GE Range hood Parts — Browse All Models

Identifying the cause of symptom first helps you order the correct part and avoid unnecessary replacements.

If your hood’s fan or blower stops spinning, the motor bearings may be worn or the blower wheel may be obstructed.

When the hood lights won’t turn on or flicker after bulb replacements, the socket or internal wiring may be failing.

If smoke lingers while cooking or suction feels weak, check the ductwork and filters first. If they’re clear the blower motor, wheel or control board might be the root cause.

Here are some of the most frequently replaced parts, what they do, how you’ll know they’ve failed, and how to fix them.

• Blower motor: Drives the hood’s airflow system. If the motor hums but the fan doesn’t spin, install a new blower motor to restore ventilation.
• Light socket: Supplies power to the hood’s lighting. When bulbs fail despite being new, you may need to install a new light socket to restore illumination.
• Electronic control board: Manages fan speed, lights and sensors. If multiple hood functions stop working simultaneously, replace the control board.
• Blower wheel: Spins to move air efficiently. A cracked or mis-aligned wheel causes vibration or weak suction. Replacing it restores smooth airflow.
• Grease or charcoal filters: Trap grease and cooking odors. When clogged airflow drops and noise rises. Replace filters regularly for optimal performance.

OEM GE range hood parts from Sears PartsDirect are engineered for your model’s exact specifications. They ensure proper fit, dependable performance and long‐term reliability. You’ll also find detailed diagrams and repair resources to guide you through diagnosis and installation.

Look inside the hood beneath the light lens, on the underside panel, or on the rear panel near the motor housing. Using the exact model number ensures you order the correct parts.

Noise during fan operation often means worn motor bearings or a mis-aligned blower wheel. Inspect those parts and replace whichever shows signs of wear.

Weak airflow can stem from clogged filters, blocked ducts or a damaged blower wheel. Start by cleaning filters and checking ducts before replacing any component.

Clean grease filters every few weeks and replace if bent or damaged. Charcoal filters in recirculating models typically need replacement every 6-12 months depending on cooking frequency.

Generic parts may physically fit but may not meet GE’s design or performance standards. To ensure proper operation and safety, always match the replacement part to your exact model.