Craftsman 917374358 lawn mower Parts

For a Craftsman walk-behind mower model 917374358, it’s usually cheaper to repair when the fix is routine maintenance or a single wear part; it’s usually smarter to replace when the repair estimate is about 50% or more of the cost of a comparable new mower, or when the engine or drive system has major damage. See the 917374358 owner’s manual for maintenance and troubleshooting guidance.

Quick decision checklist

• Repair if the mower starts and runs well but has a wear issue (blade, cable, belt, wheel parts).
• Repair if the problem is intermittent and tied to maintenance (stale fuel, dirty air filter, spark plug).
• Replace if the deck is severely rusted/cracked or the handle and controls are unsafe.
• Replace if the engine has low compression, heavy smoking, or internal knocking.
• Replace if the self-propel system needs multiple major parts at once (belt plus transaxle plus cables).

Model-specific examples (917374358)

On this model, common, cost-effective repairs often include replacing the blade or blade mounting parts, or fixing self-propel issues.

Symptom	Often worth repairing?	Typical direction
Poor cut or vibration	Yes	Inspect blade and adapter; replace if bent/worn
Self-propel slows or slips	Often	Check belt/cable adjustment; replace worn drive parts
Won’t start after storage	Yes	Fresh fuel, spark plug, air filter checks
Major engine failure	Usually no	Replacement often makes more sense

Parts that commonly make repair worthwhile

If you’re deciding based on a specific failure, these are common repair items for this model:

• Husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825 (cut quality, vibration)
• Blade adapter 581473301 (blade wobble, stripped hub symptoms)
• Lawn mower drive control cable 583502501 (self-propel engagement issues)

Why it matters

A mower that’s maintained and repaired early typically lasts longer and costs less over time. Waiting until multiple systems fail at once (blade system, drive system, and engine performance) is when replacement becomes the better value.

Last updated: January 2026

On the Craftsman walk-behind mower model 917374358, the most common problems we see are no-start or hard-start conditions, loss of self-propel drive, excessive vibration, and poor cut quality. Many of these trace back to routine wear items and basic maintenance covered in the 917374358 owner’s manual.

Most common issues (and what usually causes them)

• Won’t start / starts then dies: stale fuel, dirty air filter, fouled spark plug, or water in fuel
• Loss of power / runs rough: clogged deck airflow, dirty air filter, incorrect oil level, or old fuel
• Excessive vibration: bent or loose blade, damaged blade adapter, debris packed under the deck
• Uneven cut: blade wear, uneven wheel height settings, buildup under the mower housing
• Self-propel slows or won’t pull: drive control out of adjustment, worn drive belt, debris in drive wheel area

Quick checks we recommend first

1. Disconnect the spark plug wire before inspecting anything under the deck.
2. Verify fresh fuel (used within about 30 days) and the correct oil level.
3. Check for grass and debris buildup under the deck and around the drive wheels.
4. Inspect the blade and blade mounting hardware for looseness or damage.

Parts that commonly solve these symptoms

If vibration or poor cutting is the issue, these model-matched parts are often involved:

Symptom	Part to inspect	Example model-matched part
Excessive vibration	Blade adapter	Blade adapter 581473301
Poor cut / tearing grass	Blade	Husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825

Why it matters

Catching wear early helps prevent bigger failures, like damaged crankshafts from severe vibration or premature drive wear from running with packed debris under the cover.

Last updated: January 2026

On the Craftsman walk-behind mower model 917374358, the model and serial numbers are on a decal on the rear of the mower housing (rear of the deck). For diagrams and identification details, use the 917374358 owner’s manual.

How to find it on this model

Look for a sticker or metalized decal on the back side of the cutting deck, typically:

• Behind the rear wheels, centered or slightly offset
• Near the rear door or rear skirt area
• On the deck surface facing the operator when standing behind the handle
• On the deck surface facing the ground (less common, but possible)

If the label is dirty or faded, wipe it with a damp rag and mild soap; avoid harsh solvents that can remove printing.

Why you need the mower model number (and when you also need the engine number)

For Craftsman 917374358, the mower model number identifies the deck, drive system, and handle components. The engine is a separate system and may have its own model/type code.

• Use the mower model number for deck and drive parts (blade, wheels, cables, chute parts)
• Use the engine model/type code for engine-specific parts (carburetor, ignition, recoil starter)
• Record both the model number and serial number for accurate parts matching

Quick reference

What you’re replacing	Number to use	Where to find it
Deck/drive/handle parts	917374358	Rear of mower housing
Engine parts	Engine model/type code	On the engine shroud/blower housing

Why it matters

Using the correct model number prevents ordering parts that look similar but do not fit your exact deck or self-propelled drive setup.

Last updated: January 2026