Kenmore Wet/dry vacuum Parts — Browse All Models

Top-selling Kenmore wet/dry vacuum replacement parts and accessories

• Cartridge filter. The cartridge filter traps dust and dirt from exhaust air when you vacuum dry areas using your shop vacuum.
• Foam sleeve filter. Remove the cartridge filter and install the foam sleeve filter when vacuuming liquids with your shop vacuum.
• Fine dust filter. Use the fine dust filter when vacuuming drywall dust, fireplace soot or ash.
• Drain cover. The drain cover seals the drain hole at the bottom of the canister. Remove the drain cover when draining the canister.

Replacing a caster wheel on your Kenmore wet/dry vacuum

• Unplug the wet/dry vacuum power cord from the wall outlet. Wear work gloves to protect your hands during the repair.
• Remove the motor assembly and empty the dust drum.
• Turn the dust drum upside down on the floor.
• Pull the existing caster wheel off the caster foot.
• Push the new caster wheel onto the caster foot and lock the new caster wheel in place in the caster foot.
• Turn the dust drum upright and reassemble the vacuum.