Singer Upright vacuum Parts — Browse All Models

Replacing the brush roll drive belt in your Singer upright vacuum

• Unplug the power cord to disconnect electrical power from the vacuum cleaner.
• Turn the vacuum cleaner over so the bottom of the nozzle assembly is facing up.
• Remove the screws from the bottom of the bottom plate.
• Pull the bottom plate off the nozzle assembly.
• Pull out the brush roll and remove the belt from the motor shaft and brush roll.
• Slide the new belt onto the motor shaft and slip the other end of the belt over the brush roll.
• Reinstall the brush roll into the nozzle assembly.
• Reinstall the bottom plate and secure it with the mounting screws.

Top replacement parts for Singer upright vacuums

• Pre-motor filter. The pre-motor filter traps contaminants from air flowing to the vacuum motor.
• Vacuum fan motor. The vacuum fan motor rotates the fan blades to create suction in the vacuum cleaner.
• On/off switch. The on/off switch controls electrical power going to the vacuum cleaner.
• Vacuum collection bag. The collection bag holds the dust and dirt the vacuum cleaner collects.
• Beater bar assembly. The beater bar assembly rotates to loosen dirt and debris so it's drawn into the vacuum. It includes the bearings that fit into the ends of the beater bar.