Kenmore Elite 72196047610 electric range Parts

To reset your Kenmore Elite electric range model 72196047610, we recommend doing a simple power reset first; it clears many control glitches without changing your saved settings. For keypad and settings behavior specific to your range, follow the steps in the 72196047610 owner's manual.

Quick reset options (start here)

• Power reset (most common): Turn the range off at the household breaker for 1 minute, then restore power.
• Cancel an active function: Press CANCEL/CLEAR to stop a cooking cycle or clear an entry.
• Clear a running timer: Press UPPER TIMER ON/OFF or LOWER TIMER ON/OFF once to cancel the timer and return to the time of day.
• Restore normal operation after a setting change: Press START to accept the change, or CANCEL/CLEAR to back out.

If the issue is inaccurate oven temperature (not a reset)

If your goal is to “reset” because baking temperatures seem off, use the built-in temperature calibration instead of repeatedly power-cycling.

How to adjust calibration

• Press SETTINGS until “L-AJ” (lower oven) or “U-AJ” (upper oven) appears.
• Enter the number of degrees to adjust.
• Toggle + / - using SETTINGS.
• Press START to save.

Calibration limits and what it affects

Item	What to expect
Adjustment range	Up to ±35°F (±19°C)
Affects	Bake and convection temperature accuracy
Does not affect	Broil and Self Clean temperatures
After power loss	Adjustment is retained in memory

When a “reset” points to a part problem

If the oven still will not heat, overheats, or throws temperature-related errors after a power reset, a failed sensor is a common cause. For this model, the Range oven temperature sensor is a frequent diagnostic starting point: range oven temperature sensor EBG61305805.

Why it matters

A reset clears temporary control logic issues, but it will not fix a bad temperature signal, failed heating circuit, or wiring problem. Using the correct reset or calibration step helps you avoid unnecessary parts replacement and gets the oven back to stable temperatures faster.

Last updated: February 2026

For the Kenmore Elite electric range model 72196047610, the exact cabinet cutout and appliance dimensions are listed in the “Dimensions and Clearances” section of the installation guide. Use those measurements to confirm fit, required clearances, and anti-tip bracket placement before moving the range.

Where to find the correct dimensions for 72196047610

We use the installation specifications because they include the full footprint plus required safety clearances.

• Open the installation guide for model 72196047610
• Go to “Preparing for Installation”
• Find “Dimensions and Clearances”
• Note the width, height, and depth plus any rear and side clearance requirements
• Confirm whether measurements include the handle and rear trim/vent area

Quick measurement checklist (what to measure at home)

Measure your space first, then compare to the installation specs.

• Opening width (counter to counter)
• Counter height to floor (check left and right)
• Depth to the back wall (watch baseboards)
• Clearance to cabinets above the cooktop
• Space behind the range for the cord and strain relief

Typical range sizing (for context)

Most freestanding electric ranges in this class are built around a standard footprint; the installation guide gives the exact numbers for your unit.

Spec you care about	What it affects	Why you should use the install specs
Width	Fits between cabinets	Confirms true body width and side clearances
Height	Sits flush with countertop	Accounts for leveling legs adjustment
Depth	Door swing and walkway	Helps avoid handle or door interference

Why it matters

Correct dimensions prevent installation problems like a range that will not slide in fully, a door that hits an island, or unsafe clearances that can overheat cabinets. The installation guide also ties dimensions to the anti-tip device requirements.

If you need replacement parts while you are measuring or reinstalling, you can order model-specific parts from the list for 72196047610, or search by model on Sears PartsDirect.

Last updated: February 2026

For your Kenmore Elite electric range model 72196047610, the model number is on the appliance’s rating label; the most common spots are the oven door frame (door jamb) when you open the door, or behind the lower storage or warming drawer. We also list the model as 721.9604* in the owner's manual.

Common places to check on a range

• Open the oven door and check the frame around the opening (door jamb)
• Pull out the bottom drawer and look on the frame behind it
• Check the back panel near the power cord entry area
• Look along the side panel edge (especially near the lower rear)
• If your range has a warming drawer, check the frame behind that drawer

What the model number can look like

On Kenmore Elite ranges, you may see the full model number or a shortened series format.

Where you see it	Example you might find	What it means
Parts list and model page	72196047610	Full model number used to match parts
Manual cover	721.9604*	Series format; the * indicates a color/finish code

Why it matters

Using the exact model number helps us match the correct parts and diagrams for your range, especially for model-specific items like a surface element, control board, or the range oven temperature sensor EBG61305805.

Last updated: February 2026

If your Kenmore Elite electric range 72196047610 is not working, the most common causes are a tripped breaker or loose power cord connection, a control lockout setting, or a failed heating or control component. Start with power and settings checks, then test the heating circuits.

Quick checks first (no tools)

• Confirm the range has power: check the double-pole breaker (ranges typically use 240V).
• If the display is blank, reset power by turning the breaker off for 1 minute, then back on.
• Check for control lockout and basic settings (clock, timer, delay start) in the owner's manual.
• If the cooktop works but the oven does not (or the reverse), focus troubleshooting on that section only.
• Look for obvious signs of overheating or damage (burnt smell, melted wiring); stop and disconnect power if found.

What “not working” usually means (symptom-based)

Symptom	Most likely area	Common parts to suspect on this model
Nothing works (no lights, no display)	Power supply, terminal block/cord	House breaker, cord/connection (not a listed part)
Oven will not heat but display works	Oven heating circuit	Temperature sensor, control board, elements
Cooktop element will not heat	Surface element circuit	Radiant element, element control board
Oven heats erratically or wrong temp	Temperature sensing/control	Range oven temperature sensor EBG61305805

Parts that commonly fix “oven not heating”

If the oven will not bake, broil, or maintain temperature, these are the most common repair paths:

• Test the oven temperature sensor; a bad sensor can prevent proper heating or cause temperature swings.
• Inspect wiring connections to the sensor and control for looseness or heat damage.
• If the oven uses convection and that mode fails, the convection heater can be involved.
• If multiple oven functions fail, the electronic control can be the root cause.

Relevant model-matched parts on this page include:

• Range oven temperature sensor EBG61305805
• Range convection element MEE61925402
• Range broil element MEE61945104
• Wall oven control board EAJ62608105

Why it matters

An electric range can lose either the full 240V supply (nothing works) or just one leg of power (some functions work, others do not). Narrowing the symptom saves time and helps you choose the right Kenmore replacement part the first time.

Ordering the right part

We recommend matching by model number 72196047610 and confirming the symptom before ordering. You can order parts from the list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026