Kenmore 79096129409 electric range Parts

On Kenmore electric range model 79096129409, the model and serial number are printed on the identification (serial) plate located on the right side of the oven front frame inside the storage or warmer drawer compartment. Use the location diagram in the 79096129409 owner's manual to spot it quickly.

Where to look on the range

1. Pull out the storage drawer or warmer drawer (depending on your version).
2. Look inside the drawer opening at the right side of the oven front frame.
3. Find the serial plate and record both the model and serial numbers.

Common places customers check first (and miss)

• Behind the oven door frame (door jamb area)
• On the back panel near the vent
• On the lower back panel near the power cord
• Under the cooktop edge

What the label looks like

The plate typically includes:

• Model number (starts with 790. on many Kenmore ranges)
• Serial number
• Electrical ratings (volts/amps)

Item on plate	Why you need it
Model number	Ensures you get the correct Kenmore range parts and diagrams
Serial number	Helps match production details when ordering certain parts
Electrical rating	Useful when checking power supply or terminal block connections

Why it matters

We use the exact model number to match the correct parts list for your range, including items like the range oven temperature sensor 316490000 and the correct surface element controls. That prevents ordering a part that fits a similar looking Kenmore range but not your specific build.

Last updated: February 2026

If your Kenmore electric range model 79096129409 is not working, start by confirming it has power and the controls are set correctly. Many “dead oven” problems come from a tripped breaker, a loose power cord connection, or an electronic control fault that can be cleared and rechecked using the steps in the 79096129409 owner's manual.

Quick checks we recommend first

• Check the house breaker; ranges often use a 2-pole breaker that can trip on one side.
• Confirm the power cord is fully seated and the outlet is supplying power.
• If the display is beeping or shows an F-code, press STOP/CLEAR to stop the beeping and clear the display.
• Try BAKE and BROIL separately to see if one heating mode still works.
• If the range was in a power outage, turn all knobs off; once power returns, reset the clock and oven function.

What the symptoms usually point to

Symptom	Most likely area to check	What to do next
Entire range does not operate	Power supply, cord, terminal connections	Verify breaker, outlet, and wiring connections per the 79096129409 installation guide.
Control beeps and shows an F code	Electronic oven control detected a fault	Clear with STOP/CLEAR; if it returns, troubleshoot the code family.
Oven will not heat but cooktop works	Oven heating circuit (sensor, elements, control)	Test components in the heating circuit; start with the sensor.

Parts that commonly fix “oven won’t heat”

If the cooktop works but the oven will not heat, these model-matched parts are common suspects:

• Frigidaire range oven temperature sensor 316490000 (sensor out of range can prevent proper heating)
• Frigidaire range broil element 316203301 (broil not heating can affect some bake performance checks)
• Element 316407501 (failed bake element can stop baking)

Why it matters

An electric oven needs full 240V power and a working heating circuit to heat correctly. A partial power loss (one breaker leg tripped) can leave lights or the cooktop working while the oven will not heat, which makes power checks the fastest first step.

Last updated: February 2026

A Kenmore electric range like model 79096129409 typically lasts 13 to 15 years with normal household use and basic maintenance. Keeping the oven temperature accurate, door seal tight, and electrical connections secure helps you reach that lifespan.

What affects lifespan most

• Heat stress from frequent high-temperature baking and broiling
• Power quality (surges and loose connections can damage controls)
• Door seal condition (heat loss makes components work harder)
• Sensor accuracy (overheating can shorten element and control life)
• Cleaning habits (spills and harsh chemicals can damage finishes and wiring)

Maintenance that extends life

Use these habits to reduce wear on common range parts like elements, switches, and wiring:

• Keep the oven cavity and vent area clear of heavy grease buildup
• Avoid slamming the oven door; it stresses hinges and the door seal
• If baking temps seem off, test and replace the sensor if needed
• Replace burned-out bulbs promptly so you can spot spills early
• Periodically check for loose power-cord connections at the terminal block (power off)

Common “end-of-life” symptoms and likely causes

Symptom	Most common cause	Typical fix
Oven won’t hold temperature	Sensor drift	Replace frigidaire range oven temperature sensor 316490000
Heat leaking around door	Worn gasket	Replace frigidaire range oven door seal 316405000
Surface element won’t regulate	Failed infinite switch	Replace frigidaire range surface element control switch 316436001
No oven light	Bulb or socket issue	Replace range oven light bulb 316538904 or socket

Why it matters

A range that is heating inaccurately or leaking heat often uses more electricity and can cook unevenly. Addressing small issues early (sensor, door seal, switch) usually costs far less than replacing the entire appliance.

For model-specific operating and care details (including cleaning guidance and feature use), follow the owner's manual.

Last updated: March 2026