Kenmore 79074139310 gas range Parts

For a Kenmore gas range like model 79074139310, the model number is printed on the identification plate (serial plate). On this model, that plate is located on the right-hand surface of the oven front frame, and you can see it by opening the storage drawer, warmer drawer, or broiler drawer. See the installation guide for the exact location details.

Where to look on Kenmore 79074139310

Check these common spots in this order:

• Open the storage drawer (or warmer/broiler drawer, depending on your range) and look at the right-hand front frame
• Look for a label that lists model, serial, and sometimes a lot number/letter
• If the label is dirty or faded, wipe it gently with a damp cloth and dry it
• Write the model number exactly as shown (for example, 79074139310)

What the identification plate tells you (and why it matters)

Besides the model number, the identification plate typically includes details that help us match the correct Kenmore range parts.

Label item	What it’s used for
Model number	Ensures the correct parts list and diagrams
Serial number	Helps confirm production details for part compatibility
Lot number/letter	Useful when a model has multiple revisions
Fuel type and pressure	Confirms natural gas vs. LP setup and adjustments

Why it matters

Kenmore ranges often have similar-looking designs across multiple model numbers. Using the exact model number from the identification plate helps us match the right parts the first time, such as an oven igniter, oven temperature sensor, spark module, or gas valve.

Last updated: February 2026

A Kenmore gas range like model 79074139310 typically lasts 15 years with normal household use. Consistent cleaning, proper burner flame adjustment, and safe operation habits help you get the full lifespan from key components like igniters, valves, and the oven control.

Typical lifespan and what affects it

Most gas ranges reach their expected service life when heat and ignition parts stay clean and the range is used with good ventilation.

• Keep burner ports and caps clean so flames stay even
• Avoid letting flames extend past the pan edge (excess heat stresses parts)
• Do not use the oven for storage (heat damage and safety risk)
• Use a vent hood or adequate ventilation during long cooking sessions
• Reset all controls to OFF after cooking or timed operations

Quick maintenance checklist (high impact)

Use these habits to reduce wear on ignition and temperature-control parts.

What to do	How often	Why it helps
Wipe spills from cooktop and burner areas	Weekly	Prevents clogged ports and uneven flames
Check burner ignition (spark and light-off)	Monthly	Catches weak ignition before it fails
Confirm oven lights within 60 seconds in Bake	Monthly	Helps spot a weakening igniter early
Keep ventilation working (hood filter clean)	Monthly	Reduces grease buildup and heat stress

When “age” is really a repair issue

If your range is not heating or lighting reliably, the problem is usually a wearable ignition or sensing part, not the age of the appliance.

Common examples for model 79074139310 include:

• Oven will not heat or takes too long to ignite: consider the tappan range oven burner igniter 316489403
• Oven temperature is inaccurate or fluctuates: consider the frigidaire range oven temperature sensor 316490000
• Surface burners click but do not light consistently: ignition components such as the spark module can be involved

Why it matters

A gas range can run for many years, but weak ignition, poor flame adjustment, and grease buildup shorten life by forcing the oven gas valve and ignition system to work harder. Following the safety and operating guidance in the installation guide helps protect both performance and longevity.

Last updated: February 2026

If your Kenmore gas range model 79074139310 is clicking but the oven will not light, the igniter circuit is trying to ignite but the burner is not getting a reliable ignition. The most common causes are a weak oven igniter, a gas supply/valve issue, or a power problem; the oven typically should light within 30 to 60 seconds. See the installation guide for the normal ignition sequence and safety notes.

What “normal” looks like on this model

Per the installation instructions, when you set Bake or Broil:

• Current flows to the igniter and it glows like a light bulb
• After about 30 to 60 seconds, the oven gas valve opens
• The burner lights, then cycles on and off to hold temperature

If you hear clicking but never get ignition, something in that chain is failing.

Quick checks we recommend (safe, no disassembly)

• Confirm power is on; do not try to operate the electric ignition oven during a power failure.
• Wait a full 60 seconds after selecting Bake or Broil before deciding it failed.
• Look for igniter glow through the oven bottom openings (a bright orange glow is typical).
• Check for gas supply issues (other gas appliances working, shutoff valve fully open).
• Reset the control to OFF, then retry Bake at 300°F.

