Kenmore 2535808289A side-by-side refrigerator Parts

Your Kenmore side-by-side refrigerator model 2535808289A has a specific cubic-foot capacity set by its design, but the most reliable way to get the exact number is to read the refrigerator’s rating plate (usually inside the fresh food compartment on a side wall or ceiling area). That label lists the official capacity in cubic feet.

Fast ways to find the exact cubic feet for model 2535808289A

Use these checks in order; the first one is the most accurate.

• Check the rating plate inside the refrigerator section (often near the crisper area or upper side wall). Look for “Capacity” or “Total volume.”
• Look for a tech/rating label behind the toe grille or on an interior liner panel (some designs place additional data there).
• Measure and estimate only if the label is missing (helpful for planning, not for exact specs).
• If you are troubleshooting weak cooling or airflow while you are inside the cabinet, inspect the evaporator fan area; a damaged fan blade can reduce performance (see refrigerator evaporator fan blade 5308000010).

Quick capacity estimate (when the label is missing)

If you need a planning number (for moving, kitchen fit, or food storage), we use a simple volume estimate:

• Measure interior width x interior height x interior depth of the fresh food and freezer compartments.
• Multiply to get cubic inches, then convert to cubic feet.

What you have	What to do	Conversion
Interior measurements (inches)	Multiply W x H x D	Cubic inches
Cubic inches	Divide by 1,728	Cubic feet

Why it matters

Cubic-foot capacity helps you compare storage space, but it does not tell the whole story. Shelf layout, ice maker space, and airflow channels can reduce usable room, so the rating plate value is the best “official” number for your exact 2535808289A configuration.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 2535808289A are cooling problems, ice maker and water dispenser failures, leaks, unusual noise, and frost buildup. These symptoms usually trace back to airflow, defrost, or water-supply components that can be tested and replaced.

Common problems and what to check first

• Not cooling or warm temperatures: confirm vents are not blocked; listen for the evaporator fan.
• Ice maker not making ice: verify the freezer is cold enough; check for a frozen fill tube or low water flow.
• Water dispenser slow or not dispensing: replace the water filter; purge air from the line.
• Water leaking: inspect the water line connections; check for a clogged defrost drain.
• Noisy operation: look for ice hitting the fan blade; check for a failing fan motor.
• Frost buildup on the back wall: suspect a defrost system problem.

Parts that commonly solve these symptoms (when they match your diagnosis)

If your troubleshooting points to a specific component, these are common replacements available for this model:

• Water quality and flow issues: genuine Kenmore refrigerator water filter WFCB
• Frost buildup or defrost failures: crosley refrigerator defrost timer 215846602
• Fan noise or poor airflow: refrigerator evaporator fan blade 5308000010
• Ice production problems: refrigerator ice maker assembly 5303918277

Quick symptom-to-likely-cause guide

Symptom	Most likely area	What we do first
Fridge warm, freezer OK	Airflow from freezer	Check evaporator fan and vents
Freezer warm too	Sealed system or compressor start	Check condenser cleanliness, listen for compressor
No ice, dispenser works	Ice maker or freezer temp	Confirm temp, then test ice maker
Slow water	Filter or supply	Replace filter, verify shutoff valve fully open
Frost on back panel	Defrost system	Check timer/heater/defrost drain

DIY help that matches these problems

• For water filter selection and replacement steps, use how to replace the water filter in a Kenmore refrigerator.
• For dispenser access and common dispenser issues, use how to disassemble a Kenmore refrigerator dispenser.
• For recurring ice and water issues, use how to prevent water dispenser and ice maker problems.

Why it matters

Cooling, defrost, and water-delivery problems can cascade. For example, frost buildup restricts airflow and makes the refrigerator run longer, while a clogged filter can reduce dispenser flow and also starve the ice maker.

Last updated: February 2026

Kenmore model numbers use a prefix system: the first three digits identify the manufacturer that built the appliance for Kenmore, and the remaining numbers and letters identify the base design and specific version. Your refrigerator model 2535808289A starts with 253, a common Frigidaire-built Kenmore prefix.

How to read a Kenmore model number

Most Kenmore model numbers follow this structure:

• First 3 digits (prefix): manufacturer code (who built it for Kenmore)
• Middle digits: base model series
• Ending digits/letters: revision, feature set, or engineering change

Common Kenmore prefixes (examples)

These prefixes help us match the correct parts diagrams and compatible components.

Prefix	Common builder	Often seen on
253	Frigidaire/Electrolux family	Refrigerators (including many side-by-sides)
795	LG	Refrigerators (many bottom-freezer styles)
790	Frigidaire	Ranges (commonly)

Why the prefix matters for parts and troubleshooting

The prefix helps narrow down the correct parts list faster, especially for systems like the ice maker, dispenser, and cooling airflow on a Kenmore side-by-side refrigerator.

• Use the full model number from the rating label, including any ending letters
• Match parts by model number first, not by appearance
• For water and ice symptoms, start with the filter and dispenser path

Example parts you might match by model

These are common fitment checkpoints for model 2535808289A:

• Genuine Kenmore refrigerator water filter WFCB
• Refrigerator ice maker assembly 5303918277
• Refrigerator evaporator fan blade 5308000010

Helpful guide

For tips on locating the rating label and confirming the full model number before ordering parts, use: how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

On a Kenmore side-by-side refrigerator like model 2535808289A, the model number is printed on the appliance identification label (the same label that lists the serial number). You will typically find this label inside the fresh food compartment along the side wall or near the ceiling.

Most common label locations to check

Look for a white or silver sticker or plate with MODEL and SERIAL fields. Check these spots in order:

• Inside the refrigerator compartment on the left or right side wall (near the front)
• Inside the refrigerator compartment near the top (ceiling area)
• On the door frame (hinge side) when you open the refrigerator door
• Behind the crisper drawers on the side wall (less common)
• On the back exterior panel (least common)

What the label looks like (what to copy)

When you find the label, copy these items exactly:

What to record	Example format	Why it matters
Model number	2535808289A	Ensures parts diagrams match your exact build
Serial number	Letters plus numbers	Helps confirm production series and compatible revisions
Electrical rating	Volts/amps	Useful for diagnosing compressor, fan, and defrost issues

Why it matters

Kenmore refrigerators can have similar-looking cabinets across multiple model numbers. Using the exact model number (and often the serial number) prevents ordering the wrong ice maker, water filter, or dispenser parts.

Parts you can match once you have the model number

After you confirm the model number, you can quickly narrow down common replacements for 2535808289A, such as:

• Genuine Kenmore refrigerator water filter WFCB (water taste, slow dispensing, low ice production)
• Refrigerator ice maker assembly 5303918277 (no ice, small cubes, intermittent harvest)
• Refrigerator evaporator fan blade 5308000010 (warm fridge, noisy fan, weak airflow)

Last updated: February 2026