Owner’s manual
View engine
How to find Craftsman model number?
On Craftsman walk-behind mowers like model 917376092, the model number is typically printed on a decal on the rear of the mower housing (deck). Once you find it, match that number exactly when ordering parts or using the 917376092 owner's manual.
Where to look on model 917376092
Check these common spots on the mower deck and handle area:
- Rear of the mower housing (most common location)
- Back edge of the deck near the discharge opening
- Near the rear wheels on the deck stamping
- Handle support area where the handle brackets mount
- Under heavy grass buildup; wipe the area clean to reveal the decal
What you should write down
We recommend recording both identifiers so you can get the right Craftsman parts and diagrams.
| Item to record | What it’s used for | Example format |
|---|---|---|
| Model number | Finds the correct parts list and diagrams | 917376092 |
| Serial number | Helps confirm production version and fit | Letters and numbers |
| Purchase date | Helpful for maintenance tracking | Month/day/year |
Quick tips if the decal is hard to read
If the label is faded or dirty, these steps usually help:
- Clean the area with mild soap and water; dry fully
- Use a flashlight at an angle to make embossed printing easier to see
- Take a close-up photo and zoom in to read worn characters
- Copy the number exactly, including dots or dashes if present
Why it matters
Craftsman walk-behind mowers can use different drive parts, wheels, and control cables across similar-looking models. Using the exact model number helps ensure parts like the lawn mower engine control cable 532183567 or husqvarna lawn mower drive control bar 532198453 match your mower’s configuration.
Last updated: February 2026
What are the common problems with Craftsman lawn mowers?
On the Craftsman walk-behind mower model 917376092, the most common problems we see are no-start conditions, loss of power, poor or uneven cutting, excessive vibration, and drive issues (hard to push or self-propel not pulling). The troubleshooting chart in the 917376092 owner's manual points to fuel, ignition, blade, and buildup under the deck as top causes.
Most common symptoms and what usually causes them
- Won’t start: fuel valve OFF, stale gas, dirty air filter, spark plug wire off, bad spark plug, operator presence control bar not held down
- Loss of power: cutting too much grass at once, dirty air filter, grass and debris packed under the deck, oil level too high, walking speed too fast
- Poor cut or uneven cut: worn or bent blade, wheel height set uneven, deck packed with clippings
- Excessive vibration: loose or damaged blade, bent crankshaft (often after hitting a solid object)
- Hard to push or loss of drive: rear of deck dragging in grass, cutting too low in tall grass, drive system wear (gears, wheels, control linkage)
Quick checks we recommend first (fast, low-cost)
- Confirm the fuel valve is ON and you are using fresh gasoline.
- Hold the operator presence control bar firmly to the handle while starting.
- Inspect the blade for damage; replace if bent or badly worn (a damaged blade can also cause vibration).
- Clean packed grass from under the deck (with the spark plug wire disconnected).
- Verify all four wheels are set to the same cutting height.
Parts that commonly wear on walk-behind mowers
| Problem area | What you notice | Example part for this model |
|---|---|---|
| Cutting system | uneven cut, vibration | Husqvarna lawn mower 21-in deck 3-in-1 blade 532189028 |
| Blade mounting | blade feels loose, wobble | Lawn mower blade adapter 532421176 |
| Drive/traction | mower slows, won’t pull | Lawn mower drive pinion gear 532137054 |
Why it matters
Catching these issues early protects the engine and deck. For example, mowing with a bent blade can create severe vibration, and mowing with heavy grass buildup under the deck can reduce airflow and cutting performance.
For step-by-step procedures, safety notes, and the full troubleshooting table, use the 917376092 owner's manual.
Last updated: February 2026
What year is Craftsman Model 917376092 serial number?
The year for a Craftsman walk-behind mower model 917.376092 comes from the date code on the product/serial label, not from the model number alone. Use the label location and identification details in the 917376092 owner's manual to find the tag, then read the date information printed on it.
Where to find the product/serial label
On most Craftsman walk-behind mowers, the identification label is attached to the mower deck or handle mounting area.
Check these common locations:
- Rear of the mower deck above the rear wheels
- Side of the deck near a height adjuster
- Under the rear door near the discharge opening
- Handle bracket area near the deck (less common)
How to decode the year from the code on the tag
Once you find the tag, look for a printed date field or a serial/date code that contains a date.
Common formats you may see:
- MMDDYY (month, day, year)
- YYWW (year, week of year)
- A separate field labeled Date, DOM, or similar
Quick examples (format dependent)
| Code on tag | Format | Year indicated |
|---|---|---|
| 072811 | MMDDYY | 2011 |
| 1128 | YYWW | 2011 |
| 2011-07-28 | Printed date | 2011 |
If the tag is missing or unreadable
You can still narrow things down by documenting what you can see and matching parts by diagram.
Do this:
- Clean the label area gently so characters are readable
- Write down every character (letters and numbers)
- Take a clear photo of the entire tag and the mower deck
- Use the parts diagrams to match key components (for example, the lawn mower engine control cable 532183567)
Why it matters
The production date code helps match the correct parts list for your exact build, which prevents ordering the wrong blade, wheel, drive, or control components for a different production run.
Last updated: February 2026
Where can I get Craftsman replacement parts?
For your Craftsman walk-behind mower model 917376092, we recommend buying replacement parts by shopping with the exact model number so you get the correct fit for your deck, wheels, and drive system; your 917376092 owner's manual also helps you confirm part names and diagrams before ordering.
Best places to buy Craftsman replacement parts
- Sears PartsDirect (model-based lookup for exact-fit parts)
- Craftsman-authorized retailers (in-store or online)
- Major home improvement retailers that carry Craftsman parts
- Reputable small-engine and lawn equipment repair shops (helpful for same-day needs)
- Online parts sellers (use extra care to match the model number and part description)
How to make sure you order the right part
Use these checks before you buy, especially for wear items like blades, blade adapters, and drive parts.
- Match the model number 917376092 exactly
- Use the illustrated parts list in the manual to confirm the part description
- Compare the part’s function and location on the mower (wheel area, deck, drive cover, etc.)
- Replace related fasteners when needed (lock nuts, washers, E-rings)
- For self-propelled issues, confirm whether the part is in the drive system or wheel hardware
Examples of model-matched parts for 917376092
| What you are fixing | Example part to look up | When it is commonly needed |
|---|---|---|
| Blade and cutting performance | 21-in deck 3-in-1 blade 532189028 | Dull blade, bent blade, poor cut quality |
| Blade mounting interface | Lawn mower blade adapter 532421176 | Blade won’t stay tight, wobble, vibration |
| Self-propel drive housing area | Lawn mower drive cover 532437165 | Cover damage, debris intrusion, drive inspection |
Why it matters
Craftsman mowers often share similar-looking parts across different builds, and this model can also include an engine from a separate manufacturer (the manual references a Honda GCV160 engine family). Using the exact model number and the parts diagrams prevents wrong-fit returns and helps your mower run safely.
Last updated: February 2026
