Frigidaire FFGF3054TBE free standing gas range Parts

Yes. Looking up parts by model number is the most accurate way to get compatible replacement parts for your Frigidaire FFGF3054TBE free standing gas range because it filters results to the exact burner, oven, and control components used on that unit.

How to find the model number on this range

For model FFGF3054TBE, the identification plate is on the right-hand surface of the oven front frame. You access it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your configuration). See the installation guide.

What to record from the plate:

• Model number (FFGF3054TBE)
• Serial number
• Lot number or letter (often used for production variations)
• Fuel type and gas pressure the range was adjusted for

How to use the model number to get the right part

Once you have the full model number, use it to narrow parts by system (surface burners, bake, broil, controls, door).

Tips that prevent wrong-part orders:

• Match the full model number exactly (letters and numbers)
• Compare the part name and part ID, not just a photo
• If multiple versions appear, use the lot/serial info to choose correctly
• Replace related wear items together when appropriate (for example, igniter and mounting hardware)

Common examples for this model

These are examples of parts you might see when searching by FFGF3054TBE:

Symptom	Common part category	Example part for this model
Oven will not heat	Bake ignition	Bake igniter 316489403
Oven temperature seems off	Temperature sensing	Frigidaire range oven temperature sensor (match by model)
No oven light	Light bulb	Appliance light bulb, 40-watt

Why it matters

Ranges often have look-alike parts that are not interchangeable across similar Frigidaire models. Using the exact FFGF3054TBE model number (and the serial/lot info) helps ensure proper fit, safe operation, and correct burner performance.

Last updated: February 2026

A Frigidaire Gallery oven typically lasts 10 to 15 years with normal household use. For your Frigidaire FFGF3054TBE gas range, consistent cleaning, correct burner setup, and addressing ignition or temperature issues early are the biggest factors in reaching that lifespan.

Typical lifespan and what affects it

Most modern ovens fall into a predictable service-life range, but usage and heat stress make a big difference.

• Light use (few times/week): often closer to 15 years
• Heavy use (daily cooking/baking): often closer to 10 to 12 years
• Heat and spills: baked-on spills and blocked airflow can shorten component life
• Power quality: surges can stress the control board and igniter circuits
• Maintenance habits: routine cleaning and correct burner cap placement help prevent failures

Parts that most often end the “working like new” phase

On gas ranges like the FFGF3054TBE, these parts commonly drive service calls as the unit ages.

Symptom	Common suspect part	Example part for this model
Oven will not heat, weak/no ignition glow	Bake igniter	Bake igniter 316489403
Oven temperature swings, under/over bakes	Oven temperature sensor	Frigidaire range oven temperature sensor 316490000
Broil not lighting	Broil igniter	Frigidaire range broil igniter 5304506545

How we recommend extending the life of your oven

These steps reduce stress on ignition and temperature-control components.

• Follow the cleaning and operating guidance in the FFGF3054TBE owner’s manual
• Keep burner caps and grates seated correctly so flames burn cleanly and evenly
• Wipe up spills after the oven cools to prevent smoke and corrosive residue buildup
• Avoid lining the oven bottom with foil (it can trap heat and affect baking performance)
• If preheating takes much longer than normal, test and replace the igniter early

Why it matters

A gas oven can “still work” while slowly losing performance. Catching early signs (slow preheat, uneven baking, broil failures) helps you replace a single part like an igniter or sensor instead of putting extra strain on the gas valve, wiring, or control board.

Last updated: February 2026

Frigidaire ovens like model FFGF3054TBE typically do not have a dedicated physical reset button. We reset most control glitches by turning power off at the breaker (or unplugging) for a few minutes, then restoring power and resetting the clock and oven function per the FFGF3054TBE owner's manual.

How to reset the oven controls (safe, common method)

1. Turn the oven OFF.
2. Shut power OFF at the circuit breaker (or unplug the range).
3. Wait 2 to 5 minutes.
4. Restore power.
5. Set the clock, then try Bake or Broil again.

If the display shows a lockout message: On many Frigidaire control panels, pressing OFF cancels an active feature and can also be used to activate or clear an oven lockout (some models).

What to do after a power outage

Your FFGF3054TBE uses electric ignition for the oven. During a power failure, do not try to operate the electric ignition oven; set all oven controls to OFF. When power returns, reset the clock and oven function.

