LG LMWS27626S/00 refrigerator Parts

A bottom-mount refrigerator has the freezer compartment on the bottom and the fresh-food (refrigerator) compartment on top. On the LG LMWS27626S, this layout keeps everyday refrigerated items at eye level while frozen foods are stored in a lower drawer-style freezer (see the LMWS27626S owner's manual).

How the bottom-mount design works on this LG model

In a bottom-mount design, cold air is managed between compartments so the refrigerator section stays convenient for frequent access, while the freezer stays below.

Common features you will typically see on bottom-mount (bottom freezer) units like the LMWS27626S include:

• French doors or a wide refrigerator opening on top
• A pull-out freezer drawer on the bottom
• Separate temperature controls for refrigerator and freezer
• Better visibility and access to fresh foods
• More bending to reach frozen items

Bottom mount vs. top mount: quick comparison

Feature	Bottom mount (bottom freezer)	Top mount (top freezer)
Fresh food access	Easier (eye level)	Requires more bending
Freezer access	Requires bending	Easier (higher)
Typical layout	Drawer freezer	Swing-door freezer
Best for	Fresh-food heavy households	Freezer heavy households

Why it matters

Choosing a bottom-mount refrigerator is mostly about daily convenience. If you use the refrigerator section more than the freezer, the LMWS27626S-STYLE bottom freezer design reduces bending and makes it easier to organize and see fresh groceries.

Last updated: January 2026

On the LG LMWS27626S bottom-mount refrigerator, the most common “problem” we see customers describe is uneven cooling: the fresh food section warms up while the freezer stays cold. In this model, that usually points to airflow restrictions, door sealing issues, or a fan/sensor control problem (not a single universal defect). See the LMWS27626S manual for model-specific troubleshooting steps and control settings.

Quick checks we recommend first (no parts needed)

• Confirm the control panel is not in Display Mode (cooling disabled); “OFF” shows on the display when it is active.
• Verify the set temperatures are reasonable (typical defaults are 37°F refrigerator and 0°F freezer).
• Make sure air vents are not blocked by food packages (blocked vents can warm the refrigerator section).
• Check that both French doors close fully and the center mullion is folded in before closing the left door.
• Allow up to 24 hours for temperatures to stabilize after installation, moving, or big loading changes.

If the refrigerator section is warm but the freezer is cold

This symptom often comes down to air not moving correctly from the freezer to the fresh food compartment.

Common causes on LMWS27626S-STYLE French door units:

• Frost or ice buildup restricting airflow
• Evaporator fan not running consistently
• Temperature sensing/control issues
• Door not sealing, causing warm air intrusion

If you suspect a failed fan motor, the compatible replacement for this model is the refrigerator evaporator fan motor EAU63923603.

Symptoms and likely direction

What you notice	What it often means	What to check next
Freezer OK, fridge warm	Airflow problem	Vents, frost, evaporator fan
Both sections warm	Cooling system not running or disabled	Display Mode, power, condenser airflow
Fridge too cold, items freezing	Control setting or airflow aimed at food	Temp setting, food placement near vents

Why it matters

Uneven cooling can spoil food in the fresh food section even when the freezer seems “fine.” Catching airflow and door-seal issues early can prevent longer run times, excess frost, and temperature swings.

Last updated: January 2026

On the LG LMWS27626S refrigerator, the bottom refrigerator shelf removes by lifting the front edge up to unhook it from the rear supports, then sliding the shelf out. If it feels stuck, remove nearby bins or drawers first to create clearance. For diagrams and shelf locations, use the LMWS27626S manual.

Steps to remove the bottom refrigerator shelf

• Open both refrigerator doors fully.
• Remove food items from the shelf.
• If the shelf is blocked, pull out the crisper or Glide‘N’Serve drawer below it to full extension (or remove it) for extra room.
• Tilt the front of the shelf upward.
• Lift the shelf straight up to disengage the hooks from the side slots.
• Slide the shelf out of the compartment.

If the shelf will not come out

• Check for items wedged against the back wall or air vents.
• Make sure the shelf is not catching on the door bins when the doors are partially open.
• Lift higher at the front; the hooks must clear the slots before it will slide forward.
• If the shelf is glass, handle it with two hands and avoid twisting.

Quick reference: remove vs. reinstall

Task	What you do	What to watch for
Remove shelf	Tilt front up, lift up, pull out	Do not force glass against side walls
Reinstall shelf	Tilt front up, set hooks in slots, lower front	Confirm shelf is level and fully seated

Why it matters

Removing the bottom shelf the right way prevents broken glass, damaged shelf supports, and door-alignment issues caused by forcing the shelf past bins or drawers.

Last updated: January 2026

On the LG LMWS27626S, the “bottom part” is usually the freezer drawer area (often called the bottom freezer or Durabase area) on the inside, and the lower rear service area on the outside where key cooling components and airflow parts are located. See the LMWS27626S manual for the model’s feature names.

Common names for the “bottom part” (inside vs. outside)

Here are the most common terms customers use, depending on what you mean:

• Bottom freezer drawer: the pull-out freezer compartment at the bottom.
• Durabase: LG’s name for the large freezer storage bin area.
• Toe grille / kick plate (front lower trim): a cover at the bottom front on many refrigerators (naming varies by design).
• Rear lower access cover / machine compartment: the area behind the unit near the floor.
• Drain pan / defrost drain pan: catches defrost water near the bottom.

What you’ll find at the bottom of this model

For the LG LMWS27626S, the manual calls out bottom-freezer storage features (Durabase and divider). The exact naming of exterior covers can vary by revision, but the function is the same: protect components and allow airflow.

If you mean…	It’s commonly called…	What it does
Bottom storage inside	Bottom freezer drawer / Durabase	Stores frozen food; slides out for access
Bottom rear outside	Machine compartment / service area	Houses cooling-system support parts and airflow components
Water under the fridge	Defrost drain pan	Collects defrost water so it can evaporate

Why it matters

Using the right term helps you get the right diagram, instructions, or replacement part. For example, if you’re seeing water underneath, you may be dealing with the drain system and the refrigerator defrost drain pan MJS64151702, not the freezer drawer itself.

Quick tips when describing the “bottom part” to a tech or when ordering parts

• Say inside (freezer drawer/Durabase) or outside (rear service area).
• Note whether the issue is water, noise, warm temps, or a broken drawer/rail.
• If it’s water-related, check the drain path and drain pan first.
• If it’s airflow/noise-related, the condenser fan area is typically down low at the back.

Last updated: January 2026