CONFIRM THE PART FITS

Refrigerator Water Filter Head WR17X20860

BEST SELLER

Part #WR17X20860

Replaced by #WR17X22074
?
Manufacturer substitution
This part replaces WR17X20860. Substitute parts can look different from the original.
Online Only Price
$71.48 | 
7% OFF Phone Price : $76.48
In Stock
For ZIP codes near Edit
60-day return policy
This part fits

Part Information

This water filter head (part number WR17X22074) is for refrigerators.

Water filter head WR17X22074 holds the water filter and connects the water lines to the water filter.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Reviews

Causes for Replacement
December 08, 2019

The original OEM part tends to need replacement when the pin activating water flow into the filter wears down and can no longer be opened (pushed up) by screwing on the water filter or bypass cap. Don't replace this part until you have verified that restricted water flow isn't being caused by a clogged filter, sediments in the line or filter head, or a defective selenoid controlled water valve in lower rear of frig.

Dutch M I, Sarasota, FL

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Not easy to install but patience helps
January 20, 2019

No instructions included, but a YouTuber really helped out. Getting the screws out of the old filter head and getting them back in takes a longer hex driver than I had...but I managed. Worst part is getting in the small space behind the Frig, between the enclosed cabinets which was so close to the kitchen Island. It helps to have another pair of hands nearby to help maneuver the Frig.

Cadum, Naples, Fl

1 person thought this review was helpful.

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours
Pretty straightforward install
January 13, 2019

Not sure why this had 4 wrenches. Simple to install. Need teflon tape for the threads and it's a bit tough to get the screws out from inside the fridge but otherwise a 15 minute job. Glad I did it myself.

jpaulr, Reisterstown, MD

1 person thought this review was helpful.

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour