Owner’s manual
Error Codes
How to reset a Bosch ice maker?
For a Bosch B26FT80SNS refrigerator, the most reliable “reset” is a power reset: turn the unit off at the breaker or unplug it for 5 minutes, then restore power and allow up to 24 hours for ice production to normalize. Use the steps in the B26FT80SNS owner's manual for your exact control layout.
Quick reset steps (safe and effective)
- Confirm the ice maker is turned ON in the control settings.
- Unplug the refrigerator (or switch the circuit breaker off) for 5 minutes.
- Restore power and wait 2 to 4 hours for the ice maker to cycle.
- Dump the first full bin of ice after a reset or water system work (helps clear stale cubes).
- If you recently changed the filter, dispense water for several minutes to purge air.
If it still will not make ice
These checks solve most “no ice” complaints after a reset:
- Make sure the household water shutoff valve is fully open.
- Check for a kinked water line behind the refrigerator.
- Look for ice blocking the fill tube or ice clumps jamming the bin.
- Verify freezer temperature is near 0°F (ice makers struggle above about 10°F).
- If water flow is weak, replace the filter using refrigerator water filter 11034152.
What to expect after a reset
| What you do | What should happen | Typical wait |
|---|---|---|
| Power reset | Controls reboot; ice maker restarts its cycle | 2 to 4 hours |
| Filter change + purge | Air clears; water flow stabilizes | 3 to 10 minutes |
| Temperature correction | Ice production returns gradually | 12 to 24 hours |
Why it matters
A reset clears minor control glitches, but ice makers still need steady water pressure, good airflow, and proper freezer temperature. If the freezer is warm or water flow is restricted, resetting alone will not restore ice production.
Related DIY help
Last updated: February 2026
What is the most common problem with a Bosch fridge freezer?
The most common Bosch fridge-freezer problem is a cooling complaint: the refrigerator section runs warm while the freezer seems OK (or temperatures swing). On the Bosch B26FT80SNS, this is usually caused by restricted airflow, frost buildup from a defrost issue, or a failing evaporator fan.
Quick checks we recommend first
- Make sure food packages are not blocking air vents between compartments.
- Confirm the doors close fully and the gaskets seal all the way around.
- Set temperatures to typical targets: 37°F for fresh food and 0°F for freezer.
- Clean condenser coils and verify the condenser fan area is clear of dust.
- Listen for the evaporator fan running when the compressor is on.
What commonly fails when cooling is uneven
If basic airflow and settings look good, these parts are frequent culprits:
| Symptom | Most likely cause | What to look for |
|---|---|---|
| Fridge warm, freezer cold | Evaporator fan problem | Weak/no fan sound, poor airflow at vents |
| Heavy frost on back freezer panel | Defrost system problem | Frost blanket, fan hitting ice |
| Slow/no water flow, ice maker issues | Water filter restriction | Flow improves after filter change |
Model-relevant parts that often solve these issues:
- Refrigerator evaporator fan motor 00618893
- Refrigerator defrost sensor 00618543
- Bosch refrigerator water filter 11034152
Why it matters
Cooling problems usually start as airflow restrictions and quickly turn into food-safety and ice buildup issues. Catching a weak fan, a defrost fault, or a clogged filter early helps prevent temperature swings and repeat frosting.
Helpful DIY resources
- B26FT80SNS manual
- How to replace the water filter in a Bosch refrigerator
- How to fix your evaporator cooling fan
Last updated: February 2026
Why would your ice maker not be working in a Bosch refrigerator?
In a Bosch refrigerator like model B26FT80SNS, an ice maker usually stops working because water is not reaching the ice maker, the freezer is not cold enough, or the ice maker is not cycling due to a control or wiring issue. Use the B26FT80SNS manual to confirm the correct settings and reset steps.
Quick checks we recommend first
- Make sure the ice maker is turned on (some models have an on/off switch or arm).
- Confirm the freezer is holding about 0°F; warmer temps can stop ice production.
- Verify the household water supply valve is fully open.
- Check for a kinked, pinched, or frozen water line.
- Dump old or clumped ice; a jam can prevent cycling.
- After any water work, purge air and wait 24 hours for normal ice production.
Most common causes (and what to do)
| Symptom | Likely cause | What to do next |
|---|---|---|
| No ice, no fill sound | No water supply to refrigerator | Check shutoff valve, line kinks, and inlet screen restrictions |
| Small cubes or slow production | Restricted flow | Replace the refrigerator water filter 11034152 and purge air |
| No ice, water dispenser also weak | Inlet valve not opening fully | Diagnose and replace the Bosch refrigerator water inlet valve 00649626 if it fails tests |
| Ice maker has power but won’t cycle | Ice maker module, wiring, or temperature issue | Check harness connections; confirm freezer temp and door seals |
Parts that commonly fix Bosch ice maker water issues
- Refrigerator water filter 11034152: clogged filter reduces flow to the ice maker.
- Bosch refrigerator water inlet valve 00649626: failed valve can stop water from filling the mold.
Why it matters
An ice maker depends on steady water pressure and proper freezer temperature. Fixing a restricted filter or a weak inlet valve restores fill volume, prevents hollow cubes, and helps avoid repeated ice maker jams.
Last updated: February 2026
