Kenmore 79074237710 gas range Parts

On Kenmore gas range model 79074237710, the model and serial number identification plate is located on the right-hand surface of the oven front frame. You access it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your configuration); see the 79074237710 installation guide.

Quick steps to locate the ID plate

• Turn the oven off and let it cool.
• Pull the bottom drawer straight out and open it fully.
• Look at the right-hand front frame of the oven opening for a metal or foil identification plate.
• Write down the model number, serial number, and any lot number/letter shown.
• Use that exact model number when ordering parts like an igniter, temperature sensor, or control board.

What the identification plate tells you (and why it matters)

The identification plate is more than a label. It helps match the correct parts and setup information for your exact range.

Item on plate	What it’s used for
Model number	Ensures you get the correct Kenmore gas range parts
Serial number	Helps confirm production series for service and parts lookup
Lot number/letter	Helps narrow down version changes within the same model
Fuel and pressure info	Confirms how the range was adjusted when it left the factory

If you still can’t find it

Use these checks to avoid missing the plate:

• Use a flashlight and look along the front frame edge, not the oven door.
• Check the right side only of the front frame first.
• If your drawer is hard to open, follow the drawer removal steps in the 79074237710 owner’s manual.

Why it matters

Kenmore model numbers can look similar across different series. Using the exact model and serial information helps prevent ordering the wrong gas valve, igniter, burner parts, or oven sensor for your range.

Last updated: January 2026

On the Kenmore gas range model 79074237710, the model and serial number are on the identification plate located on the right-hand surface of the oven front frame. You access it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your range configuration); see the 79074237710 installation guide.

How to find it (quick steps)

• Turn the oven off and let the range cool completely.
• Pull out and open the bottom drawer (storage, warmer, or broiler drawer).
• Look at the right-hand front frame of the oven opening.
• Find the identification plate (rating plate) with the model and serial number.
• Write down the model number, serial number, and any lot number/letter shown.

What the identification plate tells you (and why it matters)

The identification plate is more than a serial tag; it helps us match the correct parts and service information for your exact Kenmore range.

• Model and serial number (for correct parts lookup)
• Burner ratings (BTU information)
• Fuel type (natural gas vs. LP)
• Gas pressure setting the range was adjusted for at the factory

Common drawer types and what to do

Drawer you have	What to do	Where to look
Storage drawer	Pull it open fully	Right-hand oven front frame
Warmer drawer	Pull it open fully	Right-hand oven front frame
Broiler drawer	Pull it open fully	Right-hand oven front frame

Tips for reading the plate

• Use a flashlight; the plate can be hard to see in low light.
• Wipe dust or grease gently with a damp cloth; do not scrape the label.
• Take a clear photo so you can zoom in later.

Why it matters

Using the exact serial number helps ensure you get compatible components (like an igniter, temperature sensor, or gas valve) and avoids ordering a similar-looking part that does not fit.

Last updated: January 2026

If your Kenmore gas range model 79074237710 is not igniting, the most common causes are a weak oven igniter, a gas supply issue, or an airflow/venting problem. In normal operation, the igniter should glow and the burner should light within about 60 seconds; use the 79074237710 owner's manual for operating steps.

Quick checks (most common fixes)

• Wait long enough: bake and broil ignition can take 30 to 60 seconds after you turn the oven on.
• Confirm you have power: the oven uses electric ignition; it will not ignite during a power failure.
• Check for strong igniter glow: a dim or intermittent glow often points to a failing igniter.
• Make sure the oven vent is not blocked: the range needs fresh air for proper burner combustion.
• Verify gas supply: confirm the shutoff valve is open and other gas appliances work normally.

What “normal” ignition looks like

When you set Bake or Broil, current flows to the igniter; it glows like a light bulb. Once hot enough, the oven gas valve opens and the burner lights.

What you see	What it usually means	What to do
Igniter glows, burner lights within 60 seconds	Normal operation	No repair needed
Igniter glows but burner does not light (or takes much longer than 60 seconds)	Weak igniter or gas valve not opening	Inspect/replace the igniter first
No glow at all	Power/control issue, wiring issue, or failed igniter	Check power, then test components

Parts that commonly solve “no bake” ignition

For this model, the bake igniter is a frequent fix when the oven will not light or lights slowly: bake igniter 316489403.

Other parts that can be involved (depending on symptoms) include the oven gas valve and the oven control board, but we typically start with the igniter because it is the most common failure.

Why it matters

A weak igniter can prevent the oven gas valve from opening reliably, so the burner never lights or takes too long to light. That leads to no-heat complaints, long preheat times, and inconsistent baking.

Last updated: January 2026