Frigidaire LFGF3054TFG frigidaire/gas range Parts

Your Frigidaire gas range model number is printed on the serial plate; on model LFGF3054TFG, you’ll typically find it by opening the lower oven drawer or the storage drawer and looking for the rating label. Use that exact model number when ordering parts or checking instructions in the LFGF3054TFG owner’s manual.

Check these common locations on Frigidaire ranges:

• Open the lower oven drawer (on some models) and look along the frame area
• Open the storage drawer (on some models) and look for the serial plate/label
• Use a flashlight and look for a label with MODEL and SERIAL fields
• Write the number exactly as shown (letters and numbers)

The model number is usually a short string of letters and numbers (for example, LFGF3054TFG). We use it to match the correct Frigidaire parts list, diagrams, and compatible replacements.

• Match every character exactly (watch for similar-looking characters like 0 and O)
• Use the model number when selecting ignition and oven parts such as the bake igniter 316489403
• If the label is dirty, wipe gently with a damp cloth and dry it before reading

Frigidaire ranges can look similar across model families, but burner, igniter, control board, and oven components can vary by model. Using the correct model number helps ensure the part fits and the repair steps match your appliance.

Last updated: February 2026

If your Frigidaire LFGF3054TFG gas range smells like gas, treat it as a safety issue first: follow the “what to do if you smell gas” steps in the LFGF3054TFG installation guide, then address common causes like a burner that is not lighting cleanly or an oven igniter that is not opening the gas valve fully.

• Turn all burner and oven controls to OFF.
• Do not try to light any appliance.
• Do not touch electrical switches or use a phone inside the home.
• Call your gas supplier from a neighbor’s phone and follow their instructions.
• If you cannot reach your gas supplier, call the fire department.

A brief, faint odor at initial ignition can happen, but a persistent smell usually points to incomplete ignition or a component problem.

• Surface burner not igniting fully: clogged burner ports, wet/dirty burner head, or a weak igniter spark.
• Oven bake burner ignition issue: a weak bake igniter can delay ignition so gas flows longer before lighting.
• Broil ignition issue: similar delayed ignition symptoms on broil.
• Incorrect flame: flames lifting off ports or very yellow flames can indicate an air-to-gas mix problem.

These are common repair parts for ignition-related gas odors on LFGF3054TFG:

A gas odor can signal unburned gas or improper combustion. Fixing ignition and flame issues helps your range heat correctly, reduces nuisance odors, and keeps operation safe.

Last updated: February 2026

A Frigidaire gas range like model LFGF3054TFG typically lasts 15 years with normal household use and basic maintenance. Keeping burners clean, ensuring proper gas flow, and addressing ignition or temperature issues early helps you reach that expected service life.

• Heat and grease buildup on burners and in the oven cavity
• Ignition wear (surface igniters, bake igniter, broil igniter)
• Temperature control accuracy (sensor and control board performance)
• Door seal condition (heat loss makes components work harder)
• Installation quality (correct gas pressure and regulator setup)

• Clean burner caps and ports; make sure flames are steady and mostly blue.
• Wipe spills promptly to prevent baked-on residue and corrosion.
• Check the oven door closes tightly; replace a worn seal if heat leaks.
• If the oven struggles to heat, inspect common wear parts like the bake igniter 316489403.
• Follow cleaning and care steps in the owner's manual.

A range that is struggling to ignite or hold temperature uses more time and fuel, and it puts extra stress on the gas valve, igniters, and electronic controls. Routine cleaning and timely part replacement usually cost far less than replacing the entire range.

Last updated: March 2026