• Turn all oven functions OFF during the outage.
• If a burner was on when power failed, verify the knob is OFF before power returns.
• After power is restored, set the clock and test Bake.
• Surface burners can be lit with a match during an outage (use extreme caution).

Quick troubleshooting: reset vs. a part problem

A reset helps with temporary electronic glitches. If the oven still will not heat, a failed ignition or sensing part is more likely.

Symptom	Most likely cause	What we check next
No heat in Bake, no glow from igniter	Weak/failed igniter	Inspect/replace bake igniter 316489403
Oven heats poorly or temps seem off	Sensor issue	Test/replace Frigidaire range oven temperature sensor 316490000
Broil will not light	Broil igniter issue	Inspect/replace Frigidaire range broil igniter 5304506545

Why it matters

Resetting power clears many control-board lockups without replacing parts. If the problem is ignition-related, replacing the correct Frigidaire igniter or temperature sensor restores safe, reliable burner operation and proper oven temperature control.

Last updated: February 2026

On the Frigidaire gas range model FFGF3054TBE, the model and serial number plate is on the right-hand surface of the oven front frame. You can see it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your configuration) and looking up at the front frame area; see the FFGF3054TBE installation guide.

Quick steps to locate the tag

• Make sure the oven is off and cool.
• Pull the lower drawer fully open (storage, warmer, or broiler drawer).
• Look at the right side of the oven front frame (the front frame just inside the oven cavity opening).
• Use a flashlight; the plate can be easier to read from a low angle.
• Write down model number, serial number, and any lot number/letter shown.

What the identification plate tells you (and why it matters)

The plate is more than a label; we use it to match the correct Frigidaire range parts for your exact build.

• Model number and serial number (for exact parts fit)
• Lot number/letter (helps narrow production variations)
• Burner ratings (BTU information)
• Fuel type and the gas pressure setting the range was adjusted for at the factory

Common places people check first (and why they miss it)

Place you might look	Typical result	Better check
Behind the control panel	Often nothing there	Lower drawer area on the front frame
Back panel of the range	Sometimes only wiring labels	Right-hand oven front frame
Inside the oven cavity	Usually no full ID plate	Open the lower drawer and look right

Tips for ordering the right parts

• Match the model number exactly: FFGF3054TBE.
• Use the model tag info before ordering ignition or oven parts like a bake igniter 316489403.
• If the tag is hard to read, take a clear photo with flash and zoom in.

Last updated: February 2026

If your Frigidaire FFGF3054TBE gas range smells like gas, treat it as a potential gas leak first: turn all burner knobs to OFF, do not light the range, and follow the “what to do if you smell gas” steps in the installation guide. Once the area is safe, a gas odor during operation often points to incomplete ignition, a weak igniter, or a burner/valve issue.

What to do right away (safety first)

• Turn all surface burner and oven controls to OFF.
• Do not try to light any appliance.
• Do not touch electrical switches or use a phone inside the home.
• Call your gas supplier from a neighbor’s phone and follow their instructions.
• If you cannot reach the gas supplier, call the fire department.

Common causes when the smell happens only during baking or broiling

A brief odor at initial ignition can happen, but a persistent gas smell usually means the gas is not burning cleanly.

• Weak or failing oven igniter (bake or broil)
• Burner not lighting promptly (delayed ignition)
• Clogged burner ports or misaligned burner parts
• Gas valve not opening/closing correctly
• Poor ventilation causing combustion byproducts to linger

Quick symptom guide

When you smell gas	Most likely area to check	Parts that commonly relate
Only on Bake	Bake burner ignition	Bake igniter 316489403
Only on Broil	Broil burner ignition	Frigidaire range broil igniter 5304506545
On cooktop burners	Surface burner ignition/fit	Surface burner head/cap alignment (cleaning and seating)

Checks we recommend after the area is safe

• Watch ignition: the burner should light within a few seconds; longer delays often mean an igniter problem.
• Inspect and clean: remove grates/caps and clear food spills from burner ports (do not enlarge ports).
• Confirm flame quality: steady blue flames are normal; large yellow flames suggest poor combustion.
• Verify ventilation: use the range hood or open a window during heavy oven use.

Why it matters

A gas smell can signal unburned gas or incomplete combustion. Addressing ignition and burner issues quickly helps your FFGF3054TBE heat properly and reduces the risk of unsafe operating conditions.

Last updated: February 2026