Kenmore 10653532300 refrigerator Parts

Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide. For Kenmore model 10653532300, the exact cabinet width is listed in the 10653532300 owner's manual; use that measurement (not the door-to-door span) when planning a fit.

Side-by-side refrigerators commonly fall into these width bands:

• 32 to 33 inches: narrower, smaller-capacity models
• 35 to 36 inches: most full-size side-by-sides
• 36+ inches: larger or specialty configurations

To avoid clearance surprises, measure in two ways:

• Cabinet width: the refrigerator body (most important for the opening)
• Door-to-door width: can be wider with handles and door swing
• Opening width: inside edge to inside edge of the cabinet cutout
• Clearance space: room for airflow and door swing

The installation guidance for this style of refrigerator calls for ventilation space and extra room near walls for door swing; confirm the clearances for your kitchen using the 10653532300 installation guide.

A side-by-side that is even 1 inch too wide (or too tight against a wall) can cause poor ventilation, doors that do not open fully, and harder access to shelves and bins.

Last updated: January 2026

The most common issues we see with the Kenmore 10653532300 side-by-side refrigerator involve weak or no ice and water dispensing, warm temperatures from airflow or defrost problems, and door sealing or closing issues. Your owner's manual covers normal operation checks and settings that help narrow the cause.

• Ice maker not making ice: water supply problem, failed inlet valve, or ice maker failure
• Water dispenser slow or not dispensing: restricted filter/housing, frozen water tube, or inlet valve issue
• Refrigerator warm but freezer cold (or vice versa): evaporator fan airflow problem, frost buildup from a defrost failure
• Frost on back wall of freezer: defrost heater or defrost bi-metal not working
• Door not closing smoothly or popping open: worn door cam or misalignment
• Leaks or puddles: cracked water tube, loose fittings, or defrost drain issue

1. Confirm temperatures: 0°F in the freezer and 37°F in the fresh food section.
2. Make sure vents are not blocked by food packages.
3. If ice and water are both weak, verify the household shutoff valve is fully open.
4. Look for frost buildup on the freezer back panel (a strong clue of a defrost problem).
5. Inspect door gaskets for gaps and check that doors close without resistance.

Catching airflow, defrost, and water-supply problems early prevents food spoilage, reduces ice buildup, and helps protect major components like the compressor.

Last updated: March 2026

For your Kenmore side-by-side refrigerator, the model number is printed on the appliance’s rating label, not on the doors or shelves. On model 10653532300, we use that label information to match the correct diagrams, parts, and manuals for your exact unit; see the owner's manual for label locations and identification details.

Check these common rating-label spots first:

• Inside the fresh food (refrigerator) compartment on a side wall near the crisper drawers
• On the ceiling of the fresh food compartment near the light housing
• Along the door frame (hinge side) when you open the refrigerator door
• Inside the freezer compartment on a side wall (less common)
• Behind the toe grille (kick plate) at the bottom front (occasionally)

Record the full identification from the label:

• Model number (example format: 106.53532300; it may appear with or without the dot)
• Serial number (helps date the unit and confirm production run)
• Electrical ratings (volts/amps) if you are troubleshooting cooling or compressor issues

Kenmore model numbers that start with 106 identify a specific design family; small differences between close model numbers can change parts like the ice maker, water inlet valve, or door components. Using the exact label model number prevents ordering the wrong replacement part.

Last updated: March 2026