Kenmore Elite 79046373402 electric range Parts

For your Kenmore Elite electric range model 79046373402, the most reliable “reset” is a power reset: turn the oven off, then shut off power at the breaker (or unplug if accessible) for 5 to 10 minutes and restore power. After power returns, reset the clock and any oven functions per the owner's manual.

Quick reset steps (safe, works for most glitches)

• Press STOP/CLEAR to cancel any active cycle and stop beeping.
• Turn all surface knobs to OFF.
• Switch the range circuit OFF at the home breaker for 5 to 10 minutes.
• Restore power; wait 30 to 60 seconds for the control to boot.
• Set the clock, then test Bake and Broil.

If the display is beeping or shows an F-code (F1, F2, F3, F9)

Your manual indicates the control will beep and display an F-code when it detects a fault; start by clearing it, then retest.

What to do

• Press STOP/CLEAR once to clear the display and stop the beeping.
• Perform the power reset above.
• If the same code returns, write it down and focus troubleshooting on common causes like wiring connections, the oven temperature sensor, or the electronic control.

Symptom	What it usually means	Best next step
Random beeping, F-code appears	Control detected a fault	STOP/CLEAR, power reset, then retest
Oven won’t heat but cooktop works	Oven circuit issue (sensor, element, control, wiring)	Check sensor and heating circuit
After outage, settings are wrong	Control needs reprogramming	Reset clock and functions

Parts that commonly relate to “reset” problems

A reset fixes temporary glitches. If the problem comes back, a failing sensor or heating circuit can trigger repeated errors.

• Check the oven temperature sensor connection; consider replacing the frigidaire range oven temperature sensor 316217002 if testing shows it is out of range.
• If the oven light is out (not a control issue), use the correct bulb such as the range oven light bulb 316538904.
• If you see heat damage or loose power connections at the back, the terminal block 5304409888 is a common repair item (power must be off at the breaker before inspection).

Why it matters

Resetting clears software lockups and cancels stuck cycles, but repeated F-codes point to a real electrical or temperature-sensing problem. Addressing the underlying cause prevents no-heat issues, nuisance beeping, and interrupted cooking.

Last updated: February 2026

On Kenmore ranges, an F2 code indicates the electronic oven control has detected a fault condition and stops the current operation while beeping. On Kenmore Elite model 79046373402 (an electric range), start by clearing the code and checking power and the oven temperature sensing circuit.

What to do right away

• Press STOP/CLEAR to stop the beeping and clear the display.
• If the oven was hot, let it cool before touching any internal parts.
• Verify the range power cord is firmly plugged in.
• Check the house breaker; reset it fully if it tripped.
• If the code returns, disconnect power at the breaker before inspecting wiring.

Most common causes on ranges like this

Even though your question says “gas stove,” the 79046373402 is an electric range; the F2 fault is tied to the oven control’s diagnostics and commonly relates to:

• Oven temperature sensor circuit issue (sensor out of range or shorted)
• Loose or heat-damaged wiring/connectors between the sensor and control
• Electronic oven control problem

Model-matched part to consider if testing points to the sensor circuit: frigidaire range oven temperature sensor 316217002.

Quick symptom guide

What you notice	Most likely area	What we do next
F2 during preheat or bake	Sensor circuit	Inspect sensor wiring; test sensor resistance
F2 after a power event	Power supply/control reset	Check breaker and outlet; clear code
F2 returns immediately	Hard fault	Check sensor circuit first, then control

Why it matters

When the control cannot rely on the temperature signal or detects an internal fault, it shuts down heating to prevent unsafe temperature operation. Restoring a stable sensor circuit and power supply brings back normal baking and broiling performance.

For the model’s specific troubleshooting steps and control features, use the owner's manual.

Last updated: February 2026

On the Kenmore Elite electric range model 79046373402, “Hold” (warm/keep warm) is designed to keep cooked food warm at a low, safe serving temperature. On ranges like this, the warm setting is typically around 150°F to 170°F; use the exact steps and any model-specific warm/hold details in the owner's manual.

What “Hold” is used for

“Hold” is meant for short-term warming after cooking, not for cooking food or holding it for hours.

• Keeps food warm while you finish other dishes
• Helps prevent food from cooling too quickly before serving
• Works best with covered casseroles and oven-safe covered dishes
• Not intended for reheating cold food (use Bake or Convection Bake instead)
• Not intended for proofing dough unless your recipe specifically calls for low heat

Typical temperatures you’ll see on this model

Your 79046373402 control system supports low-temperature baking starting at 170°F (and up to 550°F). That low end is a good reference point for what “warm/hold” functions target on many Kenmore and Frigidaire-built ranges.

Function	Typical temperature range	Best for
Warm/hold	150°F to 170°F	Holding cooked food warm briefly
Bake (lowest setpoint)	170°F	Very low-temp warming, drying, some slow warming
Convection bake (lowest setpoint)	300°F	Faster, even baking (not warming)

Quick checks if food is drying out or cooling off

• Use an oven-safe lid or foil to reduce moisture loss.
• Avoid opening the door frequently; heat drops quickly.
• If the oven seems too cool on Hold, try setting Bake to 170°F instead.
• If the oven seems too hot on Hold, move food to a lower rack and cover it.
• If temperatures seem inaccurate, test with a reliable oven thermometer.

Why it matters

Using the correct warm/hold temperature helps keep food pleasant to eat (not dried out or overcooked) while also reducing the chance of temperature swings that can affect texture.

Last updated: February 2026