Most likely part-related causes

A clicking sound with no ignition usually points to ignition or gas-valve control problems.

Symptom	What it usually means	Common fix
No igniter glow at all	No power to igniter, failed igniter, wiring issue	Inspect wiring; replace igniter if open
Igniter glows but never lights	Weak igniter not drawing enough current to open valve	Replace igniter
Intermittent lighting	Marginal igniter, loose connection, failing valve	Tighten connections; replace failing part

For this model, common replacements include the tappan range oven burner igniter 316489403 (bake ignition) and the range oven igniter 5304506545 (broil ignition).

Why it matters

A weak igniter can glow but still fail to open the oven gas valve, so the oven will not heat even though the control is calling for heat. Fixing ignition restores reliable preheat and stable baking temperatures.

Last updated: February 2026

For the Kenmore 79074139310 gas range, the most commonly replaced parts are the ignition and temperature-control parts that affect lighting, heating, and baking accuracy, plus a few wear items like burner caps and light bulbs. Start by matching symptoms (no heat, weak flame, uneven baking) to the part category in the owner's manual.

Most common replacement parts (gas range)

• Oven igniters: if the oven will not light, takes a long time to ignite, or only lights sometimes
• Oven temperature sensor: if baking temperatures are consistently off or fluctuate
• Surface burner ignition parts (spark/igniter components): if burners click but do not light reliably
• Burner caps and burner heads: if flames are uneven, lifting, or ports are clogged or damaged
• Spark module: if multiple burners stop sparking or sparking is erratic
• Oven light bulb: if the oven light is out
• Door lock motor/switch assembly (self-clean models): if the door will not lock or unlock properly

Parts on this model that match those “most common” categories

Symptom you see	Part category	Example part for model 79074139310
Oven will not ignite or takes too long	Oven igniter	Tappan range oven burner igniter 316489403
Oven temp seems inaccurate	Temperature sensor	Frigidaire range oven temperature sensor 316490000
Oven light does not work	Light bulb	Appliance light bulb, 40-watt 316538904
Burners do not spark consistently	Spark/ignition control	Range spark module 5304508269
Small burner flame is uneven due to worn cap	Burner cap	Range surface burner cap, 5,000-btu (matte black) 5304508441

Quick checks before you replace a part

• Confirm the range is level; leveling affects cooking results and burner performance (see the installation guide).
• For oven flame issues, check for a proper blue flame; yellow flames often point to an air shutter adjustment need.
• Clean burner ports and caps; food spills commonly cause poor ignition and uneven flames.
• If the oven is not heating, watch for igniter glow and listen for gas ignition; weak igniters are a top cause.
• If you move the range for service, shut off gas and reconnect carefully; then check connections for leaks.

Why it matters

Replacing the right part first saves time and prevents repeat repairs. On gas ranges, ignition and sensing parts (igniters, sensors, spark components) directly control whether the oven lights safely and whether temperatures stay consistent.

Last updated: February 2026

On Kenmore gas range model 79074139310, the model and serial number are printed on the identification plate located on the right-hand surface of the oven front frame. To see it, open the lower drawer area (storage, warmer, or broiler drawer, depending on your range).

Where to look on model 79074139310

The installation guide specifies the identification plate location as:

• Right-hand surface of the oven front frame
• Accessed by opening the lower drawer area
• Visible with the drawer opened (and on some setups, after pulling the drawer out)

Steps to find and record the number

• Turn all burners and the oven off; let the range cool.
• Open the storage drawer, warmer drawer, or broiler drawer.
• Look at the front frame around the oven opening on the right side.
• Write down the model number and serial number exactly as shown.
• Record any lot number or letter listed on the same plate.

Quick reference

Item	What it looks like	Why it matters
Model number	A number like 79074139310	Matches the correct parts diagrams and replacement parts
Serial number	A longer code/number	Helps identify the production run
Lot number/letter	A single letter or short code	Improves parts matching accuracy

Why it matters

Kenmore ranges often have similar-looking designs across multiple model numbers. Using the identification plate info prevents ordering the wrong igniter, sensor, control, or burner parts for your exact 79074139310 configuration.

Last updated: February 2026