Can I look up Frigidaire parts by model number?
Yes. For your Frigidaire dishwasher model FDPH4316AW0A, you can look up compatible replacement parts by searching the full model number and then choosing parts from the model-specific diagrams and parts list, such as the pc board,main control 5304535629 or crosley dishwasher water inlet valve 5304525044.
How to look up parts by model number (best practice)
- Enter the full model number exactly as shown: FDPH4316AW0A
- Use the model’s parts list and diagrams to match the part’s location and description
- Confirm the part identifier and name before ordering (for example, control board vs. latch)
- If multiple similar parts appear, match by function and where it installs (door, sump, base)
- Order the part that’s listed for your exact model to avoid fit and wiring differences
Common parts customers search by model number
| What’s not working | Part type to check | Example part for FDPH4316AW0A |
|---|---|---|
| Won’t fill | Water inlet valve | Crosley dishwasher water inlet valve 5304525044 |
| Won’t drain | Drain pump | Drain pump a A00126401 |
| Not drying | Heating element | Frigidaire dishwasher heating element 154825001 |
| Door won’t latch | Door latch | Latch assembly,door 5304535641 |
Why it matters
Dishwashers often have look-alike parts that vary by wiring, mounting points, and software revisions. Using the FDPH4316AW0A model number keeps you aligned with the correct Frigidaire-compatible parts and reduces returns and repeat repairs.
If you’re troubleshooting first
If you’re not sure which part failed, we recommend following a step-by-step diagnostic for the symptom before ordering.
- For a unit that won’t start: dishwasher wont start video
- For poor wash performance: dishwasher not cleaning dishes video
- For standing water issues: dishwasher not draining video
Last updated: February 2026
How to find a Frigidaire dishwasher part number?
To find the correct part number for your Frigidaire dishwasher, start by locating your model number (FDPH4316AW0A) on the dishwasher’s rating label, then use that model to match the exact replacement part in the parts list, such as a pump, drain pump, or door latch.
Step 1: Find the model number on the dishwasher
For model FDPH4316AW0A, the model number is printed on the appliance’s rating label. Common places to check:
- Along the inner edge of the door (top or side) when the door is open
- On the tub frame near the door latch area
- On the side of the door itself (visible when opened)
- Occasionally behind the lower toe-kick panel
Step 2: Use the model number to match the part
Once you have FDPH4316AW0A, use it to select the exact part listing for your dishwasher. This prevents ordering a look-alike part that will not fit.
- Match by part name and part ID (best practice)
- Confirm the part’s position in the diagram (if shown)
- Compare your old part’s markings to the listing when possible
- If multiple versions exist, choose the one specifically listed for FDPH4316AW0A
Common parts people look up for this model
Here are examples of part types that are frequently searched for this dishwasher:
| Symptom or need | Part type to look up | Example from this model’s parts |
|---|---|---|
| Not draining | Drain pump | Drain pump a A00126401 |
| Not washing well, loud motor | Pump and motor assembly | Crosley dishwasher pump and motor assembly 5304519906 |
| Door will not latch or start | Door latch | Latch assembly,door 5304535641 |
| Not drying | Heating element | Frigidaire dishwasher heating element 154825001 |
Why it matters
Dishwasher parts are highly model-specific. Using the exact model number FDPH4316AW0A ensures the replacement part fits your Frigidaire dishwasher correctly and restores proper washing, draining, heating, and door safety functions.
Helpful DIY guidance
If you are diagnosing a symptom before ordering a part, use our troubleshooting video: dishwasher common questions.
Last updated: February 2026
What is the most common problem with a Frigidaire dishwasher?
The most common issue we see with Frigidaire dishwashers like model FDPH4316AW0A is poor cleaning (food left on dishes). It’s usually caused by restricted water flow from a dirty filter area, blocked spray paths, or low fill, rather than a major control failure.
Quick checks that fix most “not cleaning” complaints
- Load so spray arms can spin freely; keep tall pans from blocking the upper arm.
