Kenmore 72180593402 microwave Parts

The Kenmore microwave/hood combo model 72180593402 measures 29-15/16 inches wide, 16-7/16 inches high, and 15-3/8 inches deep (overall cabinet dimensions). These measurements come from the installation specifications in the installation guide.

Dimensions at a glance

• Width: 29-15/16 in.
• Height: 16-7/16 in.
• Depth: 15-3/8 in.
• Weight (helpful for planning): 52 lb

What to measure before you install or replace

Even with the correct overall size, we recommend confirming these fit points so the microwave mounts safely and vents correctly:

• Cabinet opening width (most over-the-range units fit a 30-inch space)
• Clearance above the range (follow the minimums listed in the installation guide)
• Back wall space for the mounting plate and duct cutout (if vented)
• Upper cabinet space for the power cord and any venting transition
• Door swing clearance so the handle and door do not hit nearby cabinets

Common fit notes (venting and mounting)

This model can be installed in different venting configurations depending on your kitchen setup. Use the installation guide to match your setup and avoid rework.

Fit item	What it affects	What to check
Width	Cabinet fit	30-inch cabinet space is typical
Height	Clearance over cooktop	Minimum clearance listed in the guide
Depth	Front projection	Door swing and cabinet trim clearance
Weight	Safe handling	Plan for a 2-person lift

Why it matters

Correct dimensions help prevent cabinet interference, ensure the mounting plate lines up properly, and keep the exhaust damper and ducting from binding. That protects airflow for the hood fan and helps the microwave sit level.

Last updated: February 2026

For Kenmore microwave/hood combo model 72180593402, the practical “reset” is a power reset: unplug the microwave (or switch the breaker off), wait about 1 minute, then restore power and set the clock. This clears many control glitches and restores normal operation (without changing hardware settings). See the owner's manual.

Quick reset steps (recommended)

• Press STOP/Clear once to cancel any active cooking cycle or timer.
• Unplug the microwave, or turn OFF the circuit breaker.
• Wait 60 seconds (2 minutes if the display stays lit).
• Restore power.
• Re-set the clock and test with a cup of water for 30 seconds.

If the microwave still will not run

The manual’s troubleshooting points for “microwave does not work” focus on power, door latching, and control inputs.

• Confirm the cord is plugged into a grounded 3-prong outlet.
• Check the household fuse/circuit breaker.
• Make sure the door is firmly closed and latched.
• Verify you pressed START after setting time/power.
• If you were using the oven as a timer, press STOP/Clear to cancel the Kitchen Timer.

What to check first (fast triage)

Symptom	Most likely cause	What we do next
Display is blank	No power to outlet/breaker tripped	Restore power, then retry reset
Display works, won’t start	Door not latching or START not pressed	Re-close door, press STOP/Clear, try again
Runs but no heat	Heating circuit issue	Use our guide: why is my microwave not heating

Why it matters

A power reset clears a “stuck” keypad state or interrupted cycle, which is a common reason a microwave appears unresponsive even though nothing is actually broken.

Last updated: February 2026

Kenmore microwaves are a solid choice for everyday cooking when they’re installed correctly, kept clean, and used as intended. For Kenmore model 72180593402, long-term satisfaction typically comes down to basic reliability factors like door-switch operation, ventilation upkeep, and avoiding misuse; our owner's manual covers the key operating and care practices.

What “good” usually means for a microwave/hood combo

Most owners judge a microwave/hood combo on consistent heating, dependable controls, and effective venting over the cooktop. In real-world use, Kenmore units are generally considered good value when you stay on top of routine maintenance.

Common strengths:

• Reliable day-to-day reheating and timed cooking
• Useful hood features like the exhaust fan and cooktop light
• Straightforward controls (clock, timer, child lock, add-minute)

Common pain points (typical across many brands):

• Door latch or interlock switch wear causing “won’t start” symptoms
• Grease buildup reducing airflow and increasing odors
• Heating issues tied to high-voltage components

Maintenance that makes the biggest difference

The manual emphasizes regular cleaning and filter care to keep performance steady.

We recommend:

• Clean interior surfaces with mild, nonabrasive soap and a soft cloth
• Keep the door and frame contact areas clean so the door seals properly
• Steam-clean stubborn soil by heating a cup of water for 2 to 3 minutes
• Keep the grease filter clean to maintain venting performance
• Replace failed cooktop lights promptly for safe stovetop visibility

Quick “good vs. not good” checklist

If your 72180593402 does this	It usually indicates
Heats evenly and runs quietly	Normal operation
Runs but does not heat	Heating circuit issue (often high-voltage parts)
Won’t start or stops when door moves	Door interlock or latch issue
Poor venting over the range	Grease filter or damper issue

Parts that commonly affect performance

If you’re troubleshooting, these model-matched parts are often involved:

• Microwave door interlock switch 6600W1K001D (start/no-start and door-related symptoms)
• Goldstar microwave grease filter 5230W1A012B (venting and grease control)
• Microwave magnetron 2B71165R (heating performance)

Why it matters

A microwave/hood combo works hardest in two ways: cooking and ventilation. Keeping airflow paths clean and ensuring the door safety switches work correctly helps prevent nuisance failures and keeps cooking results consistent.

Last updated: February 2026

Kenmore microwave/hood combo model 72180593402 is a 1.7 cu. ft. over-the-range microwave. You can confirm the listed oven capacity and other specifications in the model’s owner's manual.

How to confirm the capacity on your exact unit

Use these quick checks to match what you see on the appliance to the published specs:

• Look for the model and serial label at the upper side of the cavity front.
• Compare the model number on the label to 72180593402.
• Check the specifications section in the owner's manual.
• If you are measuring interior space, measure the usable cavity (not the door area).

Typical spec range for this style of Kenmore microwave

Over-the-range Kenmore microwave/hood combos in the 1.7 cu. ft. class commonly share these characteristics:

Spec	Typical for 1.7 cu. ft. OTR microwaves	What it affects
Capacity	1.7 cu. ft.	Cookware fit and usable space
Cooking power	About 900 to 1100 watts	Heating speed
Venting	Recirculating or outside venting	Installation options

Why it matters

Capacity (cubic feet) helps you choose correctly sized cookware and accessories, and it helps when replacing interior parts that must match the cavity size and turntable system.

Parts that commonly relate to cavity size and fit

If you are replacing interior accessories for model 72180593402, match parts by model to ensure proper fit:

• Microwave glass turntable tray MJS65336701
• Microwave turntable motor 6549W1S011M
• Microwave metal rack 5026W1A048C

Last updated: February 2026