Kenmore 25360089417 refrigerator Parts

On the Kenmore 25360089417 top-mount refrigerator, the upper section is the freezer compartment. It’s the colder compartment designed to keep foods frozen, and on many top-mount models it also houses the ice maker and freezer airflow controls (when equipped). See the 25360089417 owner's manual for your exact compartment features.

• Freezer shelf or shelves for frozen food storage
• Cold-air outlets that help circulate air to the fresh-food section below
• Ice maker area (some models) with an ice bin and shutoff arm
• Freezer temperature control or an air damper control (varies by design)

Knowing the correct name helps when you’re ordering parts, reading troubleshooting steps, or following care instructions. For example, ice maker instructions and freezer airflow guidance are always tied to the freezer compartment, not the fresh-food section.

• Keep vents clear; blocking upper rear vents in the refrigerator section can reduce cooling efficiency.
• If your unit has an ice maker, use the wire signal arm to turn it ON/OFF as described in the manual.
• For door alignment and clearance needs (especially near a wall), follow the spacing guidance in the manual.

Last updated: January 2026

For Kenmore model 25360089417, the model number alone usually does not state the exact cubic-foot capacity; the most reliable way is to look up the capacity in the owner's manual or the model specifications, then use interior measurements only as a backup estimate.

• Check the Use & Care Guide for your model series; it lists model families and operating details and is the best place to confirm specs for your refrigerator. See the owner's manual.
• Look for a rating plate/serial plate inside the fresh food compartment; the manual notes the model and serial information is located inside the refrigerator compartment.
• If you have a product spec label or sales receipt, it often lists capacity in cu ft.

If you cannot find the listed capacity, we estimate interior volume like this:

1. Empty the compartment enough to measure.
2. Measure the usable interior (not the outside cabinet): width, depth, height in inches.
3. Multiply: W x D x H to get cubic inches.
4. Divide by 1728 to convert to cubic feet.

Kenmore model numbers (including many 253 prefix refrigerators) identify the product line and configuration, but capacity can vary within a series due to insulation thickness, ice maker options, and interior layout changes. That is why the manual/spec listing is the best match for 25360089417.

If you are trying to match parts by size or configuration (shelves, door bins, gaskets), use the model number 25360089417 and confirm details in the installation guide before ordering.

Last updated: January 2026

Yes. For Kenmore model 25360089417, the most reliable reset is a power reset: turn the temperature control to “0” (mechanical) or “OFF” (electronic), unplug the refrigerator, wait about 5 minutes, then plug it back in and allow up to 15 minutes for the self-test to finish (and 8 to 12 hours to fully cool). See the 25360089417 owner's manual for the exact control style and steps.

• Power reset (recommended): unplug for ~5 minutes, then restore power.
• Control OFF reset: set control to “0” or “OFF”, remove power, then restart.
• Door alarm reset (if the issue is beeping): close the fresh food door; if needed, press and release the fresh food door switch to reset the alarm and light.
• After a reset: keep doors closed and wait for temperatures to stabilize.

1. Move food that could spoil quickly to a cooler if needed.
2. Turn the temperature control to “0” or “OFF.”
3. Unplug the power cord from the wall outlet.
4. Wait 5 minutes.
5. Plug back in and set normal temperatures.
6. Let the refrigerator run; allow 15 minutes for the self diagnostic, then several hours for full cooling.

A reset clears a temporary control glitch and restarts the normal cooling and defrost logic. If the refrigerator is actually losing cold air (door seal) or not moving air (fan), a reset will not correct the root cause.

Last updated: January 2026

For Kenmore top-mount refrigerator model 25360089417, the correct water filter is the one specified for your exact model and water hookup; we match it by model number because Kenmore refrigerators can use different filter styles even within the 253 series. Confirm the filter location and replacement steps in the 25360089417 owner's manual.

Use these quick checks before ordering:

• Look for a filter housing inside the fresh food compartment (often upper right) or an inline filter behind the refrigerator.
• If you do not see a cartridge inside the refrigerator, your unit may use an inline filter on the water line.
• Match by model number 25360089417 first, then confirm by the filter’s shape and how it locks in.
• If your refrigerator has an ice maker or water dispenser, it still may use an inline filter depending on the installation.
• If you recently moved or replaced the water line, confirm the filter type again.

Your installation requirements matter because some setups filter water at the refrigerator and others filter it inline.

For the full water supply connection requirements, use the 25360089417 installation guide.

Using the correct refrigerator water filter protects the water inlet valve and ice maker from sediment, helps prevent off-tastes and odors, and avoids leaks caused by a mismatched cartridge or incorrect fittings.

If you confirm your refrigerator uses a replaceable water filter, follow the steps in how to replace the water filter in a Kenmore refrigerator to remove the old filter, install the new one, and flush the system.

Last updated: January 2026