- Use fresh detergent and the right cycle; heavy soil often needs a heavier cycle option.
- Run hot water at the sink until it’s hot before starting the dishwasher.
- Clean the sump area and remove debris that can recirculate onto dishes.
- Check for weak wash action; a failing wash motor can sound louder or hum without strong spraying.
When it’s not cleaning, these parts are common suspects
If the basics look good, these model-compatible parts often solve the root cause:
| Symptom you notice | Most likely system | Part to consider |
|---|---|---|
| Weak spray, gritty water, poor cleaning across all racks | Wash circulation | Crosley dishwasher pump and motor assembly 5304519906 |
| Cloudy results that vary by load size; seems to “guess” wrong | Soil sensing | Dishwasher turbidity sensor 154762601 |
| Detergent not dissolving well; poor drying too | Heating | Frigidaire dishwasher heating element 154825001 |
| Low water level, poor wash, sometimes stops early | Fill system | Crosley dishwasher water inlet valve 5304525044 |
Other common Frigidaire dishwasher problems (and what they point to)
- Not draining: check for a clog first; then suspect the drain pump such as drain pump a A00126401.
- Leaks at the front: often loading issues, door alignment, or a worn seal (inspect for tears and gaps).
- Won’t start: door not latching fully; the latch assembly,door 5304535641 is a common fix when the latch feels loose or inconsistent.
Why it matters
Poor cleaning is usually a water movement problem (fill, heat, or circulation). Fixing the underlying cause protects the sump, pump, and control from strain and helps prevent repeat service.
For step-by-step troubleshooting, we recommend dishwasher not cleaning dishes video.
Last updated: February 2026
Can I replace dishwasher parts myself?
Yes, for your Frigidaire FDPH4316AW0A dishwasher, many common repairs are DIY-friendly if you’re comfortable using basic hand tools and you shut off power and water first. Simple mechanical parts (like a door latch or door spring) are usually straightforward; electrical and leak-related repairs take more care.
Good DIY repairs vs. better-for-a-tech repairs
DIY is a great fit when the job is mostly screws, clips, and reassembly. Consider a technician when troubleshooting requires electrical testing, tight leak prevention, or control diagnostics.
- Usually DIY-friendly
- Door not latching: replace the latch assembly,door 5304535641
- Door drops open or won’t stay up: replace the dishwasher door spring 154579101 and inspect the dishwasher door cable 154756401
- Dishwasher not draining (after checking the drain path): replace the drain pump a A00126401
- Often more advanced
- No heat or poor drying: heating circuit checks and element replacement (example: Frigidaire dishwasher heating element 154825001)
- Won’t fill or fills slowly: inlet valve diagnosis (example: crosley dishwasher water inlet valve 5304525044)
- Intermittent power, dead controls, or odd behavior: control diagnosis (example: pc board,main control 5304535629)
Safety checklist before you start
- Turn off the dishwasher breaker (verify the unit is off).
- Shut off the water supply valve under the sink.
- Protect the floor; keep towels ready for residual water.
- Take photos of wire locations and hose routing before removal.
- Use the exact model-matched part for FDPH4316AW0A.
Quick “is this job worth DIY?” table
| Repair type | Typical difficulty | Common risk | Example part |
|---|---|---|---|
| Door hardware | Low | Pinched fingers, misalignment | Latch assembly,door 5304535641 |
| Drain issue | Medium | Water spill, hose routing errors | Drain pump a A00126401 |
| Heating/control | Medium to high | Electrical miswiring, repeat failure | Pc board,main control 5304535629 |
Why it matters
Choosing the right repair level helps prevent leaks, repeat breakdowns, and unnecessary part returns. For performance complaints (not cleaning, not draining, not drying), a quick diagnosis step can save time before you replace parts.
For step-by-step troubleshooting, we recommend starting with dishwasher not draining video or dishwasher not drying dishes video when those symptoms match what you’re seeing.
Last updated: February 2026





