Kenmore 3627331190 gas range Parts

Yes. Kenmore makes gas ranges, including the Kenmore 3627331190 gas range, and they are designed for everyday cooking tasks like baking, roasting, and broiling with gas heat. For model-specific features and operating details, use the 3627331190 owner's manual.

What “Kenmore gas range” means for parts and service

Kenmore is the brand on the appliance; parts support is handled by matching your exact model number to the correct components and diagrams.

• Use the full model number 3627331190 when ordering parts.
• Gas ranges commonly use an oven igniter, gas valve, burner components, and oven racks.
• Many symptoms (no bake, weak flame, no ignition) trace back to ignition or gas delivery parts.
• The manual typically includes a “problem solver” section for quick checks.
• For installation requirements like clearances and dimensions, follow the manual’s installation section.

Common parts customers replace on this model

These are examples of parts available for Kenmore 3627331190 that often relate to “does it still work like it should?” questions.

Symptom	Commonly involved part	Example part for this model
Oven will not heat	Oven igniter	Igniter WB2X9154
Oven light out	Appliance light bulb	40A15 bulb
No gas flow to oven burner	Oven gas valve	WB19K14 control valve

Why it matters

Kenmore made multiple gas range series over the years; using the exact model number ensures you get the right igniter, oven rack, or control components that fit and function correctly.

Last updated: February 2026

A Kenmore gas range like model 3627331190 typically lasts 15 years with normal household use. Consistent cleaning, correct burner flame, and prompt repair of ignition or gas-flow issues help you reach that lifespan.

Typical lifespan and what affects it

Most ranges reach their full service life when heat and gas components stay clean and properly adjusted.

• Heavy daily cooking can shorten lifespan
• Grease buildup and blocked airflow increase heat stress on parts
• Weak ignition can cause repeated clicking and delayed lighting
• Poor flame (yellow, lifting, or uneven) can overheat the oven cavity
• Skipping cleaning can lead to corrosion and stuck controls

Maintenance that helps you get the full 15 years

Use the care and cleaning guidance in the 3627331190 manual and keep these habits consistent:

• Clean spills quickly, especially sugary or acidic foods
• Keep burner ports clear and caps seated correctly
• Clean the oven interior using the recommended method (including self-clean guidance if equipped)
• Check that the oven ignites promptly and bakes evenly
• Replace worn ignition parts when symptoms start

Quick “repair now” symptom guide

Symptom	What it often points to	What to do next
Oven won’t heat or heats slowly	Weak/hot-surface igniter	Consider replacing the igniter WB2X9154
Gas smell when trying to bake	Ignition delay or gas valve issue	Stop using the oven; have it serviced
Uneven baking	Temperature control or airflow issue	Verify rack position and calibration steps in the manual
Clicking but no ignition	Ignition or gas supply problem	Inspect igniter and wiring; service if needed

Why it matters

A range that is lighting quickly and burning cleanly runs cooler at the controls and wiring, which reduces wear on high-cost parts like the oven gas valve and helps your Kenmore 3627331190 reach its expected 15-year lifespan.

Last updated: February 2026

To remove the top (cooktop) on a Kenmore gas range model 3627331190, we start by taking off the grates and burner pieces, then release any front or rear hold-down screws so the cooktop can lift up for service access. Use the 3627331190 manual for the exact fastener locations.

Before you start (safety and prep)

• Turn all burner knobs to OFF and let the grates cool completely.
• Shut off the gas supply at the range shutoff valve.
• Unplug the range (or switch off the circuit breaker).
• Protect the countertop with a towel or cardboard to prevent scratches.
• Keep a small container for screws so nothing gets lost.

Steps to remove the cooktop (typical for this style of range)

1. Remove the burner grates.
2. Lift off the burner caps.
3. If your burners have removable heads/bases, lift them straight up and set aside.
4. Look for mounting screws that secure burner bases or the cooktop (often near burner openings or under the front lip). Remove them.
5. Lift the cooktop from the front edge; if it hinges up, raise it and support it securely.
6. If the cooktop does not hinge, lift and slide as needed to clear tabs, then set it on a protected surface.

