Kenmore Pro Gas cooktop Parts — Browse All Models

Top-selling replacement parts for Kenmore Pro gas cooktops

• Burner control valve. The burner control valve controls the gas supply going to the surface burner head.
• Burner igniter switch. The burner igniter switch sends current to the igniter electrode when you turn on the burner control valve.
• Burner head. The burner head evenly distributes gas through slots at the top of the burner head to create a cooking flame.
• Spark module. The spark module supplies the igniter electrode with electrical current to create an ignition spark for the burner.

How to replace a bad igniter switch on your Kenmore Pro gas cooktop

• Unplug the cooktop's power cord from the wall outlet and then close the gas supply shut-off valve.
• Remove all the cooktop grates and then lift the gas burner caps off the burner heads. Remove the screws that hold the burner heads in place and then remove the burner heads.
• Pull the control knobs off of the burner control valves. Remove the screws that secure the main top to the top of the burner orifice holders. Lift the main top off of the cooktop and set it aside.
• Pull the spark igniter switch off of the burner control valve and disconnect its wires.
• Push the new igniter switch onto the stem of the burner control valve and connect the wires.
• Position the main top on top of the burner orifice holders. Insert and tighten the screws that secure the main top to the orifice holders. Push the control knobs on the burner control valves.
• Position the burner heads in the correct locations, screw them into place and tighten the screws firmly. Cover the burner heads with the burner caps in the correct locations. Set the grates in place on the cooktop.
• Plug the power cord into the wall outlet and open the gas shut-off valve.