Kenmore 25367872504 refrigerator Parts

For Kenmore top-mount refrigerator model 25367872504, the exact exterior dimensions (height, width, depth) are listed in the product specifications section of the 25367872504 owner's manual. Use those measurements when planning cabinet fit, door swing clearance, and moving the refrigerator through doorways.

How to measure your refrigerator correctly

Even with published specs, we recommend confirming the size on your unit because leveling feet, hinges, and handles can affect clearance.

• Measure width at the widest point (often the cabinet or door edges)
• Measure height from floor to the top hinge cover area
• Measure depth from the back to the front of the doors (include handles if installed)
• Leave space behind the unit for airflow and water line routing (if you have an ice maker)
• Check that doors can open fully without hitting walls or cabinets

Typical size range for this style (helpful for planning)

Most Kenmore 253-series top-mount refrigerators fall into a common footprint range. Use this only as a planning estimate until you confirm the exact spec in the manual.

Measurement	Typical range for top-mount units
Width	29 to 33 inches
Height	65 to 69 inches
Depth (cabinet/doors)	28 to 33 inches

Why it matters

Correct sizing prevents installation problems like doors that cannot open fully, poor ventilation that can reduce cooling performance, and difficulty sliding the refrigerator into place. It also helps you plan for optional ice maker plumbing and service access.

Related setup tip (ice maker water line)

If your 25367872504 is connected to a household water supply for an ice maker, we recommend following the routing and slack guidance in the 25367872504 installation guide so the refrigerator can be pulled out for cleaning without stressing the water line.

Last updated: January 2026

On the Kenmore 25367872504 top-mount refrigerator, the upper section is the freezer compartment (often just called the freezer). It is the coldest area of the appliance and is designed to keep foods frozen while the lower section keeps fresh foods refrigerated.

What you will typically find in the upper (freezer) compartment

• Freezer shelves or a wire rack for organizing frozen foods
• Door bins for smaller items (these areas usually run a bit warmer)
• An air outlet or vent that circulates cold air
• A freezer temperature control or shared temperature control system
• In some setups, an ice maker or ice tray storage area

Freezer vs. refrigerator: quick comparison

Area	Common name	Primary purpose	Typical temperature
Upper section (this model style)	Freezer compartment	Long-term frozen storage	About 0°F
Lower section	Fresh food compartment	Short-term refrigerated storage	About 37°F to 40°F

Why it matters

Knowing the correct name helps when you are troubleshooting cooling issues, checking airflow, or ordering parts. For example, frost buildup or warm temperatures in the freezer can affect the entire refrigerator because cold air is circulated from the freezer into the fresh food section.

Helpful tips for better freezer performance

• Leave space between packages so cold air can circulate freely.
• Avoid overloading the freezer door bins; temperatures vary more at the door.
• Keep the refrigerator level so the doors close tightly (this supports stable temperatures).
• Do not block the toe grille; proper airflow helps the refrigerator run efficiently.
• Follow the recommended control settings in the 25367872504 owner's manual.

Last updated: January 2026

Yes. For Kenmore model 25367872504, the most reliable “reset” is a power reset: turn the temperature control to 0, disconnect power for about 5 minutes, then restore power and set temperatures back to normal; allow 24 hours for temperatures to stabilize (see the 25367872504 owner's manual).

Reset options that work most often

• Power reset (recommended first): control to 0, unplug (or switch breaker off), wait 5 minutes, restore power.
• After a power outage: verify the outlet and breaker are good, then do the power reset.
• Cooling complaint reset: after restoring power, set controls to normal and wait 24 hours before making more adjustments.
• If the unit will not run: confirm the control is not set to 0 and remember it may be in a defrost cycle (wait about 20 minutes and recheck).

Quick checklist after you “reset”

• Confirm the plug is fully seated in the outlet.
• Check the house fuse or reset the circuit breaker (use a 15-amp time-delay fuse where applicable).
• Make sure both doors close and seal fully.
• Keep air vents inside the refrigerator and freezer clear of food packages.
• Listen for normal operating sounds as the compressor and fans restart.

What to expect after resetting (timing)

What you notice	What it usually means	What to do
Lights on, no cooling yet	Normal restart delay	Give it time; recheck in a few hours
Runs, but temps drift	Controls recently changed	Wait 24 hours before adjusting again
No operation at all	Power or control set to 0	Verify outlet, breaker, and control setting

Why it matters

A reset clears minor control glitches and forces a clean restart, but it does not fix airflow problems, a weak door seal, or a failed component. If you are troubleshooting warm temperatures, checking door sealing and airflow first prevents repeat cooling issues.

Last updated: January 2026