What you may see once the top is lifted

Area under the cooktop	What it does	What to check
Burner tubes/manifold	Routes gas to surface burners	Loose screws, corrosion, misalignment
Ignition wiring	Sends spark to igniters	Burned connectors, broken insulation
Gas regulator area	Controls gas pressure	Do not disturb unless converting fuel

Why it matters

Removing the cooktop is the first step for fixing common issues like weak ignition, uneven flames, or cleaning spillovers that clog burner ports. Correct reassembly also helps prevent ignition problems and gas odor.

Related part that’s commonly involved

If you are servicing the oven ignition system (not the surface burners), a common replacement is the igniter WB2X9154 (part number WB13K0003).

Last updated: February 2026

To tell how old your Kenmore stove is, we use the serial number (not just the model number) to decode the manufacturing date. For Kenmore model 3627331190, start by locating the model and serial tag, then use the serial format for the actual manufacturer behind the 362 prefix.

Step 1: Find the model and serial number tag

On most Kenmore gas ranges, the tag is typically found in one of these spots:

• Frame area behind the storage drawer or broiler drawer
• Oven door frame (around the front opening)
• Lower side trim near the front of the range
• Back panel of the range

For diagrams and common locations, use the 3627331190 manual.

Step 2: Use the Kenmore prefix to identify the manufacturer

Kenmore model numbers often start with a 3-digit prefix that points to who built the appliance.

What you have	What it tells us	What to do next
Model number (example: 3627331190)	Who manufactured it for Kenmore	Use that maker’s serial decoding rules
Serial number (letters and numbers)	When it was built	Decode date from the serial format

Quick tip

• The model prefix helps identify the manufacturer.
• The serial number is what typically contains the date code (month and year).

Step 3: Decode the serial number (the part that gives the age)

Once you have the serial number, match its format to the manufacturer identified by the prefix and decode the date.

Common outcomes after decoding:

• A letter indicates the month, followed by numbers for the year
• The first 2 digits indicate the year, and the next 2 indicate the week
• A month and year are embedded mid-serial (varies by maker)

Why it matters

Knowing the build date helps us match the right parts and instructions for your Kenmore gas range, especially for items that change over production runs (like an oven igniter, gas valve, or light socket). If your oven is slow to heat or won’t ignite, the igniter WB2X9154 is a common repair part for this model family.

Last updated: February 2026

On a Kenmore gas range like model 3627331190, the model number is printed on the appliance’s rating label, typically around the oven door frame area (often visible when you open the oven door) or on the lower frame behind the storage drawer.

Where to check first

• Open the oven door and look along the left or right door frame.
• Check the front frame just below the oven cavity opening.
• Pull out the storage drawer and look on the frame behind it.
• If your range has a broiler drawer, check the frame behind that drawer.

What the label looks like

Most Kenmore range model labels include:

• The model number (example: 3627331190)
• A serial number
• Gas and electrical ratings (BTU and voltage)

Use the diagrams and label callouts in the 3627331190 owner’s manual to match what you see on your range.

Quick ID tips (so you get the right parts)

• Write the model number exactly as shown, including all digits.
• If the label is greasy, wipe it gently with a damp cloth and a drop of dish soap; dry it.
• If the oven is not heating and you are checking parts, confirm the model number before ordering items like the igniter WB2X9154.

Common locations at a glance

Range style	Most common label location	Backup location
Freestanding gas range	Oven door frame	Behind storage drawer
Range with broiler drawer	Frame behind broiler drawer	Oven door frame

Why it matters

Kenmore ranges can look similar across multiple series, but parts like an igniter, oven rack, or gas valve must match the exact model number to fit and work correctly.

Last updated: February 2026