Craftsman 48624219 dethatcher Parts

A Craftsman riding mower’s pull capacity depends on the tractor (not the Craftsman 48624219 dethatcher), plus traction, terrain, and hitch setup. For safe towing with the 48624219 attached, follow the low-gear, gradual-start, and slope precautions in the 48624219 owner's manual.

What actually sets the towing limit

We base towing decisions on control and stopping distance as much as “can it move.” Key factors include:

• Tractor transmission and gearing (low gear gives the most control)
• Tire traction and ballast (wheel weights, chains, proper tire pressure)
• Terrain and surface (flat dry turf vs. wet grass, sand, soft soil)
• Hitch height and load balance (too much tongue weight reduces steering)
• Load type (rolling cart vs. dragging load)

Safe towing guidelines to use with the 48624219 dethatcher

The manual emphasizes controlled operation and warns that braking and stability can change with an attachment.

• Start in first (low) gear; increase speed gradually
• Stay off steep slopes; drive up and down slopes, not across
• Slow down on rough ground, near ditches, and on hillsides
• Never allow riders on the tractor or attachment

Quick decision table

Situation	Practical guidance	Why it matters
Flat, dry lawn with a rolling cart	Light to moderate loads	Best traction and braking control
Wet grass, sand, soft soil	Very light loads only	Wheel slip and longer stopping distance
Any slope	Keep loads light; avoid heavy towing	Stability and braking risk increases
Dragging (log, sled, stuck object)	Avoid dragging loads	Shock loads can damage hitch and drivetrain

Why it matters

Overloading is most likely to cause loss of steering, poor braking, and instability. The 48624219 dethatcher safety rules focus on preventing those hazards, especially on slopes and rough terrain.

Hardware that helps keep the attachment secure

A loose connection can let the dethatcher sway and reduce control. Common parts include:

• U-bolt 48813
• Lawn tractor dethatcher attachment clevis pin 48812
• Agri-fab lawn tractor attachment hex nut, 5/16-in 43083

For tractor-specific tow ratings, use your tractor’s documentation. For replacement parts, order from the parts list for model 48624219 or search by model number on Sears PartsDirect.

Last updated: February 2026

For your Craftsman dethatcher model 48624219, we recommend matching parts by the model number first, then confirming the part name and hardware size in the parts diagram and owner's manual. This helps you order the correct spring tines, washers, nuts, and pins for your exact attachment.

The fastest way to match the right part

• Start with the full model number: 48624219 (this is the dethatcher model, not the tractor model).
• Use the repair parts list in the owner's manual to identify the exact part name and quantity.
• Match common hardware by size (examples in the manual include 5/16-in washers and 3/32-in cotter pins).
• If you are replacing wear items, check for bent, rusted, or missing pieces before ordering.
• Order directly from the parts list for this model, or search by model number on Sears PartsDirect.

Common Craftsman 48624219 parts customers replace

These are frequent wear or loss items on a dethatcher attachment:

What you need	What it does	Example part for this model
Spring tine	Rakes thatch from turf	Agri-fab lawn tractor dethatcher spring tine, 1/8-in diameter 46761
Clevis pin	Secures linkage points	Lawn tractor dethatcher attachment clevis pin 48812
Cotter pin	Locks pins in place	Agri-fab lawn tractor attachment cotter pin, 3/32-in 43055
U-bolt	Mounting hardware	U-bolt 48813

Tips to avoid ordering the wrong part

• Compare the part name and part ID (not just a photo).
• Confirm the diameter and thread size for hardware (for example, 5/16-in fasteners).
• Replace fasteners in sets when the manual lists multiple quantities (washers, lock washers, hex nuts).
• After installation, re-check for loose fasteners before each use (a key maintenance step for this dethatcher).

Why it matters

Using the correct Craftsman 48624219 dethatcher parts keeps the tine assembly aligned and the frame secure, which improves dethatching performance and reduces premature wear on mounting hardware.

Last updated: February 2026

The model number for the Craftsman equipment on this page is 48624219, which is a Craftsman dethatcher (lawn tractor attachment), not a 42-inch riding mower. For the correct 42-inch Craftsman riding mower model number, match the number from your mower’s ID label to the format shown in the owner's manual.

How to find the correct model number on a Craftsman 42-inch riding mower

We use the model number from the mower’s product ID label (not the deck size) to identify the right parts list and diagrams.

• Look for the product ID label under the seat, on the frame near the engine, or near the rear hitch plate
• Write down the full model number exactly as shown (letters and numbers)
• Record the serial number too; it helps confirm the correct parts breakdown
• If the label is dirty or faded, clean it gently and use a flashlight to read it
• Use the model number to search parts by model on Sears PartsDirect

Why this page shows model 48624219

Model 48624219 is the Craftsman dethatcher attachment. The manual for this attachment lists the model number on the decal attached to the dethatcher, and the repair parts list is organized under that same model.

Quick comparison

Item	What it is	Typical model number format
48624219	Dethatcher attachment (pull-behind)	486.xxxxx style attachment model
Craftsman 42-inch riding mower	Riding mower/tractor	Often an alphanumeric model (varies by series)

Why it matters

Using the wrong model number can send you to the wrong diagrams and lead to ordering hardware or attachment parts that do not fit your mower’s frame, deck, or hitch setup.

Last updated: February 2026

Craftsman model 48624219 is not a riding mower; it is a lawn tractor dethatcher attachment. This model number identifies the attachment, not the tractor, so it does not map to a single mower “year”. For model-specific identification details, use the 48624219 owner's manual.

How to identify the year for the tractor you tow it with

The year is tied to your tractor’s model number and serial number, not the dethatcher attachment. Use these steps:

• Look for the tractor’s model/serial label (commonly under the seat, on the frame rail, or near the engine)
• Write down the full tractor model number (letters and numbers) and serial number
• Keep the date of purchase if you have it; it helps narrow the production window
• Use the tractor model number to match the correct parts list and documentation
• If you are only seeing “48624219”, you are looking at the dethatcher’s decal, not the tractor’s

Where the model number is on the 48624219 attachment

The dethatcher’s manual specifies that the model number and serial number are on a decal attached to the dethatcher. That decal confirms the attachment model, not the mower.

Quick ID table

Item you’re checking	What the number tells you	Example outcome
Dethatcher decal	Attachment model and serial	Confirms 48624219 dethatcher
Tractor ID label	Tractor model and serial	Used to determine tractor year/parts

Why it matters

Ordering the right hardware and repair parts depends on matching the correct product. For the 48624219 dethatcher, common service items include spring tines, fasteners, and mounting hardware such as the agri-fab lawn tractor dethatcher spring tine, 1/8-in diameter 46761. For tractor year and tractor-specific parts, search by the tractor’s model number on Sears PartsDirect.

Last updated: February 2026