Dryer Idler Assembly (replaces DC96-00882B, DC96-00882C) DC93-00634A

Noisy Dryer

Exactly what I was looking for. Rather easy to install.

Simple to install and lots of money saved

Tensioner pulley broke on my dryer. Found a video on YouTube on how to fix and found parts on sears direct.

iNSTALLED EASILY

Saved us a fortune in repair costs. Put on in 10 minutes, works perfectly

Easy to install

Bing, Bang, Boom!! Had the part switched out in no time at all.

The part is exactly the same as the original.

The Installation was very easy with no complications.

Was very easy to install

Took about 3 hours to refit having to dismantle the dryer and putting back together but at the end all worked well

merchandise

Replaced the belt and idler on my dryer; installing the new parts wasn't a problem, but reassembly can add time to the fix, an hour or so for me more or less.

Needs some design work

The idler arm received is slightly different than the above picture. My idler arm has a stamped hole for the retaining hardware/spacer. Where as the failed arm I replaced and also your picture shows a 'pressed through boss' type feature that can help the arm stay aligned with the drum and belt. As it is, at the moment, with both the spring and belt tensions and subsequent reactions on the arm, it is quite misaligned with the belt and drum. I don't suspect it will last very long. Something to consider? I might also add that if the 'boss' were even a little more exaggerated the idler arm would sit perfectly perpendicular to the 'spacer'. Thus last a lot longer.