | What you’ll notice |
|---|---|---|
| Twist-lock | Turn the filter (usually 1/4 turn) and pull out | A firm stop when it unlocks |
| Push-in / push-button | Press to release, then pull straight out | A click when it releases |
Knowing the exact filter location helps prevent cracked housings, leaks, and poor water flow. It also makes it easier to purge air from the line after replacement so the dispenser runs smoothly.
If you’re troubleshooting low water flow or leaks around the filter area, the refrigerator water filter head ADQ72911006 is one of the key components in the filter circuit for this model.
Last updated: January 2026
