Kenmore 79075663201 gas range Parts

A Kenmore gas range like model 79075663201 typically lasts 15 years with normal household use. Regular cleaning to prevent grease buildup, plus prompt repair of ignition and temperature issues, helps you reach that lifespan and keep baking and broiling consistent.

Most gas ranges reach their full service life when heat, gas flow, and controls stay in good condition.

• Cleaning habits: grease and food spills accelerate wear and can create unsafe flare-ups
• Ventilation: keeping the hood and filters clean reduces grease settling on the range
• Ignition health: weak igniters cause longer preheat times and strain components
• Temperature accuracy: a drifting sensor can lead to overworking the burner
• Usage level: heavy daily cooking shortens life compared to light use

Use the cleaning and care guidance in the 79075663201 owner's manual and stick to a simple routine.

• Wipe cooktop and burner areas after they cool
• Keep burner heads and caps seated correctly for an even flame
• Clean the oven interior as recommended (including self-clean steps when appropriate)
• Check for delayed ignition, clicking that will not stop, or uneven flames
• Replace failed lighting parts promptly so you are not cooking “blind”

If the range is near the 15-year mark, compare repair cost to overall condition.

Common parts tied to longevity (when symptoms match):

• Frigidaire range oven burner igniter 5303935066 for no-heat or slow-ignite oven complaints
• Oven probe 316233903 for temperature swings or inaccurate baking

A gas range that is clean and lighting properly runs more efficiently, heats more evenly, and avoids the grease buildup the manual warns can catch fire. That directly supports the expected 15-year lifespan.

Last updated: February 2026

On the Kenmore 79075663201 gas range, the most commonly replaced parts are ignition and heating-related items (igniters, burner heads/caps), plus wear items like the oven light bulb and temperature sensor. These parts take the most heat and use, so they fail first and cause no-heat, weak flame, or inaccurate baking.

• Oven burner igniter (oven will not heat or takes a long time to light), such as the frigidaire range oven burner igniter 5303935066
• Surface burner head (uneven flame, poor ignition), such as the range surface burner head 316212400
• Surface burner cap (flame lifts, burner won’t light evenly), such as the range surface burner cap, 9,500-btu (black) 316213500
• Oven temperature sensor/probe (baking temperature is off), such as the oven probe 316233903
• Oven light bulb (light out), such as the range oven light bulb 316538904

• Confirm the model number is 79075663201 on the appliance ID tag.
• Check for simple fit issues: burner cap seated flat and burner head clean and centered.
• For oven light issues, follow the power-off and bulb replacement steps in the 79075663201 owner’s manual.
• If you’re testing electrical parts (igniter, sensor), use a meter and inspect wiring connections for heat damage.

Replacing the right part first saves time and prevents repeat failures. For example, a mis-seated burner cap can mimic a bad igniter, and a drifting oven probe can make a good burner seem “weak” because bake times never match the set temperature.

Last updated: February 2026

If you can’t find a part for your Kenmore gas range model 79075663201, we can still get you to the right replacement by confirming the exact model and serial number from the appliance ID plate, then matching the part by diagram location, description, and function using the 79075663201 owner's manual.

• Locate the model and serial number plate on the right side of the oven front frame, inside the storage or warmer drawer compartment.
• Write down the full model number (79075663201) and the serial number exactly as shown.
• Search using the part name plus a symptom (example: “oven won’t heat” or “burner won’t ignite”).
• Compare your part to the exploded-view diagram location (burner, control panel, oven cavity, drawer area).
• If you’re replacing a common failure item, start with the most likely category (ignition, temperature sensing, lighting).

These are common parts customers look for on this model when troubleshooting:

• Frigidaire range oven burner igniter 5303935066 for bake ignition problems
• Oven probe 316233903 for temperature accuracy issues
• Range oven light bulb 316538904 for an oven light that won’t turn on

Using the exact model and serial information prevents ordering a look-alike part that won’t fit, won’t mount correctly, or won’t work with your range’s gas valve, burner tube, or control settings.

Last updated: February 2026

On Kenmore gas range model 79075663201, the model number is printed on the serial plate located on the right side of the oven front frame, inside the storage or warmer drawer compartment. Pull the drawer open to view the label and record both the model and serial number.

• Open the storage drawer or warmer drawer (whichever your range has)
• Look along the right side of the front frame behind the drawer
• Find the serial plate label; it lists the model and serial number
• Write the numbers down exactly as shown (including dots or dashes if present)
• Take a clear photo of the label for parts ordering and service records

We use the exact model number to match the correct Kenmore parts (burner components, oven igniter, oven light bulb, control overlay) and to pull the right diagrams and troubleshooting steps. A single digit difference can change which parts fit.

If you are replacing an oven ignition part, match your model number first, then compare the part description and ID. For example, the oven may use an igniter such as the frigidaire range oven burner igniter 5303935066 depending on the exact configuration.

For the official serial plate location illustration and product record section, use the 79075663201 owner's manual.

Last updated: February 2026